Enhanced Mechanical Properties by Cyclic Compression in TiNb/Zr-Based Metallic Glassy Composite

A significant enhancement of yield strength and large plasticity was obtained in TiNb/Zr₅₅Cu₃₀Al₁₀Ni₅ composite by cyclic compression at the yield point. This phenomenon resulted from the cooperation of the metallic crystalline alloy TiNb and metallic glassy matrix Zr₅₅Cu₃₀Al₁₀Ni₅ in the composite. It was found that a large dislocation density of TiNb was produced during cyclic compression, which resulted in the increase of the strength. Meanwhile, the improvement of plasticity of the composite benefited from the propagation of excess shear bands in the glassy matrix, which were produced during the cyclic compression process. Hence, the collective effect of both resulted in the improved yield strength and large plasticity of the composite.     

Propagation characteristics of the ten-parameter family of partially coherent general anisotropic gaussian schellmodel (AGSM) beams passing through first-order optical system

Abstract

Based on the closed property of AGSM beams under the action of first-order optical systems, the explicit transformation and twist expressions for the principal axes of intensity distribution, transverse coherence distribution and the principal curvatures of phase front in the cross-spectral density function of AGSM beams are derived. For typical applications, for AGSM beams passing through free space, the twist and variation regularities of the principal axes and the principal curvatures are analysed in detail. The twist-free conditions are discussed and the twist influenced by the physical parameters of the incident beam analysed. It is shown from the analysis that the principal curvatures of phase front are not zero at the reference planes where any of the corresponding principal axes of the beam spot obtains its minimum, and the conditions where the principal curvatures are zero is discussed.     

Material phase transformation at high heating rate during grinding

The modeling of maraging steel phase transformation in grinding process is presented in this article. Specifically, heating rate and contact zone temperature are examined to quantitatively link material properties, wheel topography characteristics and process parameters to the kinetics of diffusion-controlled transformation and diffusionless transformation. Physics-based modeling and prediction for the volume fractions of phase transformation in continuous heating under anisothermal conditions are developed based upon the addition of volume fractions in sequential segmented isothermal processes of grinding. The predictive model is validated by 18Ni (250) maraging steel grinding experiments, X-ray diffraction measurements and regression analyses. Results are compared to the model predicted of martensite and ferrite phase volume fractions after grinding. The physics-based model is experimentally validated as viable to predict the occurrence and extent of phase transformation related to material properties, wheel topography and grinding thermal-mechanical loading. Finally, correlation analysis is used to quantify the importance of the input variables to both model-predicted and X-ray diffraction measured phase transformation results.     

乳化液及空气吹扫装置在冷轧单机架中的应用

介绍了吹扫系统中两个关键工艺参数,分析了乳化液喷射梁、防缠导板的结构特点和功能,最后介绍了乳化液及空气吹扫装置在单机架六辊冷轧中的具体应用。     

A Multi-Radio Multi-Channel Assignment Algorithm Based on Topology Control and Link Interference Weight for a Power Distribution Wireless Mesh Network

Wireless Personal Communications - In this paper, a multi-radio multi-channel (MRMC) assignment algorithm based on topology control and link interference weight for power distribution wireless mesh...     

实现智能管道与智能运营的协同——流量经营解决方案探讨

首先分析了流量经营的13个典型业务场景,提出了流量经营的建设方案,包括流量经营的措施和整体体系架构。然后提出了以GGSN为中心面向网络的智能管道和综合网关面向业务智能运营的远期建设思路。最后,提出了GGSN智能分流和综合网关深度业务处理的近期建设方案和双策略控制接口。     

复杂条件下的深基坑施工与环境保护

背景工程地质条件复杂,且临近居民住房,又有市政管线挡道,为了使深基坑施工对周边环境的影响降至最小,采用钻孔灌注桩结合φ850 mm@600 mm三轴水泥土搅拌桩止水帷幕、2道钢筋混凝土水平内支撑及加打钻孔灌注桩内插钢立柱的竖向支撑,并采取分阶段、分块的开挖措施以减少土体内应力的集中释放。减少了基坑围护及土方开挖对周边住宅及道路、管线的影响,确保了工程正常开展,取得了较为显著的社会和经济效益。     

Discrete particle swarm optimization based multi-objective service path constructing algorithm

Aiming at previous research primarily focused on constructing service paths with a single objective,for exam-ple,latency minimization,cost minimization or load balance,which ignored the overall performance of constructed ser-vice paths,a multi-objective service path constructing algorithm based on discrete particle swarm optimization (MOPSO) was proposed.To promote the convergence rate and improve constructing performance,the criterions for selecting can-didate physical nodes and paths were explored,and a particle position initialization and update strategy (PIFC) was de-signed.Simulation experiments show that the proposed algorithms can improve the overall quality of service paths and increase the success rate and long-term average revenue.     

First-principles study of doping and distribution of Si in TiC

In this work, first principles calculations have been performed to study the doping and distribution of Si atoms in TiC lattice. The results confirm that Si atoms prefer to occupy Ti sites and their segregation on the TiC crystal surface may occur. But in the presence of carbon vacancies on the surface, Si atoms tend to be chemically adsorbed around the vacancies rather than occupy the carbon sites. It is also shown that the diffusion of Si may be very difficult in stoichiometric TiC, in particular the diffusion from bulk to surface. However, the carbon vacancies can considerably decrease the energy barrier and enhance the diffusion of Si atoms.