Transmission of medical messages of patient using control signal of cellular network

The healthcare system needs to track and monitor patients’ status and information. One of the most important requirements is that the patient is able to access the service anywhere at any time. Systems are being developed using the Internet to monitor patients’ status, and in some areas, especially rural areas and motorways, the Internet may not be available, even though the mobile network is available. In some cases, the network might be overloaded, so the patient information cannot be delivered to the hospital or medical centre. We propose a new method that uses the spare extension of the random access channel (RACH), which is carried by physical random access channel (PRACH) to send the patient information to the medical centre. We present the mathematical model of the channel and compare the results with another system from 3GPP to evaluate the results. The results show that the proposed method needs less time to transmit the patient’s information.     

Atmospheric deposition of carbon and nutrients across an arid metropolitan area

Urbanization is increasing rapidly in semi-arid environments and is predicted to alter atmospheric deposition of nutrients and pollutants to cities as well as to ecosystems downwind. We examined patterns of wet and coarse dry deposition chemistry over a five-year period at 7 sites across the Central Arizona-Phoenix (CAP) study area, one of two urban sites within the National Science Foundation's Long-Term Ecological Research (LTER) program. Wet and dry deposition of organic carbon (oC) were significantly elevated in the urban core; in contrast, mean annual wet and dry fluxes of nitrogen (N) were low (<6 kg ha(-1) yr(-1)) compared to previous estimates and did not differ significantly among sites. Wet deposition of sulfate (SO(4)2-) was high across CAP (mean 1.39 kg ha(-1) yr(-1) as S) and represented the dominant anion in rainfall. Dry deposition rates did not show strong seasonal trends with the exception of oC, which was 3-fold higher in winter than in summer; ammonium (NH4+) deposition was high but more variable. Dry deposition of NO3- and oC was strongly correlated with particulate base cations and dust-derived soluble reactive phosphorus (SRP), suggesting that urban-derived dust is scrubbing the atmosphere of acidic gases and entrained particles and increasing local deposition. Differences between measured and predicted rates of dry N deposition to the urban core may be explained by incomplete collection of gas phase N on surrogate deposition surfaces in this hot and arid environment. The extent of urban enhancement of cations and oC inputs to desert ecosystems appears to be restricted to the urbanized metropolitan area rather than extending far downwind, although a low number of sites make it difficult to resolve this spatial pattern. Nevertheless, wet and dry inputs may be important for biogeochemical cycles in nutrient and carbon-poor desert ecosystems within and near arid cities.     

Contamination of potable roof-collected rainwater in Auckland, New Zealand

One-hundred and twenty-five domestic roof-collected rainwater supplies in four rural Auckland districts were investigated in a cross-sectional survey to determine water quality. Samples of cold faucet water were analysed for physico-chemical and microbiological determinands, including metals (zinc, copper and lead), bacterial indicator organisms--heterotrophic plate count (HPC), total coilforms (TC), faecal coliforms (FC), enterococci (ENT), bacterial pathogens including Salmonella spp., Legionella spp., Campylobacter spp., Aeromonas spp. and the protozoa, Cryptosporidium and Giardia. Twenty-two supplies (17.6%) exceeded one or more of the maximum acceptable values (MAV) or maximum guideline values for chemical determinands of the New Zealand Drinking Water Standards (NZDWS) and 70 (56.0%) supplies exceeded the microbiological criteria of < 1 FC/100 mL. Eighteen supplies (14.4%) exceeded the NZDWS MAV for lead of 0.01 mg/L and three (2.4%) exceeded that for copper, of 2 mg/L. Those supplies with lead or galvanised iron comprising part of the roof or collecting system were more likely to show lead contamination (p = 0.019) as were those supplies with a pH less than 7 (p = 0.013). The presence of the indicator organisms HPC, TC, FC and ENT were all significantly correlated with one another. Aeromonas spp. were identified in 20 (16.0%) supplies. There was a positive association between the presence of Aeromonas and the bacterial indicator organisms. Households reporting at least one member with gastrointestinal symptoms in the month prior to sampling, were more likely to have Aeromonas spp. identified in their water supply than those households without symptoms (odds ratio 3.22, 95% CI 1.15-9.01, p = 0.021). Salmonella typhimurium was detected in one of 115 (0.9%) supplies. Legionella spp. and Campylobacter spp. were not detected. There were 50 supplies sampled for protozoa (sampling criteria: > or = 30 FC or > or = 60 ENT). Cryptosporidium oocysts were detected in 2 (4%) of these. Giardia was not detected. This study demonstrates that roof-collected rainwater systems provide potable supplies of relatively poor physiochemical and microbiological quality in the Auckland area. Further research is required on Aeromonas spp. as potential indicators of both microbiological quality and health risk along with design and maintenance strategies to minimise contamination of potable roof-collected rainwater supplies.     

Nanofluidic biosensing for beta-amyloid detection using surface enhanced Raman spectroscopy

Trace detection of the conformational transition of beta-amyloid peptide (Abeta) from a predominantly alpha-helical structure to beta-sheet could have a large impact in understanding and diagnosing Alzheimer's disease. We demonstrate how a novel nanofluidic biosensor using a controlled, reproducible surface enhanced Raman spectroscopy active site was developed to observe Abeta in different conformational states during the Abeta self-assembly process as well as to distinguish Abeta from confounder proteins commonly found in cerebral spinal fluid.     

Spontaneous emission from the C3 radical in carbon plasma

Spontaneous emission measurements are discussed for the Swings transitions of the C(3) radical in laser-generated graphite plasma, and the spectroscopy of the C(3) radical in carbon vapor and plasma is summarized. A review is given of some theoretical calculations and emission spectroscopic investigations are presented. Time-averaged, laser-induced optical breakdown spectra are reported from Nd:YAG laser generated graphite microplasma. In 200-300 Torr of argon and helium, and depending on the specific experimental configuration, a weak emission continuum is observed centered at 400 nm when using a laser fluence of typically 1 J/cm(2). Such continua were not detected in our previous experiments using focused laser radiation. The possibilities for the origin of this continuum are considered.     

Optimization of Blood Handling and Peripheral Blood Mononuclear Cell Cryopreservation of Low Cell Number Samples

Background: Rural/remote blood collection can cause delays in processing, reducing PBMC number, viability, cell composition and function. To mitigate these impacts, blood was stored at 4 °C prior to processing. Viable cell number, viability, immune phenotype, and Interferon-γ (IFN-γ) release were measured. Furthermore, the lowest protective volume of cryopreservation media and cell concentration was investigated. Methods: Blood from 10 individuals was stored for up to 10 days. Flow cytometry and IFN-γ ELISPOT were used to measure immune phenotype and function on thawed PBMC. Additionally, PBMC were cryopreserved in volumes ranging from 500 µL to 25 µL and concentration from 10 × 10⁶ cells/mL to 1.67 × 10⁶ cells/mL. Results: PBMC viability and viable cell number significantly reduced over time compared with samples processed immediately, except when stored for 24 h at RT. Monocytes and NK cells significantly reduced over time regardless of storage temperature. Samples with >24 h of RT storage had an increased proportion in Low-Density Neutrophils and T cells compared with samples stored at 4 °C. IFN-γ release was reduced after 24 h of storage, however not in samples stored at 4 °C for >24 h. The lowest protective volume identified was 150 µL with the lowest density of 6.67 × 10⁶ cells/mL. Conclusion: A sample delay of 24 h at RT does not impact the viability and total viable cell numbers. When long-term delays exist (>4 d) total viable cell number and cell viability losses are reduced in samples stored at 4 °C. Immune phenotype and function are slightly altered after 24 h of storage, further impacts of storage are reduced in samples stored at 4 °C.     

Application of PTFE based dry film lubrication to moulded plastic by electrophoretic deposition

Where the low friction properties of polytetrafluorethylene (PTFE) are required to enable the sliding of two or more plastic components upon one another, it can be structurally impractical and/or economically unattractive to form the components from monolithic PTFE. This is particularly so in the instance of complex or delicate parts. A solution is the use of an inexpensive and easily mouldable conductive plastic such as polypropylene or nylon 6, and applying PTFE to the active surfaces through electrophoretic deposition (EPD). Using EPD, substrates with both simple and complex geometries can be coated with consistent and conformal layers of various materials. This paper describes how it is achieved, from the pre-treatment of the basic conductive plastic substrate, through the application of the PTFE modified paint by EPD and the curing method using ultra violet light emitting diode (UV LED) technology, to the technique for determining and controlling the coating thickness by a nondestructive colorimetric method.     

Modelling mobile multimedia services

Future multimedia and Internet services will have more complex characteristics than the traditional service types. Accurate planning of mobile networks requires accurate prediction of traffic flows, which involves complex relationships between the services themselves, the mobility of users, and the business environment. This paper describes the work of the Mobile VCE services programme on new traffic models that take all three factors into account     

A spectroelectrochemical investigation of the influence of sodium diisobutyldithiophosphinate on silver dissolution in aqueous cyanide

Polarization studies have been carried out to determine the influence of diisobutyldithiophosphinate (DIBDTPI) on the dissolution of silver in cyanide solutions at pH 11. DIBDTPI was found to inhibit dissolution at concentrations similar to those used when this compound is applied as a flotation collector. The inhibition efficiency in 10^–2 mol dm^–3 CN^– was found to increase with increase in DIBDTPI concentration in the range 10^–6–10^–4 mol dm^–3, and with increase in time of exposure of the silver to the DIBDTPI solution. The inhibition efficiency found for 10^–4 mol dm^–3 DIBDTPI in quiescent 10^–2 mol dm^–3 CN^– solution at 23 °C was 64.6% and 95.0% for exposure times of 10 min and 2 h, respectively. These values are significantly less than those found previously for 2-mercaptobenzothiazole under the same conditions. Surface enhanced Raman spectroscopy showed that inhibition was associated with adsorption of DIBDTPI displacing cyanide from the silver surface. Voltammetry at 0.5 mV s^–1 indicated that adsorption of DIBDTPI involves charge transfer.