Evidence for Glass–glass Interfaces in a Columnar Cu–Zr Nanoglass

Comprehensive analyses of the atomic structure using advanced analytical transmission electron microscopy-based methods combined with atom probe tomography confirm the presence of distinct glass–glass interfaces in a columnar Cu-Zr nanoglass synthesized by magnetron sputtering. These analyses provide first-time in-depth characterization of sputtered film nanoglasses and indicate that glass–glass interfaces indeed present an amorphous phase with reduced mass density as compared to the neighboring amorphous regions. Moreover, dedicated analyses of the diffusion kinetics by time-of-flight secondary ion mass spectroscopy (ToF SIMS) prove significantly enhanced diffusivity, suggesting fast transport along the low density glass–glass interfaces. The present results further indicate that sputter deposition is a feasible technique for reliable production of nanoglasses and that some of the concepts proposed for this new class of glassy materials are applicable.     

Enterprise networks: The re-engineering of complex software systems

Today technology design can no longer be understood as a design process on a green site. Design and implementation of new technology are always dependent on existing technology and the way it is used by people. In this respect Software-Engineering has also changed to the characteristics of normal technology design taking into account existing computer systems. Experiences show that the conditions and needs of such Software-Reengineering projects are highly complex and differ in their special characteristics ranging from aspects of quality of existing system documentation to organizational structures of the computer departments concerned. The Task-Artifact Cycle presented here gives a suitable reengineering approach emphasizing both analysis and design in Software-Reengineering.     

GPU-based real-time approximation of the ablation zone for radiofrequency ablation

Percutaneous radiofrequency ablation (RFA) is becoming a standard minimally invasive clinical procedure for the treatment of liver tumors. However, planning the applicator placement such that the malignant tissue is completely destroyed, is a demanding task that requires considerable experience. In this work, we present a fast GPU-based real-time approximation of the ablation zone incorporating the cooling effect of liver vessels. Weighted distance fields of varying RF applicator types are derived from complex numerical simulations to allow a fast estimation of the ablation zone. Furthermore, the heat-sink effect of the cooling blood flow close to the applicator's electrode is estimated by means of a preprocessed thermal equilibrium representation of the liver parenchyma and blood vessels. Utilizing the graphics card, the weighted distance field incorporating the cooling blood flow is calculated using a modular shader framework, which facilitates the real-time visualization of the ablation zone in projected slice views and in volume rendering. The proposed methods are integrated in our software assistant prototype for planning RFA therapy. The software allows the physician to interactively place virtual RF applicator models. The real-time visualization of the corresponding approximated ablation zone facilitates interactive evaluation of the tumor coverage in order to optimize the applicator's placement such that all cancer cells are destroyed by the ablation.     

Solving a multi-level capacitated lot sizing problem with multi-period setup carry-over via a fix-and-optimize heuristic

This paper presents a new algorithm for the dynamic multi-level capacitated lot sizing problem with setup carry-overs (MLCLSP-L). The MLCLSP-L is a big-bucket model that allows the production of any number of products within a period, but it incorporates partial sequencing of the production orders in the sense that the first and the last products produced in a period are determined by the model. We solve a model which is applicable to general bill-of-material structures and which includes minimum lead times of one period and multi-period setup carry-overs. Our algorithm solves a series of mixed-integer linear programs in an iterative so-called fix-and-optimize approach. In each instance of these mixed-integer linear programs a large number of binary setup variables is fixed whereas only a small subset of these variables is optimized, together with the complete set of the inventory and lot size variables. A numerical study shows that the algorithm provides high-quality results and that the computational effort is moderate.     

B2C-E-Commerce als Treiber simultaner Veränderungen in IT-Struktur und Markenarchitektur

We analyze the influence of B2C e-commerce on IT structure and brand architecture based on conceptual considerations, a case study and an empirical survey. We first discuss the changes in transaction costs that are induced by B2C e-commerce. The effects of B2C e-commerce on IT structure and brand architecture, which are anticipated from a transaction cost perspective, are illustrated using a case study from the tourism industry. We conducted a quantitative study among 101 chief information officers (CIOs) and chief marketing officers (CMOs) from the most important consumer brand companies in Austria. The results of a correspondence analysis show that a high importance of e-commerce triggers a typical bundle of changes in IT structure and brand architecture, which point toward a stronger integration within and between these two structural elements. We therefore conclude that B2C e-commerce calls for a better coordination of those measures that impact IT structure and brand architecture.     

Transport properties in3He-4He mixtures near the superfluid transition

We report measurements of the temperature, density, and concentration gradients in³He-⁴He mixtures, induced by a vertical heat flux. The flat horizontal cell included two superposed capacitors and the density was determined by means of the dielectric constant method. The experiments were carried out on mixtures with mole fractionsX ₃=0.37, 0.15, and 0.05 at saturated vapor pressure, with special emphasis on the region near the superfluid transition. Our measurements under steady-state conditions give the conductivity , the thermal diffusion ratiok _T , and the coefficient of thermal expansion. We describe the singular behavior of these quantities in the neighborhood ofT (X). In the superfluid phase, we test with fair success a relation by Khalatnikov between gradX/ gradT and several static properties. From the relaxation times needed to attain steady-state conditions, and in combination with measured static and transport properties, we obtain in the normal phase the mass diffusionD, which diverges strongly asT is approached. In the superfluid phase, we test successfully a scaled relation that results from the solution of Khalatnikov's hydrodynamic equations. From our data the dispersion relations for scattered light are calculated: _o/q ² in both the normal and the superfluid phases and ₂/q ² in the normal phase.Research supported by NSF grant DMR 8024056.     

Bücherschau

Ohne Zusammenfassung     

The influence of taking uterine biopsies on the concentration of some steroids in the blood and in the uterus, on the ovarian activity, and on the sexual behaviour of the mare

It has been shown that stimulation of the uterus of mares by the daily taking of biopsies can result in the occurrence of oestrous symptoms. This is accompanied by some follicular growth and a progesterone content in the blood often higher than 1 ng/ml. The following observations suggest that this progesterone originates in the uterus and not in the ovaries: (1) no active corpora lutea appeared to be present in the ovaries after ovariectomy, (2) ovariectomized mares showed the same oestrous symptoms in similar experiments and even mating took place, (3) in the uterine biopsies the concentration of the compound referred to as "5.4", which is assumed to be easily convertible into progesterone, had already increased considerably in the second biopsy, (4) administration of stilboestrol reduced the rise of the progesterone level in the uterine biopsies as well as in the blood. The absence of oestradiol-17 beta in the ovarian follicles and the fact that ovariectomized mares also come into heat suggest that oestrogens cannot be held responsible for the oestrous symptoms in these mares. Our experiments demonstrate that the uterus can be involved in sexual behaviour and the formation of steroids.     

Stofftransport durch polymere und anorganische Schichten

Polymeric materials are to be found in an increasing number of applications. In many areas, however, their high permeability for substances such as gases or water vapour creates problems. Traditionally, additional barrier layers are deposited onto the polymeric substrates as a permeation barrier, i.e. as a barrier against the transport of substances. Typically, polymeric layers are deposited from solution in atmospheric pressure, inorganic layers in vacuum processes. Highest barrier properties can be achieved via multi layer systems from inorganic and organic layers. This article describes basic principles of the permeation of substances through layer systems, highlights the differences of the substance transport through polymeric materials and inorganic layers and gives consequences for the production of materials with high and ultra‐high barrier properties, on the basis of polymeric substrates     

Semi‐Solid Processing of Metal Alloys

Semi‐solid metal casting is an innovative technology for the production of near‐net‐shape parts with demanding mechanical properties. The paper describes different processing routes and materials for semi‐solid‐metal casting (SSM), which have been investigated and also partially developed at the Foundry‐Institute of Aachen University. The standard thixocasting process for aluminium, highly reactive magnesium alloys and steel alloys with high melting points was investigated under variation of a wide range of process parameters. Specially adapted pre‐material production and reheating methods were developed for different materials and their application and future potential is pointed out. The thixocasting experiments were executed on a modified high pressure die‐casting machine with a specially designed “step‐die” providing wall thicknesses from 0.5 to 25 mm. The mechanical properties were tested in dependence of the wall thickness and the metal velocity. The results of these examination show high tensile strength values in combination with very good elongations. The rheocasting process is a new SSM‐forming method with liquid melt as feed‐stock and a high recycling potential. The research results of RCP‐technology (Rheo‐Container‐Process) invented at the Foundry‐Institute and of the Cooling‐Channel‐Process for aluminium and magnesium alloys are promising and are presented in this paper. Studies on semi‐solid processing of magnesium alloys and mixtures of them were conducted by Thixomolding^TM. To establish the most adequate process parameters, the temperature and the mixture relations were varied. Using a mould for tensile test specimens, the mechanical properties and the microstructure evolution could be evaluated. The chemical composition of the different phases was determined using SEM and EDX technologies. Evaluations of the flowing properties were conducted using a spiral mould with a total length of 2m and a cross section of 20mm x 1.5mm.