An np‐control chart for inspection errors and repeated classifications

The np‐control chart has been used to monitor the conforming fraction in process production, and it is assumed that no classification errors occur during the inspection process. Increases in the sample size and/or the number of repeated classifications of the inspected items can reduce the impact of the classification errors. In this paper, an np ‐control chart is proposed, and the monitored statistics are based on the results of independent repeated classifications with classification errors during the inspection process. The aim of the proposed control chart is to have the same performance as a control chart without classification errors. Numerical examples illustrate the proposal. Copyright © 2011 John Wiley & Sons, Ltd.     

Role of initial texture on the plastic anisotropy of Mg-3Al-1Zn alloy at various temperatures

The effect of initial texture on the anisotropic properties of AZ31 Mg alloys was investigated on the basis of microstructure evolution after compression tests and Lankford parameter (r-value) experiments at various temperatures. Two kinds of sheets were used: one is the cast-and-rolled sheet, and the other is the strip-cast sheet. Compression tests were conducted up to a strain of 0.3 at temperatures of 200-400 °C, and tensile tests were performed to obtain the r-value at various temperatures (25-450 °C). The results showed that, at all test temperatures, the average r-value of the RD plane were greater than those of the ND and TD planes in the cast-and-rolled material. When comparing the average r-value of the RD plane, the cast-and-rolled material revealed much higher values than those of strip-cast material. It was observed that the cross-sectional shape of RD compressive specimens (the compression axis was parallel to the rolling direction) of cast-and-rolled materials changed from an initial circular shape to an ellipsoidal shape due to the plastic anisotropy. Compression processes of specimens were simulated using a finite element method where the Hill's anisotropic yield criterion was adopted. The simulated results were in a good agreement with experimental data.     

Single-element ultrasound transducer for combined vessel localization and ablation

This report describes a system that utilizes a single high-intensity focused ultrasound (HIFU) transducer for both the localization and ablation of arteries with internal diameters of 0.5 and 1.3 mm. In vitro and in vivo tests were performed to demonstrate both the imaging and ablation functionalities of this system. For imaging mode, pulsed acoustic waves (3 cycles for in vitro and 10 cycles for in vivo tests, 2 MPa peak pressure) were emitted from the 2-MHz HIFU transducer, and the backscattered ultrasonic signal was collected by the same transducer to calculate Doppler shifts in the target region. The maximum signal amplitude of the Doppler shift was used to determine the location of the target vessel. The operation mode was then switched to the therapeutic mode and vessel occlusion was successfully produced by high-intensity continuous HIFU waves (12 MPa) for 60 s. The system was then switched back to imaging mode for residual flow to determine the need for a second ablation treatment. The new system might be used to target and occlude unwanted vessels such as vasculature around tumors, and to help with tumor destruction.     

Kinetics of aluminum dross dissolution in sec-butyl alcohol for aluminum sec-butoxide

Al sec-butoxide (ASB) has been used as a precursor for activated aluminas but its cost is higher than any other type of precursor. This study was carried out on the dissolution kinetics for synthesis of the ASB from Al dross waste. The reaction was performed under the molar ratio of Al dross and sec-butyl alcohol (SBA) of 3 mol SBA/mol Al with a catalyst of 10^?3 mol HgI₂/mol Al and three different dissolution temperatures of 80, 90 and 100 °C. The Al reactant was used with Al dross of 3–5 mm size range. As a result of the experiment, the dissolution reaction gave a 65% yield after 24 h. The dissolution mechanism was determined by the shrinking core model assumed by the shape of spherical particles. Especially, the kinetic data were well fitted by a chemical reaction in the model. By the Arrhenius equation, the apparent activation energy was determined to be 40.9 kJ mol^?1 at the given reaction temperatures.     

Colloidal synthesis of ultrathin two-dimensional semiconductor nanocrystals

2D semiconductor quantum wells have been recognized as potential candidates for various quantum devices. In quantum wells, electrons and holes are spatially confined within a finite thickness and freely move in 2D space. Much effort has focused on shape control of colloidal semiconductor nanocrystals(NCs), and synthesis of 2D colloidal NCs has been achieved very recently. Here, recent advances in colloidal synthesis of uniform and ultrathin 2D CdSeNCs are highlighted. Structural and optical property characterization of these quantum-sized 2D CdSe NCs is discussed. Additionally, 2D CdSe NCs doped with Mn 2+ ions for dilute magnetic semiconductors (DMS) are presented.These 2D CdSe-based NCs can be used as model systems for studying quantum-well structures.