Relaxor Behavior of Ge-Doped TlInS2

The dielectric and pyroelectric properties of Ge-doped (0.1 mol %) TlInS₂ crystals are studied. The results demonstrate that TlInS₂ is a ferroelectric relaxor. The experimental data are used to evaluate, using the Vogel–Fulcher relation, the activation energy (0.045 eV), preexponential factor (f ₀ = 2 × 10¹³ Hz), and the dipole-freezing temperature (T _F = 142 K) and to determine the temperature range of the stable relaxor (nanodomain) state and the temperature of the transition to the ferroelectric (macrodomain) state, accompanied by an anomaly in the temperature-dependent pyroelectric coefficient.     

Synthesis and Sintering of Bi2Ti4O11

The conditions of Bi₂Ti₄O₁₁ formation are studied. It is shown that the process is diffusion-controlled and depends significantly on the heating rate. The optimal conditions for producing Bi₂Ti₄O₁₁ ceramics are determined. Cold pressing of Bi₂Ti₄O₁₁ ceramic powder at high pressures is shown to influence the unit-cell parameters and volume, positional parameters of Bi and Ti, and bond distances in the ferroelectric ceramics produced by subsequent sintering. The ferroelectric transition temperature decreases steadily with increasing densification pressure.     

Life Calculations for Header – PGV-1000 Steam Generator Connector Weld Joints under NPP Service Conditions

The procedure for calculating the life of header – steam generator connector weld joints is proposed. It allows for running out the material plasticity reserve upon static cyclic elastoplastic loading as well as operating conditions, local stress concentrations, and residual stresses after welding.     

A Mixed-Approach Analysis of Deformations in Pipe Bends. Part 3. Calculation of Bend Axis Displacements by the Method of Initial Parameters

A problem of deformation of a curved shell loaded by internal pressure, axial force, and temperature difference is discussed. Physical equations are derived whereby the displacements and angles of rotation of the line of centers of mass of cross sections of a shell are related to loading parameters. A general constitutive set of equations for a curved element during its deformation is given. Using a method of initial parameters, an analytical solution is obtained for the differential equations for displacements and angles of rotation of the center line allowing for the action of distributed forces and moments.     

Interaction of a ductile projectile with a brittle solid medium

The process of interaction of a ductile projectile with a many times harder brittle target is analyzed in the 500–1000 m/sec range of velocities. The effect of hardness of the target and its fragmentation on the penetration depth is shown.Translated from Problemy Prochnosti, No. 9, pp. 60–62, September, 1991.     

Acrylonitrile-based copolymers: Synthesis,characterization, and formation of ultrafiltration membranes utilized for the immobilization of proteins

Various high molecular weight copolymers of acrylonitrile and a vinyl comonomer containing an aryl amine, a pyridine, or an aliphatic hydroxyl group were synthesized via slurry polymerization techniques so as to contain from 1 to 15 mol % functional comonomer. The comonomer content was quantitated by ultraviolet absorbance, base titration of acid polymer salts, and/or relative chemical reactivity with trichloro-s-triazine. Thin films were cast from copolymer solutions, coagulated into unsupported ultrafiltration membrances, and characterized with respect to both water permeability and pore size distribution. Analysis by size exclusion chromatography of the membrane permeate of a pool of dextran fractions yielded a continuous distribution curve for membrane pore size over the range 1.5 to 70 nm. The ultrafiltration membranes were used for protein immobilization after appropriate chemical activation. The three distinct types of functional copolymers gave comparable results for α-chymotrypsin, with protein weight loadings of 6–12% and 40–65% retention of enzymatic specific activity.     

Experimental Study of Porous Gel Sintering

Formation and disappearance of closed pores in silica gel during sintering were experimentally detected using a light-scattering technique. The disappearance of closed pores is strongly influenced by the atmosphere in which the gel is sintered.