The use of probability theory in fracture mechanics—A case study

A probabilistic approach to fracture mechanics in the form of a typical case study is described wherein the integrity of a high-pressure water pipeline is assessed. An analysis methodology is discussed incorporating the probability density functions of defect sizes, the statistics of defect occurrences and the statistical distribution of material properties. This method enables the analyst to supply a very simple assessment of safety, based on the probability of failure (a single number) which may be compared to accepted industrial standards (e.g. 10⁻⁶ for nuclear applications). It is argued that this method often offers the only way to scientifically and economically assess the integrity of fracture prone structures.     

Depth of intergranular oxygen diffusion during environment-dependent fatigue crack growth in alloy 718

The elevated-temperture fatigue crack growth behavior in alloy 718, when subjected to a loading frequency lower than the transitional frequency of this alloy, is viewed as fully environment dependent. In this process, the crack growth increment per loading cycle is assumed to be equal to the intergranular oxygen diffusion depth at the crack tip during the cycle effective oxidation time. In order to identify the trend of this diffusion depth an experimental program was carried out on compact tension specimens made of alloy 718 at 650 °C in which fatigue crack growth measurements were made for cyclic load conditions with and without hold time periods at minimum load level. This work resulted in establishing a relationship correlating the intergranular oxygen diffusion depth and the value of the stress intensity factor range ΔK. This relationship, when integrated over the cycle effective oxidation time, results in a closed-form solution describing the environment-dependent fatigue crack growth rate. A comparison is made between the results of this solution when applied to different loading frequencies and the corresponding experimental results. This comparison shows good agreement between the two sets of results. Furthermore, by combining the parabolic rate law of diffusion and the equation for the intergranular oxygen diffusion depth, an explicit expression for the oxygen diffusivity of grain boundaries is derived. It is found that this diffusivity is both a ΔK- and a frequency-dependent parameter.     

Analysis of a resonant-cavity enhanced GaAs/AlGaAs MSMphotodetector

The authors have developed a 2-D device simulator for heterostructure metal-semiconductor-metal (MSM) photodetectors. They have incorporated a model of multilayer optics into the simulator and used it to analyze the temporal response of a resonant-cavity enhanced heterostructure with a confining buffer layer and a distributed Bragg reflector (DBR). The authors show that through fine tuning the layer thicknesses, optical resonance enhancement of the light absorption can be obtained     

Stabilization of high-impact polystyrene/ polyethylene blends

Commercial poly(styrene-b-butadiene) copolymers (SBS) can act as effective compatibilizers in blends between high-impact polystyrene (HIPS) and polyethylene (PE), allowing a fine dispersion of PE in the polystyrene matrix, with a good balance of stiffness and impact strength. However, when processed under more severe conditions (e.g. in multiple extrusions, which simulate customer's product scrap recovery), the above blends show rather poor stability and their useful properties are rapidly lost. That undesirable effect is mainly due to cross-linking of SBS, which thus looses its compatibilizing activity. A correlation has been found between the time-to-cross-linking of SBS rubber in a Brabender mixer and the rapid decay of mechanical properties. The analysis of the mixing process and the morphology examinations of the final blend sample by TEM seem to support the above hypothesis. A significant reduction of block copolymer degradation has been achieved by means of a suitable stabilization.     

Approximate methods of identifying dynamic systems

Translated from Izmeritel'naya Tekhnika, No. 7, pp. 8–9, July, 1992.     

Features of penetrating obstacles made of combined materials with strikers of different shape

Results of ballistic tests for obstacles made of combined materials in relation to striker shape are presented in the form of penetration curves. It is established that striker shape affects not only quantitative indices, but also the qualitative nature of these curves.Translated from Problemy Prochnosti, No. 1, pp. 60–62, January, 1992.     

D.c. conduction studies on thermally evaporated neodymium oxide thin films

Aluminium-neodymium oxide-aluminium thin film capacitors have been prepared by thermal evaporation and the d.c. conduction properties of these films have been studied. The thicknesses of the films have been determined by a multiple beam interferometer. The current-voltage power-law dependence showed that the conduction in these films is space-charge limited. The linear dependence of the current density on the square root of the applied field confirmed the exponential trap distribution. The trap density has been found to be of the order of 10²⁶ m^–3. It has also been observed that the Schottky type of conduction is predominant in the high-field region and the height of the Schottky barrier has been determined. It is seen that the conduction mechanism is an activated process with the activation energy decreasing with increasing field.     

Calculation of the integral parameters of rotor-type granulators

Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 4, p. 19, April, 1992.