Improving the emf and dc voltage measuring system (discussion paper)

The concept of a new system of emf and dc voltage measurements is and methods of its implementation capable to satisfy the predicted demands of the Russian economy for 2003–2010 are proposed as a matter of discussion. Translated from Izmeritel'naya Tekhnika, No. 10, pp. 34–37, October, 1998.     

Platinum concentrations in urban road dust and soil, and in blood and urine in the United Kingdom

Increasing Pt concentrations from vehicle catalysts have been reported from a number of countries. Analysis of Pt and Pd in soils and road dusts taken from areas of high and low traffic flows in SE England show concentrations of Pt in the range < 0.30-40.1 ng g-1 and Pd in the range < 2.1-57.9 ng g-1. Higher concentrations of Pt are associated with high traffic densities. Samples taken from streets of lower traffic flows were found to contain the lower concentrations of the ranges. Pilot studies of Pt concentrations in blood and urine using ICP-MS have been carried out. Platinum concentrations in whole blood were: precious metal workers, 780-2170, mean 1263 pmol l-1 (0.152-0.423, mean 0.246 microgram l-1); motorway maintenance workers, 645-810, mean 744 pmol l-1 (0.126-0.158, mean 0.145 microgram l-1); Imperial College staff, 590-713, mean 660 pmol l-1 (0.115-0.139, mean 0.129 microgram l-1). Platinum concentrations in urine in pmol Pt per mmol creatinine were: precious metal workers, 122-682, mean 273 [0.21-1.18, mean 0.47 microgram Pt (g creatinine)-1]; motorway maintenance workers, 13-78, mean 33.7 [0.022-0.135, mean 0.058 microgram Pt (g creatinine)-1]; Imperial College staff, 28-130, mean 65.6 [0.048-0.224, mean 0.113 microgram Pt (g creatinine)-1]. Detection limits were 0.03 microgram l-1 for both blood and urine. The possible health effects of increasing Pt in the environment are discussed. Platinum provides an excellent example of the significance of speciation in metal toxicity. Platinum allergy is confined to a small group of charged compounds that contain reactive ligand systems, the most effective of which are chloride ligand systems. Metallic Pt is considered to be biologically inert and non allergenic and since the emitted Pt is probably in the metallic or oxide form, the sensitising potential is probably very low. Platinum from road dusts, however, can be solubilised, and enter waters, sediments, soils and the food chain. There is at present no evidence for any adverse health effects from Pt in the general environment, particularly allergic reactions.     

Calculi with the greatest number

Translated from Kibernetika i Sistemnyi Analiz, No. 3, pp. 71–86, May–June, 1995.     

The Doppler Rayleigh lidar system at Arecibo

The instrument structure and the operation of a Doppler Rayleigh lidar located at the Arecibo Observatory in Puerto Rico are described. The device consists of an injection seeded, frequency doubled, Nd:YAG laser coupled with a small Newtonian telescope and a single etalon, Fabry-Perot interferometer in its receiver. With this combination of transmitter and receiver, observations of the Doppler spectral components of the Rayleigh backscattered signal from the atmosphere are possible. Neutral wind and temperature up to mesospheric heights are presented. The improvements to the instrument that are underway, which will allow an increase in the temporal and spectral sampling of the winds, are discussed     

Changes in activity of alpha amylase and its salivary isoenzyme in serum and urine after surgical treatment of ovarian neoplasms

Serum and urinary activity of alpha-amylase and isoamylase salivary was assessed in 40 patients with different types of ovarian cancer. The measurements were performed before surgical procedure and the 7th day after surgical removal of the tumor. Significant increases activity was found in patients with serosal ovarian cancer p < 0.001. On the 7th day after operation the activity of alpha-amylase and her of isoenzyme salivary reached control values.     

Applications of the finite difference techniques to the compensatedVIP 3 dB directional coupler

A new and simple compensated structure for a vertically installed planar (VIP) 3 dB directional coupler has been studied theoretically as well as experimentally by combining an improved 2-D-general finite difference (2-D-GFD) design procedure with a three-dimensional finite difference time domain (3-D-FDTD) method. The obtained full wave analysis results agree well with the measured ones. The investigations have shown that with this planar compensated structure, a better performance of the VIP coupler in the L-band can be realized by only using the same kind of dielectric substrate for its vertical and horizontal one     

Use of chemical fibre processing wastes for fabrication of thermoplastic composites

The behavior of the components of an inseparable mixture of processing wastes containing polyamide, polyacrylonitrile, and cellulose fibres was investigated. The possibility of using them in production of wood—polymer composites if cyclization in the structure of PAN and chemical reaction of basic and acid functional groups play the determining role in intensification of the interfacial interaction in the composite and correspondingly in increasing the strength properties of the final product, was demonstrated. The parameters of the process were optimized, and this allowed for obtaining materials with a static bending strength of up to 80 MPa, water absorption of up to 11%, and a degree of swelling of up to 8.3% according to GOST, which satisfies the requirements for brand ST_s-500 ultrahard board materials.St. Petersburg State University of Technology and Design. Wood Technology Academy, St. Petersburg. Translated from Khimicheskie Volokna, No. 6, pp. 39–44, November–December, 1996.     

Polarisation insensitive semiconductor optical amplifier withintegrated electroabsorption modulators

The authors demonstrate a 1.55 μm wavelength multiquantum well semiconductor optical amplifier, integrated with bulk layer electroabsorption modulators and passive waveguide beam expanders at the input and output ports. The device has a fibre to fibre gain of 9 dB, an extinction ratio of 15 dB per modulator, a spectral range >35 nm, and polarisation sensitivity <1 dB