Automated design system for an axial fan

Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 3, pp. 8–9, March, 1992.     

DSC study on simultaneous interpenetrating polymer network formation of epoxy resin and unsaturated polyester

A kinetic study on simultaneous interpenetrating polymer network formation of epoxy resin based on diglycidyl ether of Bisphenol A (DGEBA) and unsaturated polyester (UP) was performed by means of differential scanning calorimetry (DSC). Isothermal DSC characterizations of neat resins and their mixture (in a weight ratio of 50/50) were performed at different temperatures. Dynamic DSC characterization of the systems were performed at three different heating rates. A lower total heat of reaction developed during simultaneous polymerization in dynamic DSC tests was found, compared to the total heats developed during pure resins network formation. This phenomenon can be interpreted as an effect of network interlock that could not be compensated for completely by an increase in curing temperature. The kinetics of the reactions was described by empirical models. The DGEBA, in a 50/50 UP/DGEBA blend, indicated a higher rate constant than the pure DGEBA. The obtained results suggests that the hydroxyl end group of UP in the blend provided a favorably catalytic environment for the DGEBA cure. The results are in good agreement with the literature data. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2689–2698, 2002     

Intramuscular ceftriaxone compared with oral amoxicillin-clavulanate for treatment of acute otitis media in children

Two hundred and fifteen children aged 4 months 6 years with acute otitis media (AOM) were randomized to be treated either by a single i.m. injection of ceftriaxone, 50 mg/kg, with a second dose in the event of unsatisfactory response after 48 h or a history of recurrent AOM (109 patients) or amoxicillin clavulanate 12.5 mg tid (106 patients). The failure rate was similar in children treated by ceftriaxone and amoxicillin clavulanate, 4.6% and 4.7%, respectively (standard error for intergroup difference -2.87%, 95% confidence interval -5.62% to 5.87%). No significant differences between the groups were found in the dynamics of the resolution of the acute symptomatology, otoscopy findings, relapse rate at 30 days or tympanographic evidence of middle ear effusion at the scheduled visits on days 30, 60 and 90. Recurrence of AOM between days 31 and 90 was observed significantly in more children treated with amoxicillin clavulanate than with ceftriaxone--25 out of 84 (29.4%) versus 11 out of 81 (13.6%) (P = 0.012). Conclusion: Ceftriaxone injection(s) is as efficient at least as 10-day oral amoxicillin clavulanate for treatment of acute otitis media in children. Although not recommended as routine, ceftriaxone can be considered in the management of acute otitis media under special circumstances, particularly in cases when the ability to tolerate or absorb oral drugs is compromised, in children refusing or unable to take oral therapy or when the compliance is questionable.     

Is layering, harmful? [remote procedure call]

Remote procedure call (RPC) mechanisms over the US Department of Defense transmission control protocol. (TCP) can produce behavior analogous to the silly window syndrome because of a mismatched interface between the socket and the TCP modules. The detection and diagnosis of the problem are addressed. Some pointers to a design approach that could avoid the problems of mismatched communication layers are provided     

Differential regulation by hematopoietic growth factors of apoptosis and mitosis in acute myeloblastic leukemia cells

We evaluated the effects of various hematopoietic growth factors (HGFs) on the prevention of apoptosis in blasts from 19 patients with acute myeloblastic leukemia (AML) by assessing DNA ladder formation. After incubation without HGF, apoptosis was noted in all but two patients. HGFs prevented, did not affect, or enhanced apoptosis in 39 (60%), 14 (22%), or 12 (18%) of 65 suspension cultures, respectively. HGFs that prevented apoptosis also stimulated and/or synergized blast colony formation in 35 of 39 corresponding methylcellulose cultures. HGFs that alone stimulated colony formation also prevented apoptosis in all but two of 28 corresponding suspension cultures. In contrast, HGFs that did not prevent apoptosis also failed to stimulate growth in 17 of 26 corresponding methylcellulose cultures. HGFs that enhanced apoptosis alone never stimulated colony formation. After incubation, we noted enhanced c-fos and cjun genes as well as induction of p21 protein. An appropriate dose of HGF elevated c-fos, reduced c-jun and p21, induced G1/S transition, and inhibited apoptosis. In two patients, apoptosis was not induced after incubation. Cells not treated with HGF expressed no c-fos, c-jun, or c-myc, and remained in G0/G1. Taken together, our results support the conclusion that not only c-fos, cjun, and c-myc, but also p53 and p21 are required for blast apoptosis. HGF differentially prevents apoptosis and induces mitosis, and both events seem to be integral to the self-renewal of AML clonogenic cells.     

Elastic and Magnetoelastic Properties of an Iron–Carbon Powder Steel

The resonance frequency, internal friction, and emf of the double conversion are measured in samples of ZhGr steels of the variable density and carbon content by means of the resonance electromagnetic-acoustic conversion method. For the contactless excitation, the close correlation between the density (porosity) and the resonance frequency of the ultrasonic vibrations is obtained. It is shown that the magnetic state of the samples affects the internal friction. The dynamics of the field dependences of the emf is investigated with allowance for the internal friction in variation of the carbon content. This makes it possible to determine the optimum interval of the field for estimating this parameter.     

Thermal characteristics of packed bed storage system

The thermal behaviour of a packed bed storage system charged with hot air is modelled using two partial differential equations representing the energy conservation in the air and solid phases constituting the bed. These two equations are coupled through the heat exchange process between the two phases. A fully implicit numerical scheme based on forward, upwind and central differencing for the time, first and second space derivatives, respectively, is used to solve the modelling equations. Marching technique is used for the air equation and a tri-diagonal matrix solver is employed to solve the solid equation. The solution yields the thermal structure of the bed, namely the air and solid temperature distribution inside the bed at any particular time, and the variation of total energy stored in the bed with time. The effect of bed length, solid diameter and void fraction on the thermal characteristics of the packed bed is studied. Further, the performance of the bed under variable inlet air temperature and mass flow rate is investigated.     

Experience in developing ultrahigh capacity compressor stages

Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 2, pp. 4–7, February, 1992.     

OPTIMUM-AIV: A planning and scheduling system for spacecraft AIV

This paper presents a project undertaken for the European Space Agency (ESA). The project is developing a knowledge based system for planning and scheduling of activities for spacecraft assembly, integration and verification (AIV). The system extends to the monitoring of plan execution and the plan repair phases.

The objectives of the contract are to develop an operational kernel of a planning, scheduling and plan repair tool, called OPTIMUM-AIV, and to provide facilities which will allow individual projects to customize the kernel to suit its specific needs. The kernel shall consist of a set of software functionalities for assistance in the initial specification of the AIV plan, in the verification and generation of valid plans and schedules for the AIV activities, and in interactive monitoring and execution problem recovery for the detailed AIV plans. Embedded in OPTIMUM-AIV are external interfaces which allow integration with alternative scheduling systems and project databases.

The current status of the OPTIMUM-AIV project, as of May 1991, is that the architectural design of the system has been agreed on by ESTEC/ESA and detailed design and implementation is now underway, expecting a final delivery in October of 1991.