Influence of the ethylene–(methacrylic acid)–Zn2+ ionomer on the thermal and mechanical properties of blends of poly(propylene) (PP)/ethylene–(vinyl alcohol) copolymer (EVOH)

The thermal and mechanical properties and the morphologies of blends of poly(propylene) (PP) and an ethylene–(vinyl alcohol) copolymer (EVOH) and of blends of PP/EVOH/ethylene–(methacrylic acid)–Zn²⁺ ionomer were studied to establish the influence of the ionomer addition on the compatibilization of PP/EVOH blends and on their properties. The oxygen transmission rate (O₂TR) values of the blends were measured as well. PP and EVOH are initially incompatible as was determined by tensile tests and scanning electronic microscopy. Addition of the ionomer Zn²⁺ led to good compatibility and mechanical behaviour was improved in all blends. The mechanical properties on extruded films were studied for 90/10 and 80/20 w/w PP/EVOH blends compatibilized with 10 % of ionomer Zn²⁺. These experiments have shown that the tensile properties are better than in the injection‐moulded samples. The stretching during the extrusion improved the compatibility of the blends, diminishing the size of EVOH domains and enhancing their distribution in the PP matrix. As was to be expected, the EVOH improved the oxygen permeation of the films, even in compatibilized blends. Copyright © 2004 Society of Chemical Industry     

The Role of the γ/ γeutectic and porosity on the tensile behavior of a single-crystal nickel-base superalloy

The microstructure of a single-crystal nickel-base superalloy, PWA 1480, has been varied by heat treatment and hot isostatic pressing in order to study the role of the γ/yγ′ eutectic and porosity on subsequent tensile behavior. The level of porosity was found not to affect any of the tensile properties, while the γ/γ′ eutectic strongly influenced ductility. Eliminating the γ/γ′ eutectic increased ductility which was attributed to the cleavage fracture of this constituent. It is proposed that such cleavage of the γ/γ′ eutectic is initiated by the stress created from impinging slip bands, promoting shear localization, and final fracture along {111} slip planes. The precise nature of this fracture process is discussed with emphasis on the role of the γ/′ micro-structure. The deformation structure of PWA 1480 was also studied, and while different in some respects from many other single-crystal superalloys, its fracture process appears to be similar. Formerly Graduate Student, Department of Metallurgical Engineering and Materials Science, Carnegie Mellon University.     

Drying cellulose triacetate in a dryer with a vibrational fluidized bed

Conclusions The process of drying cellulose triacetate in a vibrating bed has been studied.For final drying of cellulose triacetate before solution, it is recommended to use an industrial specimen of a unit with a vibrating bed having a capacity of 2700 kg/h.This assembly can be used to dry other fibre-forming disperse polymeric materials containing strongly bound moisture.Translated from Khimicheskie Volokna, No. 3, pp. 49–51, May–June, 1984.     

H2S optimization for lignite liquefaction

Two lignite samples, Beulah No. 3 and Big Brown No. 1, were liquefied at 420 °C using H₂ and synthesis gas to determine the optimum beneficial amount of H₂S in the batch autoclave reactor. Under the conditions employed, 50–100 psi partial pressure of H₂S, nominally 4–10 wt% of daf lignite, was optimum for both samples. Synthesis gas outperformed H₂ with and without H₂S for the liquefaction of the two coals.     

Synthesis and characterization of an interpenetrating polymer network composed of poly(methacrylic acid) and poly(vinyl alcohol)

Temperature and pH‐responsive interpenetrating polymer network (IPN) hydrogels, constructed with poly(methacrylic acid) (PMAA) and poly(vinyl alcohol) (PVA), by a sequential IPN method, were studied. The characterization of IPN hydrogels was investigated by Fourier‐transform infrared spectroscopy, differential scanning calorimetry (DSC) and swelling under various conditions. The IPN hydrogels exhibited relatively high swelling ratios, in the range 230–380 %, at 25 °C. The swelling ratios of the PMAA/PVA IPN hydrogels were pH and temperature dependent. DSC was used for the quantitative determination of the amounts of freezing and non‐freezing water. The amount of free water increased with increasing PMAA content in the IPN hydrogels. Copyright © 2004 Society of Chemical Industry