Start-up and steady-state results of a full-scale UASB reactor treating malting wastewater.

An Imhoff tank was reconstructed into a 250 m3 UASB reactor in order to treat a malting plant wastewater. The UASB was inoculated with sludge from an anaerobic lagoon used for slaughterhouse wastewater treatment. After two months of operation the reactor achieved full load with an HRT of 17 h, a COD removal higher than 80% and a biogas production of 300 m3/day (77% average methane content), with an organic loading rate of 3.6 kgCOD/m3.d (0.24 kgCOD/kgVSS.d). A yield coefficient of 0.09 gVSS/gCODrem was found from a mass balance. The fat present in the inoculated sludge (48 mg/gSSV) did not affect the start up performance. Sludge from the inoculum with high content of fat (270 mg/gSSV), was separated by flotation in the first week of operation. The COD removal efficiency was scarcely influenced by the reactor operation temperature (17-25 degrees C).     

Desalination by distillation and by reverse osmosis — trends towards the future

As the requirement for fresh water increases worldwide, there is a need for more and more plants that are able to treat non-conventional water sources. Sea water has become an important source of fresh water in many arid regions. This feature provides an overview of recent process improvements in sea water desalination using reverse osmosis, multi-stage flash, multi-effect distillation and electrodialysis. Areas discussed include the use of alternative energy sources (wind energy, solar energy and nuclear energy) for reverse osmosis or distillation processes, and the impact of the different desalination process on the environment. Also covered are the implementation of hybrid processes in sea water desalination, and the pretreatment of desalination plants by pressure-driven membrane processes.     

Towards intelligent dressing

The aim of this article is to state the principles of an intelligent monitoring and control system for the grinding machine, comprising the dressing process as well as grinding stability.     

Radiative lifetimes of electrons and holes in a thin semiconductor layer

Radiative lifetimes of nondegenerate electrons and holes distributed uniformly in a semiconductor layer either deposited on a substrate or bounded by two dielectric media are calculated. The obtained expression takes into account the radiation reabsorbtion and interference effects and determines the dependences of the radiative lifetimes on the refractive indices of the external media and on the layer thickness.     

LiNbO3 optical waveguides formed in a new proton source

Proton-exchanged planar waveguides have been fabricated on Z-cut and X-cut lithium niobate crystals by using a new proton source formed by a mixture of benzoic and adipic acids. Waveguide index profiles and optical characteristics have been obtained at different values of the adipic-benzoic acid concentration ratio. The samples have been structurally characterized by Raman and infrared (IR) absorption spectroscopy and double-crystal X-ray diffraction. Good quality samples have been fabricated by using 30 mol% ratio dilution, showing very low scattering levels (<0.1 dB/cm), relatively high electrooptic coefficient (r₃₃=0.88 pm/V), and low relative percentage of interstitial protons (26%). The main factor limiting the waveguide optical properties is the substitutional-interstitial proton ratio, which can be easily controlled to produce good quality waveguides. A demonstration of the repeatability of the exchange process in the acid mixture is also provided     

Application of neural networks and machine learning in networkdesign

Communication network design is becoming increasingly complex, involving making networks more usable, affordable, and reliable. To help with this, we have proposed an expert network designer (END) for configuring, modeling, simulating, and evaluating large structured computer networks, employing artificial intelligence, knowledge representation, and network simulation tools. We present a neural network/knowledge acquisition machine-learning approach to improve the END's efficiency in solving the network design problem and to extend its scope to acquire new networking technologies, learn new network design techniques, and update the specifications of existing technologies     

Conditions for reliable dewatering systems based on voidless drainage in slightly permeable soils

Conclusions 1. Use of dewatering systems based on voidless drainage is most effective when dewatering slightly permeable soils in regions with a deep seasonal frost. 2. Two-story drainage with the upper and lower stories spaced 30 m apart accelerates the discharge of gravitational water from the arable layer. Results of observations on two-story drainage in experimental-production sections indicated that it discharges 2 – 3.8 times more water than systematic tubular drainage with an interdrain spacing of 10 m and a 0.2-m thick three-dimensional filter of a sandy-gravelly mixture. 3. It is recommended to use crushed stone and porous-clay gravel with a fineness of 10 – 20 mm as a filler. In that case, protection of the drain filler is, as a rule, required only from the intrusion of soil from above during construction in cohesive soils with a plasticity indexW _p≥7. 4. seepage rate in a voidless drain should be lower than the scouring velocity for the soil in which the voidless drainage is placed. In the opposite case, it is necessary to lower the grade of the drains or select a filler gradation such that the seepage rate in the drain be lower than the scouring velocity. Translated from Gidrotekhnicheskoe Stroitel’stvo, No. 8, pp. 41–43, August, 1998.