Topological Defects: Origin of Nanopores and Enhanced Adsorption Performance in Nanoporous Carbon

A scanning transmission electron microscopy investigation of two nanoporous carbon materials, wood‐based ultramicroporous carbon and poly(furfuryl alcohol)‐derived carbon, is reported. Atomic‐resolution images demonstrate they comprise isotropic, three‐dimensional networks of wrinkled one‐atom‐thick graphene sheets. In each graphene plane, nonhexagonal defects are frequently observed as connected five‐ and seven‐atom rings. Atomic‐level modeling shows that these topological defects induce localized rippling of graphene sheets, which interferes with their graphitic stacking and induces nanopores that lead to enhanced adsorption of H₂ molecules. The poly(furfuryl alcohol)‐derived carbon contains larger regions of stacked layers, and shows significantly smaller surface area and pore volume than the ultramicroporous carbon.     

Trimethylsilane-based pretreatments in a Mg-rich primer corrosion prevention system

A trimethylsilane-based coating was investigated as a pretreatment for Al-2024 T3 in a novel Mg-rich primer corrosion prevention system. SiC-based thin films were deposited onto Al substrates by plasma-enhanced chemical vapor deposition (PECVD). A screening study of the pressure (P) dependence of films deposited at 350 °C showed an increase in growth rate from 0.6 to 1.9 Torr. A second screening study where P was fixed at 1.9 Torr and temperature (T) was varied from 125 to 550 °C showed decreasing growth rates with increasing temperature with an apparent transition around 300 °C. Electrochemical impedance spectroscopy (EIS) of the SiC-based films on Al-2024 after exposure to a corrosive environment (i.e., dilute Harrison solution) indicated that samples coated using SiC-based films exhibit higher low frequency impedance (i.e., 100–1000× higher) than bare Al-2024 with open circuit potential remaining 0.1 V higher for the former suggesting the SiC-based films slow the corrosion process. A Mg-rich primer was coated onto the SiC on Al-2024 with the galvanic function of the system determined by EIS. As compared to SiC on Al-2024, a similar behavior for the low frequency impedance was observed for the Mg-rich primer-coated samples with some films exhibiting 1E + 8 Ω at 0.1 Hz indicating a strong barrier property. Initial gas jet erosion using acrylic media indicates the Mg-rich primer coatings are removed in preference to the Si–C films—the first step toward demonstrating a permanent pretreatment. When successfully developed and optimized, the value of such a hard, protective coating is the reduction of a three-component coatings system (i.e., pretreatment, primer, and topcoat) to a two-component system (i.e., primer and topcoat).     

The effects of practice with MP3 players on driving performance

This study examined the effects of repeated iPod interactions on driver performance to determine if performance decrements decreased with practice. Nineteen younger drivers (mean age=19.4, range 18-22) participated in a seven session study in the University of Calgary Driving Simulator (UCDS). Drivers encountered a number of critical events on the roadways while interacting with an iPod including a pedestrian entering the roadway, a vehicle pullout, and a lead vehicle braking. Measures of hazard response, vehicle control, eye movements, and secondary task performance were analyzed. Increases in perception response time (PRT) and collisions were found while drivers were performing the difficult iPod tasks, which involved finding a specific song within the song titles menu. Over the course of the six experimental sessions, driving performance improved in all conditions. Difficult iPod interactions significantly increased the amount of visual attention directed into the vehicle above that of the baseline condition. With practice, slowed responses to driving hazards while interacting with the iPod declined somewhat, but a decrement still remained relative to the baseline condition. The multivariate results suggest that access to difficult iPod tasks while vehicles are in motion should be curtailed.     

Synthesis and characterization of novel antimicrobial polymers containing pendent triclosan moieties

Novel antimicrobial copolymers were produced by first converting the commodity biocide, triclosan (TCS), to an epoxy-functional derivative, 2-((5-chloro-2-(2,4-dichlorophenoxy)phenoxy) methyl)oxirane (ETCS), and then reacting ETCS with polyethylenimine (PEI). While neither ETCS or PEI showed high antimicrobial activity toward either the Gram-positive bacterium, Staphylococcus epidermidis, or the Gram-negative bacterium, Escherichia coli, some the copolymers showed very high activity toward both bacteria. Antimicrobial activity for these copolymers was found to be highly dependent on both the molecular weight of the PEI utilized and the concentration of pendent groups derived from ETCS. In general, decreasing PEI molecular weight and increasing TCS pendent group concentration increased antimicrobial activity. Surface tension measurements showed that the molecular parameters affecting antimicrobial activity also affected surface activity in a similar fashion. Thus, it was speculated that the mechanism of antimicrobial activity associated with these copolymers involves interaction of the copolymers with the bacterial cell wall. A comparison of the antimicrobial activity of the most effective copolymers to TCS showed that the copolymers were more effective toward E. coli than pure TCS when compared using an equivalent TCS content (i.e. TCS pendent group content for the copolymers). This characteristic coupled with the fact that the TCS-containing copolymers are highly aqueous soluble liquids as opposed to a crystalline solid of limited solubility may afford utility of these copolymers for a variety of applications.     

The effect of growth parameters on the intrinsic properties of large-area single layer graphene grown by chemical vapor deposition on Cu

We present a comprehensive study of the parameter space for single layer graphene growth by chemical vapor deposition on Cu. The temperature is the most widely recognized control parameter in single layer graphene growth. We show that the methane-to-hydrogen ratio and the growth pressure also are critical parameters that affect the structural perfection and the cleanliness of graphene. The optimal conditions for suppressing double and multilayer graphene growth occur near 1000 °C, 1:20 methane-to-hydrogen ratio, and a total pressure in the range from 0.5 to 1 Torr. Raman mapping of a 40 × 30 μm² area shows single layer domains with 5–10 μm linear dimensions. Atomic resolution imaging of suspended graphene by aberration corrected scanning transmission electron microscopy shows that the single layer graphene consists of areas of 10–15 nm linear dimensions and smaller patches of residual contamination that was undetected by other characterization methods.     

The Effect of Size, Strain, and Long-Range Interactions on Ferroelectric Phase Transitions in KNbO3KTaO3KNbO3 Superlattices Studied by X-ray, EXAFS, and Dielectric Measurements

Epitaxial, uniformly strained superlattices of ferroelectric KNbO₃ and paraelectric KTaO₃ are studied with respect to their structural and dielectric properties. For dielectric measurements, perfectly lattice-matched conducting KNbO₃Sr(Ru_0.5Sn_0.5)O₃ electrodes are used, and a broad, frequency-dependent maximum is observed in the capacitance-vs-temperature curves. Niobium K-edge glancing-angle EXAFS provides information regarding the crystal structure of KNbO₃ films as thin as two unit cells in superlattices with equal KTaO₃ and KNbO₃ layer thicknesses, showing a clear difference between these thinnest-layer superlattices and films of the KNbO₃K(Ta_0.5Nb_0.5O₃ solid-solution. X-ray diffraction measurements, on the other hand, indicate that these samples exhibit the same transition temperature KNbO₃T_c, indicating the importance of long-range electrostatic interactions. Analysis of the transition temperature for various structures leads to a clear identification of the effect of size and strain on KNbO₃T_c.     

Using client feedback in psychotherapy training: An analysis of its influence on supervision and counselor self-efficacy.

Tracking client outcome and the therapeutic relationship across treatment (i.e., client feedback) has become a recommended practice for clinicians. This study investigated whether the utility of this practice would extend to trainees if the data gained from clients was provided to their supervisor for use within supervision. Trainees (N = 28) were assigned to a continuous feedback condition or no-feedback condition for 1 academic year. Results indicated that trainees in both conditions demonstrated better client outcomes at the end of their practicum training than at the beginning, but those in the feedback condition improved more. However, those in the feedback condition did not rate the supervisory alliance or satisfaction with the supervision process differently. The relationship between counselor self-efficacy and outcome was stronger for trainees in the feedback condition than for those in the no-feedback condition, perhaps indicating that feedback may facilitate a more accurate assessment of one’s skills. Implications of how counseling self-efficacy, the supervisory alliance, and satisfaction with supervision are related to effective supervision are addressed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Coping with indefinite and negative data in deductive databases: A survey

A problem with current database systems is the limitation placed on the type of data which may be represented and manipulated within such systems. In an attempt to broaden this to a wider class of data (i.e. rules as well as facts) and a more powerful set of manipulations, the concept of a deductive database was introduced. However, for the sake of efficiency the type of rule which is allowed in a deductive database is restricted in form. This paper surveys a number of attempts to move towards less restrictive forms of rules in deductive databases which allow indefinite and negative data to be handled.