A microfluidic device for thermal particle detection

We demonstrate the use of heat to count microscopic particles. A thermal particle detector (TPD) was fabricated by combining a 500-nm-thick silicon nitride membrane containing a thin-film resistive temperature detector with a silicone elastomer microchannel. Particles with diameters of 90 and 200 μm created relative temperature changes of 0.11 and ?0.44 K, respectively, as they flowed by the sensor. A first-order lumped thermal model was developed to predict the temperature changes. Multiple particles were counted in series to demonstrate the utility of the TPD as a particle counter.     

Use of oxygen isotope exchange in CO2 to characterize active sites

The characterization of carbon surface activity in the absence of gasification was attempted using oxygen isotope exchange in CO₂ over spectroscopically pure natural graphite, the surface activity being characterized by the rate of approach to isotopic equilibrium. The probable mechanism of exchange is via the first step in the carbon-CO₂ reaction, the dissociation of CO₂ over a carbon free site: $\text{CO}{}_2\text{+}\text{C}{}_{\mathrm{f}}\text{?}\text{i}{}_1\text{j}{}_1\text{C(O)}\text{+}\text{CO}$. Assuming this mechanism to hold for isotopic exchange, the theoretical rate equation was derived. The rate constants i₁, and j₁, were obtained from previous studies. Theoretical calculations show that the exchange rate is negligible over natural graphite at temperatures much below gasification conditions. Experimental verification of the theoretical analysis was not possible due to the activity of the quartz boat, holding the graphite, for catalyzing the exchange reaction. The exchange reaction was successfully followed over the Pt and CaO supported on a graphitized carbon black, in which case the activity was much, much greater than that ovgr the empty quartz boat.     

How In-Home Technologies Mediate Caregiving Relationships in Later Life

In-home technologies can support older adults' activities of daily living, provide physical safety and security, and connect elders to family and friends. They facilitate aging in place while reducing caregiver burden. One of older adults' primary concerns about in-home technologies is their potential to reduce human contact, particularly from cherished caregivers. In this exploratory in situ study, we provided an ecosystem of networked monitoring technologies to six older adults and their caregivers. We analyzed the amount and content of communication between them. The amount of noncomputer-mediated communication did not decrease through the 6-week study. The content of communication coalesced into four themes: communication about the technologies, communication facilitated by technologies, intrusiveness of technologies, and fun and playfulness with the technologies. Results suggest that in-home technologies, designed with sensitivity to older adults' primary motivations, have the potential to shape and tailor important relationships in later life.     

Parallel evolution using multi-chromosome cartesian genetic programming

Parallel and distributed methods for evolutionary algorithms have concentrated on maintaining multiple populations of genotypes, where each genotype in a population encodes a potential solution to the problem. In this paper, we investigate the parallelisation of the genotype itself into a collection of independent chromosomes which can be evaluated in parallel. We call this multi-chromosomal evolution (MCE). We test this approach using Cartesian Genetic Programming and apply MCE to a series of digital circuit design problems to compare the efficacy of MCE with a conventional single chromosome approach (SCE). MCE can be readily used for many digital circuits because they have multiple outputs. In MCE, an independent chromosome is assigned to each output. When we compare MCE with SCE we find that MCE allows us to evolve solutions much faster. In addition, in some cases we were able to evolve solutions with MCE that we unable to with SCE. In a case-study, we investigate how MCE can be applied to to a single objective problem in the domain of image classification, namely, the classification of breast X-rays for cancer. To apply MCE to this problem, we identify regions of interest (RoI) from the mammograms, divide the RoI into a collection of sub-images and use a chromosome to classify each sub-image. This problem allows us to evaluate various evolutionary mutation operators which can pairwise swap chromosomes either randomly or topographically or reuse chromosomes in place of other chromosomes.     

Homopolymer Nanolithography

Future progress in nanoscience and nanotechnology necessitates further development of versatile, labor‐, and cost‐efficient surface patterning strategies. A new approach to nanopatterning is reported, which utilizes surface segregation of a smooth layer of an end‐grafted homopolymer in a poor solvent. The variation in polymer grafting density yields a range of surface nanostructures, including randomly organized pinned spherical micelles, worm‐like structures, networks, and porous films. The capability to use the polymer patterns for site‐specific deposition of small molecules, polymers, or nanoparticles is shown. This versatile strategy enables patterning of curved surfaces with direct access to the substrate and no need in changing polymer composition to realize different surface patterns.     

Time-of-Flight Optical Ranging System Based on Time-Correlated Single-Photon Counting

The design and implementation of a prototype time-of-flight optical ranging system based on the time-correlated single-photon-counting technique are described. The sensor is characterized in terms of its longitudinal and transverse spatial resolution, single-point measurement time, and long-term stability. The system has been operated at stand-off distances of 0.5-5 m, has a depth repeatability of <30 mum, and has a lateral spatial resolution of <500 mum.     

Multilayer dielectric structure for enhancement of evanescent waves

We describe a type of multilayer dielectric coating designed to enhance the intensity of evanescent waves. The coating consists of a stack of alternating high- and low-index quarter-wave layers followed by a final low-index layer whose thickness is chosen to optimize the evanescent-wave intensity. Indirect measurements of the film properties are in good agreement with theory.     

Reversible suppression of the so-called fishtail effect in ultra pure single crystals of YBa2Cu3O7−δ achieved by proper oxygenation

We report on the absence of the so-called fishtail or peak effect in the magnetisation curves of properly oxygenated high purity (5N) single crystals of YBa₂Cu₃O_7–. As we recently reported [1] high pressure oxygenation procedures are suitable to produce a monotonous dependence of the critical current density with the magnetic field. In this article we report furthermore how to reversibly produce or remove this effect on the same crystal by proper oxygenation methods. Along with the high purity of the samples, — due to crystal growth in non reactive BaZrO₃ crucibles —, this proves that at least in pure samples the fishtail effect is due to different oxygenation states and/or oxygen distributions. In less pure samples, however, other sources for this anomaly like metallic impurities can act as an additional source for the fishtail anomaly.     

Components for the implementation of free-space optical crossbars

We describe an optical system developed to form the basis of a 64 × 64 free-space optical matrix-matrix crossbar switch. The design and performance of each of the main optical components is discussed: lenses, diffractive optical elements, and polarizing beamsplitters, together with the optomechanical hardware design. For these components, throughput levels of -6.9 dB have been achieved, which is compatible with full system operation at 10(-12) bit error rates at ≥270 Mbits s(-1).