Processing and electromechanical properties of high-coercive field ZnO-doped PIN-PZN-PT ceramics

This study explores sintering and piezoelectricity of ZnO-doped perovskite Pb(In_1/2Nb_1/2)O₃-Pb(Zn_1/3Nb_2/3)O₃-PbTiO₃ (PIN-PZN-PT) ceramics. The enhanced densification of ZnO-doped PIN-PZN-PT is attributed to the formation of oxygen vacancies by the incorporation of Zn²⁺ into the perovskite B-site and increased rate of bulk diffusion relative to undoped PIN-PZN-PT. Incorporation of Zn²⁺ into the perovskite lattice increased the tetragonal character of PIN-PZN-PT as demonstrated by tetragonal peak splitting and increased Curie temperature. Sintering in flowing oxygen reduced the solubility of Zn²⁺ in the perovskite lattice and resulted in rhombohedral PIN-PZN-PT. Sintering in oxygen prevented secondary phase formation which resulted in a high-piezoelectric coefficient (d₃₃ – 550 pC/N), high-coercive field (E_c – 13 kV/cm), and high-rhombohedral to tetragonal phase transition temperature (T_r-t – 165°C). We conclude that ZnO-doped PIN-PZN-PT ceramics are excellent candidates for high-power transducer applications.     

Electrocatalyst materials for fuel cells based on the polyoxometalates—K7 or H7[(P2W17O61)Fe(H2O)] and Na12 or H12[(P2W15O56)2Fe4(H2O)2]

Free acids of the iron substituted heteropoly acids (HPA), H₇[(P₂W₁₇O₆₁)Fe^III(H₂O)] (HFe1) and H₁₈[(P₂W₁₅O₅₆)₂Fe^III₂(H₂O)₂] (HFe2) were prepared from the salts K₇[(P₂W₁₇O₆₁)Fe^III(H₂O)] (KFe1) and Na₁₂[(P₂W₁₅O₅₆)₂Fe^III₄(H₂O)₂] (NaFe4), respectively. The iron-substituted HPA were adsorbed on to XC-72 carbon based GDLs to form HPA doped GDEs after water washing with HPA loadings of ca. 1 μmol. The HPA was detected throughout the GDL by EDX. Solution electrochemistry of the free acids are reported for the first time in sulfate buffer, pH 1-3. The hydrogen oxidation reaction was catalyzed by KFe1 at 0.33 V, with an exchange current density of 38 mA/cm². Moderate activity for the oxygen reduction reaction was observed for the iron substituted HPA, which was dramatically improved by selectively removing oxygen atoms from the HPA by cycling the fuel cell cathode under N₂ followed by reoxidation to give a restructured oxide catalyst. The nanostructured oxide achieved an OCV of 0.7 V with a Tafel slope of 115 mV/decade. Cycling the same catalysts in oxygen resulted in an improved catalyst/ionomer/carbon configuration with a slightly higher Tafel slope, 128 mV/decade but a respectable current density of 100 mA/cm² at 0.2 V.     

Microstructure and Mechanical Properties of Mullite–Silicon Carbide Composites

Mullite-SiC-whisker composites were prepared by powder processing using two commercial SiC whiskers. These composites were prepared by sintering rather than hot-pressing. A mulliteSlC-powder composite and a base line mallite material were also prepared for comparison with the two whisker composite materials. Fracture toughness measurements showed significant enhancement in only one of the whisker composite materials. The microstructure of the four materials was examined by scanning electron microscopy and transmission electron microscopy to assist in the explanation of the mechanical behavior of these composites. The examinations suggested that most of the toughening results from second-phase particles, with only limited toughening from effects associated with whiskers per se. In one case, higher toughness was partially associated with the formation of sialon phase by reaction with the whiskers and the furnace environment.     

Liquid chromatography–electrospray ionisation mass spectrometry method for the rapid identification of citrus limonoid glucosides in citrus juices and extracts

A rapid and selective liquid chromatography–electrospray ionisation mass spectrometry (LC–ESI-MS) method to screen citrus samples for limonoid glucosides and estimate their relative concentrations has been developed. This method utilises a phenyl stationary phase, whereas previous methods have relied on C-18. Samples may be analysed directly without treatment other than dilution. Peak areas from the extracted deprotonated molecular ion mass signals for individual limonoid glucosides were normalised against the sum of the areas to establish their relative concentrations. The method was successfully applied to the analysis of various juice, extracts, and liquid samples of partially purified limonoid glucosides.     

Biasing public opinion: Computerized continuous response measurement displays impact viewers’ perceptions of media messages

Computerized displays of continuously acquired audience response measures have become an increasingly common component in television, particularly in political campaign media coverage. However, the effect of such presentations on consumer’s perceptions of both the presenters and their messages remain unclear. To address this concern, simulated computerized continuous response measurement (CRM) graphics were overlaid onto apolitical video content to produce three (negative, neutral, positive) experimental manipulations. The findings revealed considerable symmetry between the valence of the CRM graphics and research participant responses. Evaluations of the presenter and message were significantly more negative following negative CRM graphic manipulation exposure (compared against the neutral and positive conditions) suggesting that CRM graphics can be a powerful device for influencing viewers’ judgments.     

Impact of Storm-Water Runoff on Clogging and Fecal Bacteria Reduction in Sand Columns

Storm-water runoff has been identified as a major cause of coastal water quality degradation. Storm-water outfalls, common in many coastal towns, convey bacteria and other pollutants into the ocean and estuaries. In an effort to minimize this impact, the Town of Kure Beach, North Carolina, installed Dune Infiltration Systems (DIS) at two storm-water outfalls to receive storm-water runoff and allow infiltration beneath the beach dunes. A laboratory column experiment was performed to supplement this installation and determine the potential hydraulic and bacterial removal efficiency of the sand comprising the Kure Beach dunes. Columns constructed using sand collected at different depths of the dune were used to analyze the affect of bacteria application on infiltration and to examine the changes in bacteria removal that occur as infiltration rates are affected by bacteria-laden water application. Sand columns were loaded over a 60-day period with either bacteria-free storm water or storm water spiked with Escherichia coli. The seepage rate for the bacteria-spiked storm-water treatment was significantly lower (p<0.05) than the seepage rate of the bacteria-free treatment, particularly toward the end of the study. Bacteria application likely compounds the impact of sediment clogging at the sand/storm-water interface. This study indicates the need for maintenance when implementing a DIS or similar sand filter to maintain design infiltration rates, especially if reduced infiltration rates are not planned for in the design. However, a decrease in seepage rate was correlated with a decrease in effluent bacteria concentration in the bacteria-spiked storm-water sand columns. Thus, optimization is required to provide maximum infiltration of storm-water while maintaining bacteria removal efficiency.     

The association between price of regular-grade gasoline and injury and mortality rates among occupants involved in motorcycle- and automobile-related motor vehicle collisions

Motorcyclists have been reported to be more likely to die in a motor vehicle collision (MVC) than automobile occupants. With the recent increase in the pump price of gasoline, it has been reported that people are switching to motorcycles as main modes of transportation. This study evaluated the association between motor vehicle collision-related injury and mortality rates and increases in gasoline prices for occupants of automobiles and riders of motorcycles.There were an estimated 1,270,512 motorcycle MVC and 238,390,853 automobile MVC involved occupants in the U.S. from 1992 to 2007. Higher gasoline prices were associated with increased motorcycle-related injuries and deaths; however, this association no longer remained after accounting for changes in the number of registered vehicles.The current study observed that, while the number of injuries and fatalities in motorcycle-related MVCs increase with increasing gasoline price, rates remained largely unchanged. This suggests that the observed increase in motorcycle-related injuries and fatalities with increasing gasoline price is more a factor of the number of motorcycles on the road rather than operator characteristics.     

Validation of medium-pressure UV disinfection reactors by Lagrangian actinometry using dyed microspheres

Lagrangian actinometry (LA) has been demonstrated to represent an alternative to conventional biodosimetry for validation of ultraviolet (UV) disinfection systems used in drinking water treatment. However, previous applications of LA for this purpose have all involved monochromatic (λ = 254 nm) UV reactor systems. To address this issue, dyed microspheres (DMS) were applied for quantification of dose distribution delivery by field-scale UV reactor systems based on medium-pressure Hg lamp (MP) technology. These MP reactor systems are characterized by polychromatic output. Dose distribution estimates developed by LA for these reactors were reported as equivalent 254 nm distributions. When combined with the UV₂₅₄ dose-response behavior for challenge organisms used in simultaneous or parallel biodosimetry experiments, the dose distribution estimates developed from the microspheres yielded estimates of challenge organism inactivation that were in agreement with measured values. For one of the reactors tested, biodosimetry tests were conducted with two challenge organisms that had different UV dose-response behavior; UV dose distribution estimates from LA yielded predictions of microbial inactivation that were in agreement with measured inactivation responses for both challenge organisms for all test conditions. It is likely that the agreement between LA results and biodosimetry data was related, in part, to the agreement between the action spectra of the microspheres and the challenge organisms. Because LA yields a measure of the UV dose distribution delivered by a reactor, the information from LA assays will eliminate many sources of uncertainty in the design and operation of UV systems, thereby allowing for implementation of UV reactor systems that are less expensive than their predecessors, yet more reliable.     

Store manager performance and satisfaction: Effects on store employee performance and satisfaction, store customer satisfaction, and store customer spending growth.

Based on emotional contagion theory and the value–profit chain literatures, the present study posits a number of hypotheses that show how managers in the small store, small number of employees retail context may affect store employees, customers, and potentially store performance. With data from 306 store managers, 1,615 store customer-contact employees, and 57,656 customers of a single retail chain, the authors examined relationships among store manager job satisfaction and job performance, store customer-contact employee job satisfaction and job performance, customer satisfaction with the retailer, and a customer-spending-based store performance metric (customer spending growth over a 2-year period). Via path analysis, several hypothesized direct and interaction relations among these constructs are supported. The results suggest implications for academic researchers and retail managers. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Abandoned Mine Drainage in the Swatara Creek Basin, Southern Anthracite Coalfield, Pennsylvania, USA: 1. Stream Water Quality Trends Coinciding with the Return of Fish

Acidic mine drainage (AMD) from legacy anthracite mines has contaminated Swatara Creek in eastern Pennsylvania. Intermittently collected base-flow data for 1959–1986 indicate that fish were absent immediately downstream from the mined area where pH ranged from 3.5 to 7.2 and concentrations of sulfate, dissolved iron, and dissolved aluminum were as high as 250, 2.0, and 4.7 mg/L, respectively. However, in the 1990s, fish returned to upper Swatara Creek, coinciding with the implementation of AMD treatment (limestone drains, limestone diversion wells, limestone sand, constructed wetlands) in the watershed. During 1996–2006, as many as 25 species of fish were identified in the reach downstream from the mined area, with base-flow pH from 5.8 to 7.6 and concentrations of sulfate, dissolved iron, and dissolved aluminum as high as 120, 1.2, and 0.43 mg/L, respectively. Several of the fish taxa are intolerant of pollution and low pH, such as river chub (Nocomis micropogon) and longnose dace (Rhinichthys cataractae). Cold-water species such as brook trout (Salvelinus fontinalis) and warm-water species such as rock bass (Ambloplites rupestris) varied in predominance depending on stream flow and stream temperature. Storm flow data for 1996–2007 indicated pH, alkalinity, and sulfate concentrations decreased as the stream flow and associated storm-runoff component increased, whereas iron and other metal concentrations were poorly correlated with stream flow because of hysteresis effects (greater metal concentrations during rising stage than falling stage). Prior to 1999, pH < 5.0 was recorded during several storm events; however, since the implementation of AMD treatments, pH has been maintained near neutral. Flow-adjusted trends for 1997–2006 indicated significant increases in calcium; decreases in hydrogen ion, dissolved aluminum, dissolved and total manganese, and total iron; and no change in sulfate or dissolved iron in Swatara Creek immediately downstream from the mined area. The increased pH and calcium from limestone in treatment systems can be important for mitigating toxic effects of dissolved metals. Thus, treatment of AMD during the 1990s improved pH buffering, reduced metals transport, and helped to decrease metals toxicity to fish.