Novel diffusion cell for in vitro transdermal permeation, compatible with automated dynamic sampling

The development of a new diffusion cell for in vitro transdermal permeation is described. The so-called Kelder cells were used in combination with the ASPEC system (Automatic Sample Preparation with Extraction Columns), which is designed for the automation of solid-extractions (SPE). Instead of SPE columns, 20 Kelder cells were placed in the racks. This allowed automatic sampling of up to 20 cells for 24 h in a dynamic mode. The cells consist of an inlet compartment, a donor compartment and a receptor compartment. The size and the depth of the inlet compartment were important to avoid entrapment of air bubbles in the receptor compartment. The Kelder cells mimic blood flow beneath the skin by replacement of the permeating drug every 2 min. Hence sink condition are more easily maintained than with the static Franz diffusion cell. The performance of the cells was tested with permeation experiments using atropine as a model drug permeating through an artificial membrane (Silastic). The use of this skin model minimized the variability in permeation of atropine as compared with human skin.     

Allotype-associated differences in concentrations of human IgA2

A prospective clinical trial comparing adverse postmyelographic effects and myelographic quality of metrizamide and iohexol was conducted. Using a predetermined, randomized assignment, 24 horses exhibiting neurologic signs were administered either metrizamide (180 mgl/ml) or iohexol (180 mgl/ml) via cerebellomedullary puncture. Each horse was evaluated postmyelographically for adverse effects. Myelographic quality was assessed by a numerical scoring method. Adverse effects were observed more frequently with metrizamide (21) compared with iohexol (6) myelography (p < 0.05). Seizures, intensification of preexisting neurologic signs and prolonged anesthetic recovery were the most common complications after myelography. There was no difference in myelographic quality (p > 0.05). We conclude that iohexol is safer than metrizamide for equine myelography and that quality myelograms can be obtained with either contrast medium.     

Cellular mechanisms of intestine regeneration in the sea cucumber, Holothuria glaberrima Selenka (Holothuroidea:Echinodermata)

Echinoderms are the deuterostome group with the most striking capacity to regenerate lost body parts. In particular, members of the class Holothuroidea are able to regenerate most of their internal organs following a typical evisceration process. Such formation of new viscera in an adult organism provides a unique model to study the process of organogenesis. We have studied this process in the sea cucumber Holothuria glabberrima by describing the spatial and temporal pattern of cellular events that occur during intestine regeneration following chemically induced evisceration. Regeneration begins as a thickening of the mesenteries that supported the autotomized organs to the body wall. The mesenterial thickening consists of tissues where most of the cellular populations found in the normal intestine are already present. However, the cell numbers differ, particularly those of hemocytes and amoebocytes, suggesting that some of these cells play an important role in the formation of the solid rod of hypertrophic mesentery that characterizes the intestinal primordia. The appearance of the luminal epithelium, together with the formation of the lumen, occurs during the second week of regeneration by proliferation and extensive migration of cells from the esophagus and cloacal ends into the thickenings. At this stage all tissue layers are present, but it takes an additional week for them to exhibit the proportions typical of the normal organ. Cell division, as determined by BrdU labeling, mainly occurs in the coelomic epithelia of the hypertrophic mesentery and in the regenerating luminal epithelium. Our study provides evidence that the process of new organ formation in holothurians can be described as an intermediate process showing characteristics of both epimorphic and morphallactic phenomena.     

Calcium-sensitive fluorescent dyes can report increases in intracellular free zinc concentration in cultured forebrain neurons

High concentrations of Zn2+ are found in presynaptic terminals of excitatory neurons in the CNS. Zn2+ can be released during synaptic activity and modulate postsynaptic receptors, but little is known about the possibility that Zn2+ may enter postsynaptic cells and produce dynamic changes in the intracellular Zn2+ concentration ([Zn2+]i). We used fura-2 and magfura-2 to detect the consequences of Zn2+ influx in cultured neurons under conditions that restrict changes in intracellular Ca2+ and Mg2+ concentrations. The resulting ratio changes for both dyes were reversed completely by the Zn2+ chelator, N,N,N',N'-tetrakis(2-pyridylmethyl)ethylenediamine, indicating that these dyes are measuring changes in [Zn2+]i. We found that fura-2 was useful in measuring small increases in [Zn2+]i associated with exposure to Zn2+ alone that may be mediated by a Na+/Ca2+ exchanger. Magfura-2, which has a lower affinity for Zn2+, was more useful in measuring larger agonist-stimulated increases in [Zn2+]i. The coapplication of 300 microM Zn2+ and 100 microM glutamate/10 microM glycine resulted in a [Zn2+]i increase that was approximately 40-100 nM in magnitude and could be inhibited by the NMDA receptor antagonist, MK-801 (30 microM), or extracellular Na+. This suggests that Zn2+ influx can occur through at least two different pathways, leading to varying increases in [Zn2+]i. These findings demonstrate the feasibility of measuring changes in [Zn2+]i in neurons.     

NMDA receptors mediate peripheral chemoreceptor afferent input in the conscious rat

N-methyl-D-aspartate (NMDA) glutamate receptors mediate critical components of cardiorespiratory control in anesthetized animals. The role of NMDA receptors in the ventilatory responses to peripheral and central chemoreceptor stimulation was investigated in conscious, freely behaving rats. Minute ventilation (VE) responses to 10% O2, 5% CO2, and increasing intravenous doses of sodium cyanide were measured in intact rats before and after intravenous administration of the NMDA receptor antagonist MK-801 (3 mg/kg). After MK-801, eupcapnic tidal volume (VT) decreased while frequency increased, resulting in a modest reduction in VE. Inspiratory time (TI) decreased, whereas expiratory time remained unchanged. The VE responses to hypercapnia were qualitatively similar in control and MK-801 conditions, with slight reductions in respiratory drive (VT/TI) after MK-801. In contrast, responses to hypoxia were markedly attenuated after MK-801 and were primarily due to reduced frequency changes, whereas VT was unaffected. Sodium cyanide doses associated with significant VE increases were 5 and 50 microg/kg before and after MK-801, respectively. Thus 1-log shift to the right of individual dose-response curves occurred with MK-801. Selective carotid body denervation reduced VE during hypoxia by 70%, and residual hypoxic ventilatory responses were abolished after MK-801. These findings suggest that, in conscious rats, carotid and other peripheral chemoreceptor-mediated hypoxic ventilatory responses are critically dependent on NMDA receptor activation and that NMDA receptor mechanisms are only modestly involved during hypercapnia.     

Development of ceramic floor tile compositions based on quartzite and granite sludges

In the present work, industrial sludges derived from cutting and polishing natural stones (granite and quartzite) were characterised in terms of particles size distribution, chemical and mineralogical composition, and thermal behaviour and their potential to be incorporated as main components in red-clay-based stoneware tiles was evaluated. High levels (60–70 wt.%) of incorporation were attempted aiming at designing new formulations intended to be less expensive and possess better final properties (lower water absorption and higher flexural strength) in comparison to an industrial reference body used in the production of rustic tiles by extrusion, characterised 8–9% water absorption and a flexural strength of 17–18 MPa. Extruded rods of different formulations were produced and fired at 1100 °C, 1125 °C, 1150 °C and 1200 °C. The experimental results showed that all the new formulations performed better with the most significant improvements being obtained with incorporation of granite sludge. Flexural strength values more than triplicate and water absorption decreased by more than one order of magnitude in comparison to the reference paste. The new products fulfil the requirements of the ISO 13006 standard, group BIa (porcelain tiles).     

Approximate similarity search for online multimedia services on distributed CPU–GPU platforms

Similarity search in high-dimensional spaces is a pivotal operation for several database applications, including online content-based multimedia services. With the increasing popularity of multimedia applications, these services are facing new challenges regarding (1) the very large and growing volumes of data to be indexed/searched and (2) the necessity of reducing the response times as observed by end-users. In addition, the nature of the interactions between users and online services creates fluctuating query request rates throughout execution, which requires a similarity search engine to adapt to better use the computation platform and minimize response times. In this work, we address these challenges with Hypercurves, a flexible framework for answering approximate k-nearest neighbor (kNN) queries for very large multimedia databases. Hypercurves executes in hybrid CPU–GPU environments and is able to attain massive query-processing rates through the cooperative use of these devices. Hypercurves also changes its CPU–GPU task partitioning dynamically according to the observed load, aiming for optimal response times. In our empirical evaluation, dynamic task partitioning reduced query response times by approximately 50 % compared to the best static task partition. Due to a probabilistic proof of equivalence to the sequential kNN algorithm, the CPU–GPU execution of Hypercurves in distributed (multi-node) environments can be aggressively optimized, attaining superlinear scalability while still guaranteeing, with high probability, results at least as good as those from the sequential algorithm.     

Selectivity of Supercritical CO<Subscript>2 </Subscript>in the Fractionation of Hake Liver Oil Ethyl Esters

The solubility of different ethyl esters derivatized from hake liver oil in supercritical carbon dioxide was studied. A selectivity factor was used to determine optimal conditions to fractionate the ethyl ester mixture. A strong influence of solvent pressure and temperature was observed within 8.63–18.04 MPa and 40–70 °C. The lowest total solubility of the ethyl ester mixture was obtained when using supercritical carbon dioxide at the lowest density (the lowest pressure and the highest temperatures value tested). The highest discrimination against long-chain polyunsaturated fatty acids (e.g. EPA and DHA) was also obtained at these above conditions. Conversely, higher solubility and lower selectivity were obtained when solvent density increased. Considering this inverse correlation between selectivity and solubility, a single-step batch-fractionation process was designed to increase the 22:6 ethyl ester content from an initial value of 17.5% in the starting material to 55% in the final extract.     

Rheology studies of polyethylene/chemical blowing agent solutions within an injection molding machine

An in‐line capillary rheometer nozzle equipped to a conventional reciprocating 55‐ton injection molding machine was used to study the viscosity of single phase low density polyethylene (LDPE)/chemical blowing agent (CBA) solutions under high shear rate in the concentration range of 0 to 5 wt%. The steady shear viscosity of LDPE with endothermic and exothermic chemical blowing agents was measured for shear rates ranging from 170 to 200,000 s^?1 and under pressure conditions up to 36 MPa. Pressure‐volume‐temperature (pvT) measurements were determined to account for the pressure effects and the changes of the free volume during processing. The viscosity reduction of the polymer‐CBA solution was found to be dependent on the concentration of the chemical blowing agent and melt pressure. A model based on a simplified Cross‐Carreau model, incorporating the pvT behavior of LDPE, and the free volume concept was proposed to estimate the viscosity reduction resulting from the addition of a chemical blowing agent. The model employs a scaling method based on concentration‐dependent and pressure‐dependent shift factors to collapse the viscosity measurement to a master curve at each temperature. POLYM. ENG. SCI., 45:1108–1118, 2005. © 2005 Society of Plastics Engineers     

Influence of maize kernel hardness on flour hydration and cooking properties

Knowledge of the association between cooking properties and endosperm hardness may help nutritionist and processors to select raw materials for preparing maize based food products, particularly those eaten as cooked dispersions. Seven commercial maize cultivars differing in hardness were selected to evaluate endosperm hardness on the kernels and some characteristics such as composition and hydration and cooking properties on the grits obtained from those maizes. Results show that the differences in endosperm hardness (directly related to grits protein content) can explain the differences in swelling and amylographic consistencies values. Cultivars with the hardest endosperm show the lowest values at high temperature. They also show the lowest amylographic consistencies. On the other hand softer endosperms present the highest swelling power and the highest amylographic consistencies. These differences are attributed to the restriction for starch swelling caused by the protein matrix. Endosperm hardness measurements and swelling power at 95 degrees C, can be useful to select cultivars that are going to be used to prepare maize based foods like atoles, polenta, etc.