On the reassessment of thermal neutron doses in TLD-100 by measuring the residual dose

By employing second readouts and the Phototransferred thermoluminescence (PTTL) method, high doses may be reassessed on the basis of residual dose information. It was shown in the past that for TLD-100, gamma doses can be reassessed by using a simple and efficient method, which consists of expanding the heating time to 30 s. In the present study, the 'extended time' method and the PTTL residual dose evaluations are used for reassessing thermal neutron doses when using TLD-100 crystals. Reassessment characteristics are presented for relatively low thermal neutron doses, in the range between approximately 1 and 18 mSv gamma dose equivalent.     

Life events, relationship quality, and depression: An investigation of judgment discontinuity in vivo.

Relationships among stressful life events, negative affect, and judged quality of intimate relationships were explored. Three studies and a mini-meta-analysis revealed that as negative life events increased, judgments of close relationships gradually became less favorable, jumped back toward positivity, and then, again, gradually became less favorable. The same methods of analysis revealed a relationship between negative life events and negative affect with no evidence of significant discontinuities. Moreover, the correlation between relationship satisfaction and negative affect (with negative events held constant), was maximized at the point of relationship-judgment discontinuity. Although the findings are complex, they are consistent with the authors' theoretical account and represent an initial attempt to conceptualize the effect of negative life events in light of the recent social judgment literature. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effect of specific dietary fatty acids on lipogenesis in the livers and mammary glands of lactating mice

The effects of linoleic, linolenic and columbinic acids fed as 4% of a high carbohydrate (50% glucose) diet on the activities and the amounts of several enzymes associated with fatty acid synthesis in livers and mammary glands of lactating mice were compared with those for stearic and oleic acids. Fatty acid synthesis, measured in vivo, was significantly lower in livers of mice ingesting all 3 polyunsaturated fatty acids (PUFA), whereas in mammary glands synthesis was lower only in mice receiving columbinic acid. The activities of fatty acid synthetase (FAS) and acetyl CoA carboxylase were significantly reduced in liver by all 3 PUFA, as were activities of glucose-6-phosphate dehydrogenase, malic enzyme (ME) and citrate cleavage enzyme (CCE), also associated with lipogenesis. In mammary gland, on the other hand, the activities of these enzymes were unaffected by dietary PUFA. The tissue contents of FAS, ME and CCE, measured by rocket immunoelectrophoresis, were found to be significantly reduced in liver by linoleate, linolenate and columbinate but were not significantly altered in mammary gland. The decrease in hepatic lipogenesis observed was principally due to a decrease in the amounts of these enzymes induced by the dietary PUFA but the inhibition in mammary gland caused by columbinate could not be accounted for by a reduction in enzyme contents and therefore may be due to allosteric effects which occur when fatty acid synthesis is measured with³H₂O. The fatty acid composition in liver and mammary gland of dams and in liver and kidney of pups completely reflected dietary fatty acids. Columbinate made up ca. 20% of the total fatty acids in both tissues of the columbinic acid-fed mice and ca. 15% in the pup tissues. This suggests that columbinate is incorporated into milk lipids of dams and is easily absorbed by pups. The elevated ratios of 16/16∶1 and 18/18∶1 in liver and mammary gland of dams and liver and kidney of the pups from dams fed linoleate, linolenate and columbinate suggest that each of these polyunsaturated fatty acids in the diet can inhibit the activity of Δ9 desaturase.     

Graft polymerization of propylene sulfide on crosslinked polystyrene

Sulfur containing graft polymers that may be of interest as polymeric transfer agents were synthesized. Graft polymerization of propylene sulfide on crosslinked polystyrene beads was investigated; both crosslinked polystyrene and its chloromethylated derivative were grafted. Crosslinked polystyrene was metallated by BuLi–TMEDA and was used to initiate anionic graft polymerization of propylene sulfide. Graft polymers of high polypropylene sulfide content corresponding to 10 mmol s/g were obtained. The grafted polypropylene sulfide was evenly distributed across the bead cross section. No change in bead surface characteristics was observed. Grafting on chloromethylated polystyrene beads was achieved by reaction between the chloromethylene groups with sulfide groups of performed polypropylene sulfide, and with terminal sodium thiolate groups of living polypropylene sulfide.     

The feasibility of boron removal from water by capacitive deionization

We report on the possibility of removing boron (in the form of boric acid) from water by electrochemical means. We explore capacitive de-ionization (CDI) processes in which local changes in pH near the surface of high-surface-area activated carbon fiber (ACF) electrodes during charging are utilized, in order to dissociate boric acid into borate ions which can be electro-adsorbed onto the positive electrode in the CDI cells. For this purpose, a special flow-through CDI cell was constructed in which the feed solution flows through the electrodes. Local pH changes near the carbon electrode surface were investigated using a MgCl₂ solution probe in three- (with reference) and two-electrode cells, and described qualitatively. We show that, to a certain extent, boron can indeed be removed from water by CDI.     

Fast and efficient synthesis of high molecular weight poly(epsilon‐caprolactone) diols by microwave‐assisted polymer synthesis

Because of advantageous features such as shorter reaction times, greater yields, limited generation of by‐products and relatively easy and straightforward scale‐up, microwave‐assisted synthesis has become a very appealing tool in organic synthesis. Conversely, its implementation in the context of the synthesis of biomaterials for biopharmaceutical applications has been more limited. The present work reports on the fast and efficient microwave‐assisted synthesis of poly(ethylene glycol) (PEG)‐initiated poly(ε‐caprolactone) diols (PCL) by the ring‐opening polymerization (ROP) of ε‐caprolactone using stannous octanoate as catalyst. Since the PEG content in the synthesized copolymers was extremely low (0.2–1.9%), products were highly hydrophobic and displayed the intrinsic thermal properties of pure PCL. As opposed to the more time‐consuming conventional thermally‐driven synthesis that usually demands 2–3 h, the microwave technique resulted in intermediate to high molecular weight PEG‐PCL derivatives within 10–15 min. The influence of different parameters affecting the synthetic process, namely monomer‐to‐initiator ratio, reaction time, catalyst concentration and the presence, type, and concentration of solvent were thoroughly investigated. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Yttrium barium copper oxide‐filled polystyrene as a dielectric material

Electrical impedance measurements are carried out on high temperature superconducting ceramic Yttrium Barium Copper Oxide (YBCO)–Polystyrene (PS) composite materials, in which superconducting particles are embedded in polystyrene matrix. The results of impedance versus frequency (100 Hz–13 MHz), phase angle versus temperature for volume percentage of superconductor (0–40%) are presented. No marked transition in phase angle is observed when the material goes through the superconducting transition temperature of the filler. The dielectric constant and losses increase with increasing YBCO content. However the increase in losses is modest and the excellent dielectric properties of the composites are not adversely affected. The system conforms to Clausius‐Mossotti equation. Dipole moment of YBCO particles and polarizability of the composites are calculated using the Clausius‐Mossotti approaches. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011