Assessing biological control of Acarus siro by Cheyletus malaccensis under laboratory conditions: Effect of temperatures and prey density

In stored grain, the predatory mite Cheyletus spp. may be used to control the pest mite Acarus siro. The efficiency of control depends on many factors, particularly ambient temperature. In this study we investigated the effects of temperature and initial prey density on the prey–predator system under laboratory conditions. Ratio–response models were fitted to estimate the efficiency of control for three temperatures. At 15 °C a 90% reduction of A. siro was achieved by releasing nine Cheyletus malaccensis individuals into a population of 100 A. siro individuals in 1 kg of grain. At 20 °C, 90% reduction required seven C. malaccensis individuals and at 25 °C, it required three C. malaccensis individuals. Without the predator the intrinsic rates of increase of A. siro populations increased with temperature and were highest for an initial density of 100 individuals, revealing some form of positive interaction among A. siro individuals during food processing. The intrinsic rates of increase of C. malaccensis populations also increased with temperature and decreased with increasing density of the predator, presumably as a result of interference competition among predators.At 15 °C the rate of increase for A. siro was higher than that for C. malaccensis, while at higher temperatures it was the other way around. Lower developmental thresholds were 10 °C for A. siro and 13.6 °C for C. malaccensis. In order to find when an artificial release of C. malaccensis is most efficient we simulated a population increase of A. siro using temperature records from one grain store. In Central Europe this type of biological control can be efficient only when the predator is released at the beginning of storage, i.e. in September and October.     

The TASSO vertex detector

The design, construction and performance of a small pressurized drift chamber of low mass and high wire density is described. The chamber forms part of the TASSO experiment at the PETRA e⁺e⁻ storage ring of the DESY Laboratory. First physics results obtained with the chamber are also briefly discussed.     

Underrated transformations in the open space—The case of an urbanized and multifunctional area

The open space in Flanders is subjected to different transformation processes. These processes are related to dynamic interactions within an urbanizing society and to competition for space by an increasing number of functions. Despite the acknowledgement of dynamic land use demands, the current categorizations of land use and land cover are not always able to catch transformations related to e.g. newcomers in land use, ecosystem services and multifunctionality in mixed urban–rural areas. Remote sensing tools and census data are insufficient when studying a complex and intensively used space. This research therefore aims to identify underrated transformations in the study area Flanders (the northern part of Belgium) using two main sources: (i) open expert interviews and (ii) three case studies. The interviews serve to formulate a renewed framework that can be used to describe transformations in the open space. The transformation processes that emerge from the interviews and case studies are compared to those defined and recognized in the current spatial planning policy and in existing monitoring data, in order to identify bottlenecks and options for future spatial planning policy. The major conclusions of this paper are (i) a critical view on the analysis and categorization of functions and open space as it is currently practiced in land use monitoring and land use planning programs, (ii) additional data needs to encompass transformation processes in the open space and (iii) the need for a more integral vision for open space.     

The flavour of cape gooseberry (Physalis peruviana L.)

European Food Research and Technology - The volatile constituents of cape gooseberry (Physalis peruviana L.) were characterized using liquid/liquid extraction and fractionation of the flavour...     

Measuring the impregnation of an out-of-autoclave prepreg by micro-CT

Resin flow into dry reinforcement regions is the main microstructural change during the processing of out-of-autoclave prepregs and influences air evacuation and void suppression. Such impregnation flow was investigated experimentally during the processing of a second-generation out-of-autoclave prepreg. First, laminates were partially processed to different stages of a simple cure cycle. Then, samples from each laminate were scanned using X-ray microtomography (micro-CT) to obtain 3D microstructural data. This data was used to investigate the initial microstructure of the material and measure the extent of impregnation at each processing stage, the rate of impregnation, and the evolution of macro-porosity within the material.     

Drittes Wissenschaftshistorikertreffen in Brdo

Ohne Zusammenfassung     

BN0.5O0.4C0.1: Carbon- and oxygen-substituted hexagonal BN

Hexagonal boron nitride (hex BN) containing significant amounts of C and O substituting for N (hex BCNO) was synthesized at 75 kbar and 1700°C from mixtures of C, B₂O₃, and amorphous B contained in a hex BN crucible. Hex BCNO is a minor constituent of the product and occurs as small, <30 nm diameter, rounded pseudohexagonal particles adhering to materials with the α-rhombohedral B structure. Electron energy-loss spectroscopy with a transmission electron microscope was used to quantify their elemental ratios. Up to 50% of the N in hex BN is replaced by C and O, e.g., BN_0.49O_0.38C_0.11. The electron energy-loss near-edge fine structure of the core-loss edges was used to elucidate the possible structures of hex BCNO. The core-loss edges of B, C, N, and O exhibit orientation-dependent intensity changes, which indicates that they occupy similar anisotropic bonding sites in graphite-like BCNO layers. For a composition of BN_0.5O_0.4C_0.1, regions with B–N₃, B–N₂O, and B–NO₂ units predominate. In addition, some grains have significant quantities of B–O₃ and B–C₃ units. Boron–boron bonding is either absent or infrequent.     

Modelling the effect of material properties and process parameters on tow impregnation in out-of-autoclave prepregs

Out-of-autoclave prepregs based on woven fabrics initially consist of dry tows and resin-rich areas. The tows allow air evacuation in the initial stages of processing and are subsequently infiltrated by surrounding matrix. The following study analyzes the relationship between material properties, process parameters and tow impregnation for three OOA prepregs. First, a representative model for tow impregnation is developed. Then, the model parameters are determined and the model predictions are correlated to impregnation data measured by X-ray microtomography. Finally, the model is used in a parametric study to investigate the effect of fibre architecture, cure cycle temperature and resin initial degree of cure on tow impregnation rate and to predict the possible occurrence of flow-induced micro-voids.     

Active-amplifier-array diagnostics using high-resolutionelectrooptic field mapping

Several Ka-band spatial-amplifier power combiners and their free-space feeds were characterized using a high-resolution extreme-near-field electrooptic measurement technique. The two-dimensional electric-field amplitude and phase maps obtained from several arrays are presented. The usefulness of the technique for diagnostic purposes during the design and prototyping stages of the active arrays is discussed. In particular, the electrooptic maps were shown to be valuable for making improvements in the bias line design in one case, and for isolating faulty unit cells in another case