Assessment of different techniques for quantification of α-Al(FeMn)Si and β-AlFeSi intermetallics in AA 6xxx alloys

During homogenisation of AA 6xxx aluminium alloys, the platelike β-AlFeSi intermetallic phase will transform to a less Si-rich and more spheroidised α-Al(FeMn)Si phase which is more favourable for extrusion. In this study, several quantitative methods, which determine the relative volume fraction of α-Al(FeMn)Si and β-AlFeSi, are compared and an assessment of each method is made. The methods used are optical microscopy, scanning electron microscopy (SEM) in combination with electron dispersive X-ray (EDX) using polished samples, and X-ray diffraction (XRD) on intermetallics, extracted through selective dissolution of the Al matrix. The highest accuracy is obtained by using SEM/EDX analysis and applying two criteria.     

A RKHS interpolator-based graph matching algorithm

We present an algorithm for performing attributed graph matching. This algorithm is derived from a generalized framework for describing functionally expanded interpolators which is based on the theory of reproducing kernel Hilbert spaces (RKHS). The algorithm incorporates a general approach to a wide class of graph matching problems based on attributed graphs, allowing the structure of the graphs to be based on multiple sets of attributes. No assumption is made about the adjacency structure of the graphs to be matched     

Biosynthesis and assembly of alcohol oxidase, a peroxisomal matrix protein in methylotrophic yeasts: a review

Alcohol oxidase (AO) catalyses the first step of methanol metabolism in yeasts. In vivo the enzyme is compartmentalized in special cell compartments, called peroxisomes. The enzyme along with the organelles are induced during growth of methylotrophic yeasts on methanol as the sole carbon source. Like all other peroxisomal matrix proteins, AO is encoded by a nuclear gene. Expression of the protein is regulated by a repression/derepression mechanism, but also by induction. Inactive monomeric precursor protein is synthesized in the cytosol and subsequently imported post-translationally into peroxisomes without further processing. Assembly into the active homo-octameric enzyme and binding of the prosthetic group flavin adenine dinucleotide occurs inside the organelle. When enhanced concentration of octameric alcohol oxidase are present in the organelles, the enzyme may form a crystalloid. Oligomerization is not dependent on translocation of AO precursors into their target organelle since octameric, active AO is detected in the cytosol and nucleus of peroxisome-deficient mutants of Hansenula polymorpha: at high expression rates large cytosolic AO crystalloids are formed, which occasionally are also encountered inside the nucleus of such mutants. This paper summarizes recent findings and views on the mechanisms involved in synthesis, import, assembly and crystallization of this important peroxisomal enzyme.     

Multistage Zeolite Drying for Energy-Efficient Drying

This work discusses the potential of three multistage zeolite drying systems (counter-, co-, and cross-current) with a varying number of stages. The evaluation showed that for 2-4 stages with heat recovery the efficiency of the systems ranges between 80 and 90%. Additionally, by introducing a compressor, the latent heat in the exhaust air from the regenerator is recovered and used to heat the inlet air for an additional drying stage. As a result, for the counter-current drying system and compressor pressure 1.5-2 bar, a maximum energy efficiency of 120% is achieved, which results in halving the energy consumption compared to conventional drying systems.     

Brake wear from vehicles as an important source of diffuse copper pollution.

In this article we show that brake wear from road traffic vehicles is an important source of atmospheric (particulate) copper concentrations in Europe. Consequently, brake wear also contributes significantly to deposition fluxes of copper to surface waters. We estimated the copper emission due to brake wear to be 2.4 kiloton per year. For comparison, the official database for Europe (without brake wear) totals 2.6 kiloton per year. In Western Europe the brake wear emissions dominate the total emission of copper. Using the spatially resolved emission data, copper distributions over Europe were calculated with the LOTOS-EUROS model. Without brake wear the model underestimates observed copper concentrations by a factor of 3, which is in accordance with other studies. Including the brake wear emissions largely removes the bias. We find that 75% of the atmospheric copper input in the North Sea may be due to brake wear. We estimate that about 25% of the total copper input in the Dutch part of the North Sea stems from brake wear. Although the estimated brake wear copper emission is associated with a large uncertainty, it significantly improves our understanding of the copper cycle in the environment.     

Use of modelling for optimization and upgrade of a tropical wastewater treatment plant in a developing country.

This paper presents results of a novel application of coupling the Activated Sludge Model No. 3 (ASM3) and the Anaerobic Digestion Model No.1 (ADM1) to assess a tropical wastewater treatment plant in a developing country (Surat, India). In general, the coupled model was very capable of predicting current plant operation. The model proved to be a useful tool in investigating various scenarios for optimising treatment performance under present conditions and examination of upgrade options to meet stricter and upcoming effluent discharge criteria regarding N removal. It appears that use of plant-wide modelling of wastewater treatment plants is a promising approach towards addressing often complex interactions within the plant itself. It can also create an enabling environment for the implementations of the novel side processes for treatment of nutrient-rich, side-streams (reject water) from sludge treatment.     

A Radiation Imaging Detector Made by Postprocessing a Standard CMOS Chip

An unpackaged microchip is used as the sensing element in a miniaturized gaseous proportional chamber. This letter reports on the fabrication and performance of a complete radiation imaging detector based on this principle. Our fabrication schemes are based on wafer-scale and chip-scale postprocessing. Compared to hybrid-assembled gaseous detectors, our microsystem shows superior alignment precision and energy resolution, and offers the capability to unambiguously reconstruct 3D radiation tracks on the spot.     

Photonic Demodulator With Sensitivity Control

A current assisted photonic demodulator for use as a pixel in a 3-D time-of-flight imager shows nearly 100% static demodulator contrast and is operable beyond 30 MHz. An integrated tunable sensitivity control is also presented for increasing the distance measurement range and avoiding unwanted saturation during integration periods. This is achieved by application of a voltage on a dedicated drain tap showing a quenching of sensor sensitivity to below 1%