Design and Implementation of a Ubiquitous Robotic Space

This paper describes a concerted effort to design and implement a robotic service framework. The proposed framework is comprised of three conceptual spaces: physical, semantic, and virtual spaces, collectively referred to as a ubiquitous robotic space. We implemented a prototype robotic security application in an office environment, which confirmed that the proposed framework is an efficient tool for developing a robotic service employing IT infrastructure, particularly for integrating heterogeneous technologies and robotic platforms.     

Necessary and sufficient stability condition of fractional-order interval linear systems

This paper establishes a necessary and sufficient stability condition of fractional-order interval linear systems. It is supposed that the system matrix A is an interval uncertain matrix and fractional commensurate order belongs to 1≤α<2. Using the existence condition of Hermitian P=P^∗ for a complex Lyapunov inequality, we prove that the fractional-order interval linear system is robust stable if and only if there exists Hermitian matrix P=P^∗ such that a certain type of complex Lyapunov inequality is satisfied for all vertex matrices. The results are directly extended to the robust stability condition of fractional-order interval polynomial systems.     

Effects of morphologies of (Cd+Te) powders on the properties of sintered CdS/CdTe solar cells

Polycrystalline CdS/CdTe solar cells have been prepared by coating and sintering a CdS slurry and a (Cd+Te) slurry. CdS layers were first formed on borosilicate glass substrates at 600°C in nitrogen and then CdTe layers were formed on the sintered CdS layers at 625°C in nitrogen. The (Cd+Te) slurry contained (Cd+Te) powders mixed in a ball mill for 12–220 h instead of more expensive CdTe powders. The shape of cadmium particles changed from spherical to plate-like and the diameter of the plate-shaped particles became smaller as the ball-milling time increased. In addition, a compound CdTe started to form during a long milling time. The sintered CdTe layers were more compact as the diameter of plate-shaped cadmium particles decreased. However, cracks developed in the sintered CdTe layer when the diameter was small ( 2 m). The efficiency of sintered CdS/CdTe solar cells increased with decreasing particle diameter and then decreased with further decrease in particle diameter. The highest efficiency of 12.1% was achieved using a mixture of (Cd+Te) powders which had plate-shaped cadmium particles with a diameter of 5 m. The results suggest that high-efficiency sintered CdS/CdTe solar cells can be fabricated by using CdTe slurry from the mixture of (Cd+Te) powders with an inexpensive ball-milling process.     

Latch Applicator for Efficient Delivery of Dissolving Microneedles Based on Rapid Release of Elastic Strain Energy by Thumb Force (Adv. Funct. Mater. 11/2023)

Dissolving microneedle (DMN) is an attractive alternative to parenteral and enteral drug administration owing to its painless self-administration and safety due to non-generation of medical waste. For reproducible and efficient DMN administration, various DMN application methods, such as weights, springs, and electromagnetic devices, have been studied. However, these applicators have complex structures that are complicated to use and high production costs. In this study, a latch applicator that consists of only simple plastic parts and operates via thumb force without any external complex device is developed. Protrusion-shaped latches and impact distances are designed to accumulate thumb force energy through elastic deformation and to control impact velocity. The optimized latch applicator with a pressing force of 25 N and an impact velocity of 5.9 m s⁻¹ fully inserts the drug-loaded tip of the two-layered DMN into the skin. In an ovalbumin immunization test, DMN with the latch applicator shows a significantly higher IgG antibody production rate than that of intramuscular injection. The latch applicator, which provides effective DMN insertion and a competitive price compared with conventional syringes, has great potential to improve delivery of drugs, including vaccines.     

Skin-like Omnidirectional Stretchable Platform with Negative Poisson's Ratio for Wearable Strain–Pressure Simultaneous Sensor

Conventional elastomeric polymers used as substrates for wearable platforms have large positive Poisson's ratios (≈0.5) that cause a deformation mismatch with human skin that is multidirectionally elongated under bending of joints. This causes practical problems in elastomer-based wearable devices, such as delamination and detachment, leading to poorly reliable functionality. To overcome this issue, auxetic-structured mechanical reinforcement with glass fibers is applied to the elastomeric film, resulting in a negative Poisson's ratio (NPR), which is a skin-like stretchable substrate (SLSS). Several parameters for determining the materials and geometrical dimensions of the auxetic-structured reinforcing fillers are considered to maximize the NPR. Based on numerical simulation and digital image correlation analysis, the deformation tendencies and strain distribution of the SLSS are investigated and compared with those of the pristine elastomeric substrate. Owing to the strain-localization characteristics, an independent strain-pressure sensing system is fabricated using SLSS with a Ag-based elastomeric ink and a carbon nanotube-based force-sensitive resistor. Finally, it is demonstrated that the SLSS-based sensor platform can be applied as a wearable device to monitor the physical burden on the wrist in real time.     

Enabling On-Demand Conformal Zn-Ion Batteries on Non-Developable Surfaces

Conventional power sources encounter difficulties in achieving structural unitization with complex-shaped electronic devices because of their fixed form factors. Here, it is realized that an on-demand conformal Zn-ion battery (ZIB) on non-developable surfaces uses direct ink writing (DIW)-based nonplanar 3D printing. First, ZIB component (manganese oxide-based cathode, Zn powder-based anode, and UV-curable gel composite electrolyte) inks are designed to regulate their colloidal interactions to fulfill the rheological requirements of nonplanar 3D printing, and establish bi-percolating ion/electron conduction pathways, thereby enabling geometrical synchronization with non-developable surfaces, and ensuring reliable electrochemical performance. The ZIB component inks are conformally printed on arbitrary curvilinear substrates to produce embodied ZIBs that can be seamlessly integrated with complicated 3D objects (including human ears). The conformal ZIB exhibits a high fill factor (i.e., areal coverage of cells on underlying substrates, ≈100%) that ensures high volumetric energy density (50.5 mWh cm_cell⁻³), which exceeds those of previously-reported shape-adaptable power sources.     

Effect of stents coated with a combination of sirolimus and alpha-lipoic acid in a porcine coronary restenosis model

The aim of this study was to evaluate antiproliferative sirolimus- and antioxidative alpha-lipoic acid (ALA)-eluting stents using biodegradable polymer [poly-l-lactic acid (PLA)] in a porcine coronary overstretch restenosis model. Forty coronary arteries of 20 pigs were randomized into four groups in which the coronary arteries had a bare metal stent (BMS, n = 10), ALA-eluting stent with PLA (AES, n = 10), sirolimus-eluting stent with PLA (SES, n = 10), or sirolimus- and ALA-eluting stent with PLA (SAS, n = 10). A histopathological analysis was performed 28 days after the stenting. The ALA and sirolimus released slowly over 30 days. There were no significant differences between groups in the injury or inflammation score; however, there were significant differences in the percent area of stenosis (56.2 ± 11.78 % in BMS vs. 51.5 ± 12.20 % in AES vs. 34.7 ± 7.23 % in SES vs. 28.7 ± 7.30 % in SAS, P < 0.0001) and fibrin score [1.0 (range 1.0–1.0) in BMS vs. 1.0 (range 1.0–1.0) in AES vs. 2.0 (range 2.0–2.0) in SES vs. 2.0 (range 2.0–2.0) in SAS, P < 0.0001] between the four groups. The percent area of stenosis based on micro-computed tomography corresponded with the restenosis rates based on histopathological stenosis in different proportions in the four groups (54.8 ± 7.88 % in BMS vs. 50.4 ± 14.87 % in AES vs. 34.5 ± 7.22 % in SES vs. 28.9 ± 7.22 % in SAS, P < 0.05). SAS showed a better neointimal inhibitory effect than BMS, AES, and SES at 1 month after stenting in a porcine coronary restenosis model. Therefore, SAS with PLA can be a useful drug combination for coronary stent coating to suppress neointimal hyperplasia.