Effects of hydrogen on mechanical properties of vanadium-niobium alloys

Mechanical properties of V-Nb alloys were investigated from 78 to about 300 K. The effects of alloying composition on the yield and flow stress are consistent with a hardening model due to the “misfit”" of one element in the matrix of the other. Additions of up to about 0.6 at. pct of hydrogen have a moderate strengthening effect on the yield stress of high vanadium alloys, but relatively little effect on the high niobium alloys. Little or no effect of adding hydrogen to any of the alloys was observed for the strain hardening coefficient. High Nb alloys were found to be much less embrittled by small additions of hydrogen than were high V alloys. In addition, the failure of severely embrittled alloys was found to be initiated intergranularly by impingement of mechanical twins on grain boundaries. It is speculated that the grain boundaries may be enriched hydrogen.     

Effect of multiple sclerosis materials on polymorphonuclear neutrophils of mice

Necrotizing enterocolitis (NEC) usually occurs in low birth weight infants who have had perinatal stress, and the mortality remains significant. There are a few reports of NEC in the postoperative period, especially in young infants. Nine neonates developed NEC following operations and form the basis of this report. The interval between operation and the diagnosis of NEC varied from 3 days to 4 mo. The surgical lesions included one case each of esophageal atresia, tetralogy of Fallot, supralevator rectal atresia with rectourethral fistula, and multiple intestinal atresias. Three babies had gastroschisis and two had "apple peel" intestinal atresia. Only 3 of the 9 survived. The usual clinical findings of NEC, abdominal distention, bile stained gastric residuals and diarrhea (with or without blood), can occur in the postoperative period without NEC and are, therefore, not reliable diagnostic signs. Significant changes in the clinical course of these babies occurred from 7 hr to 5 days before the diagnosis was established. In these patients the roentgen findings that established the diagnosis of NEC included intestinal ileus, pneumatosis intestinalis, and portal vein gas. Pneumatosis intestinalis and portal vein gas were the most reliable diagnostic signs, but appeared relatively late in the course of the disease. In one case pneumatosis was seen only in retrospect. None of the patients had definite pneumoperitoneum. Awareness of NEC as a potential postoperative complication may result in early recognition, treatment and survival.     

A pilot survey of 39 Victorian WWTP effluents using a high speed luminescent umu test in conjunction with a novel GC-MS-database technique for automatic identification of micropollutants

In 2007, samples of treated effluent were collected at point of discharge to the environment from 39 wastewater treatment plants (WWTPs) located across Victoria, Australia grouped by treatment type. Sample genotoxicity was assessed with a high-throughput luminescent umu test method using Salmonella typhimurium TL210 strain, with and without addition of a commercially available metabolic activation system. Samples were also screened using a gas chromatographic-mass spectrometric mass-structure database recognition method. A genotoxic response was observed in half of the samples tested without metabolic activation system (相似文献   

Improving the Parameterization of Approximate Subdivision Surfaces

We provide a method for improving the parameterization of patching schemes that approximate Catmull‐Clark subdivision surfaces, such that the new parameterization conforms better to that of the original subdivision surface. We create this reparameterization in real‐time using a method that only depends on the topology of the surface and is independent of the surface's geometry. Our method can handle patches with more than one extraordinary vertex and avoids the combinatorial increase in both complexity and storage associated with multiple extraordinary vertices. Moreover, the reparameterization function is easy to implement and fast.     

Diagnosis and epidural hematoma by brain scan and perfusion study: case report

By using the arterial and venous phases of an anterior cerebral perfusion study, which showed downward displacement of the sagittal sinus, and the finding of a "rim" on the delayed scans, the specific diagnosis of epidural hematoma was established.     

Selective electrodeposition of metals from simulated waste solutions

Most industrial waste streams contain a number of different heavy metals. The feasibility of selective electrodeposition of cadmium, cobalt and nickel as their pure metals (99%) from binary mixtures has been investigated. Single cation linear sweep voltamograms and nucleation potential measurements have been made and used to predict the optimum potentials and conditions for selective electro-deposition from the mixed-cation solutions. The anions used in this work are SO₄ ^2–, Cl^– and BF₄ . The optimum potential for removal by electrodeposition of Cd from a solution containing Cd(ii) and Co(ii) or Ni(ii) without codepositing Co or Ni has been evaluated from a simple diagram constructed from nucleation potential measurements. It is shown that the [Cd(ii)] remaining in the solution after exhaustive electrolysis at a fixed potential is determined by the Nernst equation, and not by the electrolysis time provided that a critical minimum time has been exceeded.     

Classes of Split‐plot Response Surface Designs for Equivalent Estimation

When planning an experimental investigation, we are frequently faced with factors that are difficult or time consuming to manipulate, thereby making complete randomization impractical. A split‐plot structure differentiates between the experimental units associated with these hard‐to‐change factors and those that are relatively easy‐to‐change. Furthermore, it provides an efficient strategy that integrates the restrictions imposed by the experimental apparatus into the design structure. In this paper, several industrial and scientific examples are presented to highlight design considerations when a restriction on randomization is encountered. We propose classes of split‐plot response designs that provide an intuitive and natural extension from the completely randomized context. For these designs, the ordinary least‐squares estimates of the model are equivalent to the generalized least‐squares estimates. This property provides best linear unbiased estimators and simplifies model estimation. The design conditions that provide equivalent estimation are presented and lead to design construction strategies to transform completely randomized Box–Behnken, equiradial and small composite designs into a split‐plot structure. Published in 2006 by John Wiley & Sons, Ltd.     

Results demonstrating techniques for enhancing electrochemical reactions involving iron oxide in slags and C in liquid iron

Two techniques are described for the enhancement of the kinetics of reduction of iron oxide from slags by carbon in molten iron. Laboratory experiments have shown that the rate of iron oxide reduction by carbon-saturated iron can be increased by 5 to 10 times when the reaction is carried out under a reduced-pressure atmosphere. This effect is thought to be the result of the increased volumetric gas evolution through the slag layer and the associated increase in slag stirring. A model is presented, which relates the mass-transfer coefficient for ferrous ions in the slag to its stirring that is controlled by varying the ambient pressure. Additional laboratory experiments examined the electrochemical nature of iron oxide reduction from slag by carbon in liquid iron. Results indicate that the reduction of iron oxide from slag is increased in the presence of an applied electric field. The external circuit allows for the separation of the half-cell reactions associated with iron oxide reduction and decarburization and increases the reaction area available for the individual reactions. These results have significant implications for several important slag metal reactions, which occur during ironmaking and steelmaking operations.     

The Problem of Measurement Model Misspecification in Behavioral and Organizational Research and Some Recommended Solutions.

The purpose of this study was to review the distinction between formative- and reflective-indicator measurement models, articulate a set of criteria for deciding whether measures are formative or reflective, illustrate some commonly researched constructs that have formative indicators, empirically test the effects of measurement model misspecification using a Monte Carlo simulation, and recommend new scale development procedures for latent constructs with formative indicators. Results of the Monte Carlo simulation indicated that measurement model misspecification can inflate unstandardized structural parameter estimates by as much as 400% or deflate them by as much as 80% and lead to Type I or Type II errors of inference, depending on whether the exogenous or the endogenous latent construct is misspecified. Implications of this research are discussed. (PsycINFO Database Record (c) 2011 APA, all rights reserved)