Fabrication of HfO2 patterns by laser interference nanolithography and selective dry etching for III-V CMOS application

Nanostructuring of ultrathin HfO2 films deposited on GaAs (001) substrates by high-resolution Lloyd's mirror laser interference nanolithography is described. Pattern transfer to the HfO2 film was carried out by reactive ion beam etching using CF4 and O2 plasmas. A combination of atomic force microscopy, high-resolution scanning electron microscopy, high-resolution transmission electron microscopy, and energy-dispersive X-ray spectroscopy microanalysis was used to characterise the various etching steps of the process and the resulting HfO2/GaAs pattern morphology, structure, and chemical composition. We show that the patterning process can be applied to fabricate uniform arrays of HfO2 mesa stripes with tapered sidewalls and linewidths of 100 nm. The exposed GaAs trenches were found to be residue-free and atomically smooth with a root-mean-square line roughness of 0.18 nm after plasma etching.PACS: Dielectric oxides 77.84.Bw, Nanoscale pattern formation 81.16.Rf, Plasma etching 52.77.Bn, Fabrication of III-V semiconductors 81.05.Ea.     

Probing the local structure of dilute Cu dopants in fluorescent ZnS nanocrystals using EXAFS

A local structure study of ZnS nanocrystals, doped with very low concentrations of Cu, was carried out using the EXAFS technique to better understand how Cu substitutes into the host lattice and forms Cu luminescence centers. We show that a large fraction of the Cu have three nearest neighbor S atoms and the Cu-S bond is significantly shortened compared to Zn-S, by ～0.08 ?. In addition, the second neighbor Cu-Cu peak is extremely small. We propose that Cu occupies an interior site next to a S(2-) vacancy, with the Cu displaced towards the remaining S(2-) and away from the vacancy; such a displacement immediately explains the lack of a significant Cu-Cu peak in the data. There is no evidence for interstitial Cu sites (Cu(i)), indicating that no more than 2% of the Cu are Cu(i.) This study provides new insights into the local structure of the Cu dopant in ZnS without the presence of CuS nanoprecipitates that are present at higher Cu doping levels.     

Leaf Chemistry and Foliage Avoidance by the Thrips <Emphasis Type="Italic">Frankliniella occidentalis</Emphasis> and <Emphasis Type="Italic">Heliothrips haemorrhoidalis</Emphasis> in Glasshouse Collections

Observational studies on foliage avoidance by the polyphagous thrips species Frankliniella occidentalis (Pergande) and Heliothrips haemorrhoidalis (Bouché) (Thysanoptera: Thripidae) identified six non-host species (Allagopappus dichotomus (Asteraceae), Gardenia posoquerioides (Rubiaceae), Plectranthus aff. barbatus, Plectranthus strigosus, Plectranthus zuluensis (Lamiaceae), and Sclerochiton harveyanus (Acanthaceae) among plants growing within a major glasshouse botanical collection. The effects of sequentially obtained acetone and aqueous methanol leaf extracts on mortality in first instar Frankliniella occidentalis were assessed. The acetone leaf extract of Sclerochiton harveyanus, which had the highest activity against the thrips, yielded four new iridoids, sclerochitonosides A–C, and sclerochitonoside B 4′-methyl ether. Mortality of F. occidentalis was increased on exposure to all four iridoids, and the most active iridoid was sclerochitonoside A (8-epiloganic acid 4′-hydroxyphenylethyl ester). Choice experiments demonstrated that this compound did not significantly deter H. haemorrhoidalis from treated leaf surfaces. The significance of iridoids in the defense mechanism of plants against thrips is discussed.     

Au dissolution during the anodic response of short-chain alkylthiols with polycrystalline Au electrodes

The electrochemical characteristics of polycrystalline Au in LiClO₄ electrolyte solutions containing 3-mercaptopropionic acid (MPA) or meso-2,3-dimercaptosuccinic acid (DMSA) were studied with linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS) over a wide range of positive potentials vs. Ag/AgCl. The EIS data exhibited linear capacitive behaviour at 0.0 V with either MPA or DMSA added directly to the electrolyte suggesting the formation of an adsorbed layer of the alkylthiol on the electrode surface. Above this potential, a single well-defined impedance loop appeared for electrolyte solutions containing DMSA or MPA, an observation indicative of a charge transfer reaction that could be related to several processes including oxidative desorption, oxidation of the alkylthiol, or Au oxidation/dissolution. To test for Au dissolution, the electrode was held at 0.8 V vs. Ag/AgCl for 12 h in electrolytes containing MPA or DMSA followed by surface analysis with Atomic Force Microscopy and solution analysis with Atomic Absorption Spectroscopy. When the electrolyte contained MPA, the extended potential holding procedure resulted in significant roughening of the electrode with no detectable quantities of Au in the electrolyte. X-ray photoelectron spectroscopy (XPS) analysis of the Au surface revealed an additional species in the Au 4f_7/2 spectrum indicating the presence of an insoluble electrochemically generated Au(I)–MPA species. When the electrolyte contained DMSA, the Au electrode appeared smoother, 56.6 ± 9.6 ppb of Au was detected in the electrolyte and the XPS analysis displayed a single species in the Au 4f_7/2 spectrum indicative of metallic Au after the potential holding procedure. Both observations with MPA and DMSA support the charge transfer resistance to be at least partially related to the corrosion of Au, but also suggest that an electrochemically generated Au–DMSA species is soluble and of potential industrial relevance.     

Experimental Validation of a Fundamental Model for PCR Efficiency

Recently a theoretical analysis of PCR efficiency has been published by Booth et al. (2010). The PCR yield is the product of three efficiencies: (i) the annealing efficiency is the fraction of templates that form binary complexes with primers during annealing, (ii) the polymerase binding efficiency is the fraction of binary complexes that bind to polymerase to form ternary complexes and (iii) the elongation efficiency is the fraction of ternary complexes that extend fully. Yield is controlled by the smallest of the three efficiencies and control could shift from one type of efficiency to another over the course of a PCR experiment. Experiments have been designed that are specifically controlled by each one of the efficiencies and the results are consistent with the mathematical model. The experimental data has also been used to quantify six key parameters of the theoretical model. An important application of the fully characterized model is to calculate initial template concentration from real-time PCR data. Given the PCR protocol, the midpoint cycle number (where the template concentration is half that of the final concentration) can be theoretically determined and graphed for a variety of initial DNA concentrations. Real-time results can be used to calculate the midpoint cycle number and consequently the initial DNA concentration, using this graph. The application becomes particularly simple if a conservative PCR protocol is followed where only the annealing efficiency is controlling.     

Evolution of directly-spinnable carbon nanotube growth by recycling analysis

Carbon nanotubes (CNTs) grown on substrate-bound catalysts by CVD are influenced by the catalyst, which changes over the course of the process. The evolution of the CNT growth is revealed by breaking the process into recycling increments and using the phenomenon of ‘direct spinnability’ as a target characteristic.Using acetylene alone, it was found that the first four cycles gave 100% regrowth in height and mass yield of CNTs, with both properties falling to around 20% on the 5th cycle. A decrease in nanotube diameter was observed whilst the areal density increased. With the addition of hydrogen a 100% regrowth for the second cycle was observed, followed by a decrease to around 55%, 18% and 11% in both height and yield for subsequent cycles. The diameter increased, whilst the areal density decreased in subsequent cycles.In the absence of hydrogen the CNTs have around seven walls, decreasing to about three by the seventh cycle. With hydrogen, CNTs have five or six walls for all cycles. Raman spectroscopy indicates an increase in disorder in later cycles. Spinnability is high for initial cycles but drops sharply on the fourth cycle, or third cycle with hydrogen, as the nanotube forest tortuosity markedly increases.     

英国国家电网公司在电力系统状态估计器及安全分析方面的经验

本文叙述了由安装在英国国家电网公司新国调中心的新型能量管理系统所提供的实时网络分析的应用，并介绍了第一年的运行经验．对经常出现的某些状态估计问题的解决方法和作者所作的尝试的结论进行了讨论，以对安全估计器的结果与现有的离线研究方法的结果进行比较．文章还对应用实时网络分析时遇到的一些原始缺陷的观察结果和在短时段及较长时段内解决这些问题的方法进行了讨论．     

Synthetic Studies of Biomimetic Diels–Alder Processes toward the Helicterin Family of Natural Products

Although the [2.2.2]-bicyclooctene core of the helicterin, helisorin, and helisterculin class of neolignan natural products could conceivably arise in Nature via Diels–Alder reactions, synthetic explorations have revealed that only under very non-biomimetic conditions can such cycloadditions be performed. In this article, we provide a personal account of explorations towards this natural product family, sharing some additional unpublished synthetic work to test the viability of an alternate, Diels–Alder-based, biogenetic hypothesis for the generation of this unique collection of secondary metabolites.     

Carbonization and liquid-crystal (mesophase) development. 16. Carbonizations of soluble and insoluble fractions of coal-extract solution

A coal-extract solution prepared by extraction of a coking coal (CRC 301a) with anthracene oil by the National Coal Board is separated into fractions using solvents of increasing solvent power. These fractions are carbonized to 823 K and the optical textures of resultant cokes are assessed. The objective of the study is to examine the role of the molecular components of the coal-extract solution including the residual anthracene oil in mechanisms of formation of the optical texture of the anisotropic coke. Generally, the low-molecular-weight fractions of the coal-extract solution produce cokes with larger sized optical textures than the coke from the parent coal-extract solution. The higher-molecular-weight fractions produce cokes with smaller sized optical textures. Isotropic coke is produced from material which is not soluble in benzene and tetrahydrofuran. Within this parent-coal-extract solution it would appear that the dominant partner effect is influential over the size of the optical texture of coke from the coal-extraction solution, that is the minor component of smaller molecules controls the necessary growth of liquid crystals. Also, the presence of anthracene oil augments the size of optical texture of resultant cokes by providing the necessary physical fluidity of the system and possibly some chemical stability.