Fabrication of Flexible and Transparent Conductive Nanosheets by the UV‐Irradiation of Gold Nanoparticle Monolayers

Conductive films that are highly transparent and flexible are extremely attractive for emerging optoelectronic applications. Currently, indium‐doped tin oxide films are the most widely used transparent conductive films and much research effort is devoted to developing alternative transparent conductive materials to overcome their drawbacks. In this work, a novel and facile approach for fabricating transparent conductive Au nanosheets from Au nanoparticles (AuNPs) is proposed. Irradiating an AuNP monolayer at the air–water interface with UV light results in a nanosheet with ≈3.5 nm thickness and ≈80% transparency in the UV–visible region. Further, the so‐fabricated nanosheets are highly flexible and can maintain their electrical conductivity even when they are bent to a radius of curvature of 0.6 mm. Fourier‐transform infrared and X‐ray photoelectron spectroscopy characterizations reveal that the transformation of the monolayer of AuNPs into the nanosheet is induced by the photodecomposition and/or photodetachment of the dodecanethiol ligands capping the AuNPs. Further, the UV‐irradiation of a hybrid monolayer consisting of AuNPs and silica particles affords the patterning of Au nanosheets with periodic hole arrays.     

Facilitated permeation of myoglobin through porous membranes: Different permeation behavior through membranes of polyoxyethylene- and dextran-conjugated polyamides prepared by quasi-living polymerization of a bicyclic lactam

In the ultrafiltration test of a myoglobin solution through porous membranes of the ABA-type block copolymers composed of polyamide as outer segments and polyoxyethylene (M_n = 1.9–2.0 × 10⁴) as an inner segment, in which the values of weight fraction of the polyamide segments (W) were 0.90, 0.84, 0.82, 0.81, and 0.73, the concentration of the permeate was found to be much higher than that in feed under the pressure difference of 1–2 kg/cm². Such singularly facilitated permeation was observed also in the test through the dense membranes of the polyamide–polyoxyethylene block copolymer with W of 0.81 and 0.73. On the other hand, neither porous nor dense membranes of the graft copolymer (W = 0.83) having a dextran stock (M_n = 1.8 × 10⁴) and 2.6 pieces of polyamide branches showed similar facilitated permeation, although dextran was soluble in water as well as polyoxyethylene. The apparent interaction of myoglobin with dextran may be stronger than that with polyoxyethylene. © 1994 John Wiley & Sons, Inc.     

Development of ultra-deep HDS catalyst for production of clean diesel fuels

Cosmo Oil has successfully developed a new CoMo HDS catalyst, C-606A, for production of ultra-low sulfur diesel fuels. This catalyst was prepared by an impregnation method using a solution containing Co, Mo, P, and citric acid on a HY-Al₂O₃. The resulting catalyst air-dried only without calcination. The HDS activity was measured with straight-run light gas oil feedstocks under industrial hydrotreating conditions. C-606A had a three times higher HDS activity compared with the conventional CoMoP/Al₂O₃ catalyst. Commercial operation with C-606A has successfully demonstrated high performance. This catalyst has superior activity, which enables <10-ppm sulfur content in products in a commercial hydrotreater designed to produce 500-ppm sulfur diesel fuels.     

Pd-catalyzed hydrosilylation polymerization of a dihydrosilane with diyne/triyne mixed systems affording crosslinked silylene-divinylene polymers and their properties

Treatment of a dihydrosilane (methylphenylsilane, 1) with mixtures of a diyne (p- or m-diethynylbenzene, 2a or 2b) and a triyne (1,3,5-triethynylbenzene, 3a or B,B′,B″-triethynyl-N,N′,N″-trimethylborazine, 3b; 1:2:3=100:95:5, 100:90:10, 100:80:20) in the presence of Pd-PCy₃ (Cy=cyclohexyl) catalyst gave new crosslinked silylenedivinylene polycarbosilanes. In TGA the resulting crosslinked polymers tended to show higher Td₅ values and higher char yields than the corresponding linear polymers. On the other hand, UV/vis absorption spectra of the crosslinked polymers obtained in the reactions of 2a or 2b with 3a exhibited increased broad peaks around 390 nm for 2a or 360 nm for 2b. Coincidently, their fluorescence spectra showed significant increase of the emission peaks in 400-550 nm. The crosslinked polymer derived from 2a and 3b, however, showed decrease of the absorption peak around 390 nm and profound depression of fluorescence peaks in 400-550 nm.     

Calibration method for a carbon nanotube field-effect transistor biosensor

An easy calibration method based on the Langmuir adsorption theory is proposed for a carbon nanotube field-effect transistor (NTFET) biosensor. This method was applied to three NTFET biosensors that had approximately the same structure but exhibited different characteristics. After calibration, their experimentally determined characteristics exhibited a good agreement with the calibration curve. The reason why the observed characteristics of these NTFET biosensors differed among the devices was that the carbon nanotube (CNT) that formed the channel was not uniform. Although the controlled growth of a CNT is difficult, it is shown that an NTFET biosensor can be easy calibrated using the proposed calibration method, regardless of the CNT channel structures.     

Label-free protein biosensor based on aptamer-modified carbon nanotube field-effect transistors

We have fabricated label-free protein biosensors based on aptamer-modified carbon nanotube field-effect transistors (CNT-FETs) for the detection of immunoglobulin E (IgE). After the covalent immobilization of 5'-amino-modified 45-mer aptamers on the CNT channels, the electrical properties of the CNT-FETs were monitored in real time. The introduction of target IgE at various concentrations caused a sharp decrease in the source-drain current, and a gradual saturation was observed at lower concentrations. The amount of the net source-drain current before and after IgE introduction on the aptamer-modified CNT-FETs increased as a function of IgE concentration. The detection limit for IgE was determined as 250 pM. We have also prepared CNT-FET biosensors using a monoclonal antibody against IgE (IgE-mAb). The electrical properties of the aptamer- and antibody-modified CNT-FETs were compared. The performance of aptamer-modified CNT-FETs provided better results than the ones obtained using IgE-mAb-modified CNT-FETs under similar conditions. Thus, we suggest that the aptamer-modified CNT-FETs are promising candidates for the development of label-free protein biosensors.     

Effects of photo-induced graft polymerization of 2-methacryloyloxyethyl phosphorylcholine on physical properties of cross-linked polyethylene in artificial hip joints

Osteolysis caused by wear particles from polyethylene in the artificial hip joints is a serious issue. We have used photo-induced radical graft polymerization to graft 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer onto the surface of cross-linked polyethylene (CLPE-g-MPC) in order to reduce friction and wear at the bearing surface of the joint. The physical and mechanical properties of CLPE and CLPE-g-MPC were not significantly different, expect that the friction coefficient of untreated CLPE cups was 0.0075, compared with 0.0009 for CLPE-g-MPC cup, an 88% reduction. After 3.0 × 10⁶ cycles in the hip joint simulator test, we could not observe any wear of CLPE-g-MPC cups. We concluded that the advantage of photo-induced radical graft polymerization technique was that the grafted MPC polymer gave a high lubricity only on the surface and has no effect on the bulk properties of the CLPE substrate.     

Prevention of melanin formation by yeast cerebroside in B16 mouse melanoma cells

The effects of plant and yeast cerebrosides on melanin formation were examined in B16 mouse melanoma cells. Addition of yeast cerebroside significantly reduced melanin content to the same level as that of arbutin in control cells, although there was no suppression by plant cerebrosides and bovine brain cerebroside up-regulated melanin formation. None of the bovine brain cerebrosides examined had any effect on tyrosinase activity, but yeast cerebroside reduced the contents of tyrosinase. The results of the present study clearly showed that melanin formation is regulated by several different cerebrosides via tyrosinase. In addition, the findings presented here suggest that cerebrosides containing a 9-methyl type sphingoid base, such as yeast cerebroside, may be useful as skincare products for suppressing melanin formation.     

Developments in asymmetric hydrogenation from an industrial perspective

Examples of developments in asymmetric hydrogenation from various perspectives, in an effort to improve efficiency, are reported. Discussed in this Account are (1) the improved synthesis of BINAP ligands, (2) the design of SEGPHOS ligands for higher enantioselectivity, (3) a new protocol with fewer reaction steps to synthesize beta-aminoesters, and (4) a novel asymmetric hydrogenation mediated by a copper catalyst.     

Measurement of the damping coefficient of an electric power system by use of a superconducting magnet energy storage system

In this paper, a new application of superconducting magnetic energy storage (SMES) for diagnosis of power systems is proposed. Basic experiments for measurement of damping coefficient of power systems by use of SMES are carried out in an experimental system with a small generator, artificial transmission lines, and a small SMES. The SMES produces small power disturbances in the power system without affecting its operating conditions. The small power oscillations in the power system due to continuous power disturbances generated by SMES are observed. The relations among the damping coefficient, the power disturbances, and the power change of SMES are discussed for a one-machine infinite-bus system. The damping coefficients of the power system are obtained by investigating the oscillations due to the sinusoidal power changes of the SMES. The possibility of estimation of the steady-state power system stability by monitoring the damping coefficients of an operating power system by the use of SMES can be shown experimentally. © 1997 Scripta Technica, Inc. Electr Eng Jpn, 119(3): 40–48, 1997