On measures of vulnerability of interconnection networks

With the advent of distributed and multiple processing systems, the study of interconnection networks has developed into a field of its own. In most cases, the performance measures used to characterize the reliability of such networks have been primitive.It is our purpose, in this brief paper, to survey the many available measures of the vulnerability of interconnection networks. The most widely known is classical connectivity; however, measures more recently introduced in the graph theory literature are probably a better practical metric of reliability. Our objective is to make these measures more widely known, and to spur the development of good algorithms to calculate them in practical instances.     

A WDM-PON Employing Fabry–PÉrot Laser Diodes Without a Seed Light Injection

We propose and demonstrate a wavelength-division-multiplexed passive optical network by employing double-contact Fabry-Perot laser diodes (F-P LDs) without a seed light injection. To avoid the high mode partition noise at low frequency, we use a binary phase-shift keying as a modulation format at a low relative intensity noise window. An error-free transmission is achieved by compensating a lasing envelope shift due to temperature variation with the double-contact F-P LD.     

Reconfigurable Microstrip Patch Antenna with Switchable Polarization

A novel reconfigurable microstrip patch antenna with frequency and polarization diversities is proposed. A U‐slot is incorporated into a square patch, and a PIN diode is utilized to switch the slot on and off, which realizes the frequency diversity characteristic. The polarization diversities among linear polarization (LP), right‐hand circular polarization (RHCP), and left‐hand circular polarization (LHCP) are also obtained by switching three PIN diodes on the slot and the truncating corners of a square patch on and off. The antenna design and experimental results are presented.     

Chemical processing and characterization of spinel-type thermistor powder in the Mn-Ni-Fe oxide system

The coprecipitated Mn-Ni-Fe oxalate was prepared from the mixed sulfate solution by optimum pH control. The chemical composition agreed well with that of the starting solution, and the thermal decomposition of the Mn-Ni-Fe oxalate in air below 600 °C led to the direct formation of cubic spinel phase with fine particle size. The sinterability of the calcined powder, the stability of cubic spinel phase and the influence of annealing temperature on electrical properties of the sintered bodies, were investigated.     

Pore‐free mold‐pattern‐transfer method for barrier ribs of HD PDPs

Abstract— Among various barrier‐rib manufacturing processes, the mold‐pattern‐transfer method has potential to reduce processing cost as well as the manufacture of high‐resolution pixels. In this study, the effects of major processing variables of the mold‐pattern‐transfer process on the formation of air‐trapped pores within barrier ribs were examined. The results indicated that with an optimum combination of the processing variables, barrier ribs without trapped defects can be produced, demonstrating the possibility of reducing the number of processing steps and costs of barrier ribs.     

A 3.3-V single power supply 16-Mb nonvolatile virtual DRAM using aNAND flash memory technology

A 3.3-V 16-Mb nonvolatile memory having operation virtually identical to DRAM with package pin compatibility has been developed. Read and write operations are fully DRAM compatible except for a longer RAS precharge time after write. Fast random access time of 63 ns with the NAND flash memory cell is achieved by using a hierarchical row decoder scheme and a unique folded bit-line architecture which also allows bit-by-bit program verify and inhibit operation. Fast page mode with a column address access time of 21 ns is achieved by sensing and latching 4 k cells simultaneously. To allow byte alterability, nonvolatile restore operation with self-contained erase is developed. Self-contained erase is word-line based, and increased cell disturb due to the word-line based erase is relaxed by adding a boosted bit-line scheme to a conventional self-boosting technique. The device is fabricated in a 0.5-μm triple-well, p-substrate CMOS process using two-metal and three-poly interconnect layers. A resulting die size is 86.6 mm², and the effective cell size including the overhead of string select transistors is 2.0 μm²     

The dendritic growth of γ′ precipitates and grain

The growth pattern of γ precipitates in the grains and at the grain boundaries has been investigated in a Ni-24Co-4Al-4Ti-5Cr-5Mo (weight percent) alloy of very small lattice misfit between the precipitate and the matrix phases under varying heat-treatment conditions. When aged at temperatures lower than the solvus temperature (T _s = 1150 °C) by more than 30 °C after direct cooling from the solution-treatment temperature, the nucleation density is high. In this condition, the supersaturation is quickly removed because of the overlapping diffusion fields and the precipitates undergo Ostwald ripening from the early stage. The precipitates then have an equilibrium shape of spheres in the grains and truncated spheres at nearly straight grain boundaries. The precipitates at the grain boundaries are coherent with one of the grains, and their number density is not much larger than that in the grains, apparently because of a large contact angle (about 150 deg) with the grain boundary. Quenching the alloy after the solution treatment and aging at any temperature also produce high precipitate number density and equilibrium shapes. When aged at temperatures just belowT _s (above 1140 °C), the nucleation density is low, the precipitates grow dendritically in the grains, and the grain boundaries become serrated. The observed dendritic growth characteristics do not quantitatively agree with the predictions of Mullins and Sekerka theory, but the discrepancy may be due to the uncertainties in both the observed and calculated quantities. By deeply etching the matrix, it is shown that the grain boundary serration is produced by the precipitates growing preferentially in the direction of the incoherent boundary because of the rapid solute diffusion along the grain boundary. The dendritic growth and grain boundary serration can be obtained also by slowly cooling through the temperature range just belowT _s.     

Unconstrained and constrained motion control of a planar two-link structurally flexible robotic manipulator

Unconstrained and constrained motion control of a planar two-link structurally-flexible robotic manipulator are considered in this study. The dynamic model is obtained by using the extended Hamilton's principle and the Galerkin criterion. A method is presented to obtain the linearized equations of motion in Cartesian space for use in designing the control system. The approach to solving the control problem is to use feedforward and feedback control torques. The feedforward torques maneuver the flexible manipulator along a nominal trajectory and the feedback torques minimize any deviations from the nominal trajectory. The feedforward and feedback torques are obtained by solving the inverse dynamics problem for the rigid manipulator and designing linear quadratic Gaussian with loop transfer recovery (LQG/LTR) compensators, respectively. The LQG/LTR design methodology is exploited to design a robust feedback control system that can handle modeling errors and sensor noise, and operate on Cartesian space trajectory errors. Computer simulated results are presented for an example planar, two-link, structurally flexible robotic manipulator. © 1994 John Wiley & Sons, Inc.