The use of basalt powder as a natural heterogeneous catalyst in the Fenton and Photo-Fenton oxidation of cationic dyes

The use of naturally present heterogeneous catalysts has recently been an essential issue in the Fenton and photo-Fenton processes. In this study, the uses of basalt as a catalyst for the Fenton and photo-Fenton reactions for methylene Blue (MB) and Basic Red 18 (BR18) degradations were investigated. Basalt was selected because of the presence of the iron (III) oxide in the structure. Basalt was characterized by X-Ray Fluorescence (XRF) and X-Ray Diffraction (XRD) analysis to obtain the chemical composition and the crystalline phase. The surface charge and the surface area were obtained by zeta potential and Brunauer Emmett-Teller (BET) analysis. Fourier Transform Infrared Spectroscopy (FTIR) and scanning electron microscope (SEM) were utilized to explore the functional group and the surface morphology. Fenton and photo-Fenton processes were applied to explore the best degradation method. Adsorption was also tested and the adsorption process had minimum removal efficiency (12% for MB and 17% for BR18). The removal efficiencies for MB and BR18 by the Fenton process were 87% and 28%, respectively. The photo-Fenton process had maximum removal efficiency with 100% for MB and 70% for BR18. The optimum conditions were 70 mg/L dye concentration, 5 mM H₂O₂, 1.0 g/L basalt loading and pH 2. Basalt has shown reuse capability as a catalyst for three consecutive cycles.     

Trans-differentiation of human adipose-derived mesenchymal stem cells into cardiomyocyte-like cells on decellularized bovine myocardial extracellular matrix-based films

In this study, we aimed at fabricating decellularized bovine myocardial extracellular matrix-based films (dMEbF) for cardiac tissue engineering (CTE). The decellularization process was carried out utilizing four consecutive stages including hypotonic treatment, detergent treatment, enzymatic digestion and decontamination, respectively. In order to fabricate the dMEbF, dBM were digested with pepsin and gelation process was conducted. dMEbF were then crosslinked with N-hydroxysuccinimide/1-Ethyl-3-(3-dimethylaminopropyl)-carbodiimide (NHS/EDC) to increase their durability. Nuclear contents of native BM and decellularized BM (dBM) tissues were determined with DNA content analysis and agarose-gel electrophoresis. Cell viability on dMEbF for 3rd, 7th, and 14th days was assessed by MTT assay. Cell attachment on dMEbF was also studied by scanning electron microscopy. Trans-differentiation capacity of human adipose-derived mesenchymal stem cells (hAMSCs) into cardiomyocyte-like cells on dMEbF were also evaluated by histochemical and immunohistochemical analyses. DNA contents for native and dBM were, respectively, found as 886.11?±?164.85 and 47.66?±?0.09?ng/mg dry weight, indicating a successful decellularization process. The results of glycosaminoglycan and hydroxyproline assay, and sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), performed in order to characterize the extracellular matrix (ECM) composition of native and dBM tissue, showed that the BM matrix was not damaged during the proposed method. Lastly, regarding the histological study, dMEbF not only mimics native ECM, but also induces the stem cells into cardiomyocyte-like cells phenotype which brings it the potential of use in CTE.     

Selective removal of Cr(VI) ions from aqueous solutions including Cr(VI), Cu(II) and Cd(II) ions by 4-vinly pyridine/2-hydroxyethylmethacrylate monomer mixture grafted poly(ethylene terephthalate) fiber

In this study, a new reactively fibrous adsorbent was prepared by grafting 4-vinly pyridine (4-VP) and 2-hydroxyethylmethacrylate (HEMA) monomer mixture onto poly(ethylene terephthalate) (PET) fibers for removal of Cr(VI), Cu(II) and Cd(II) metal ions from aqueous solution by using batch adsorption method. The influence of various parameters such as graft yield (GY), pH, adsorption time, initial ion concentration and adsorption temperature was investigated. The selectivity of the reactive fiber was also examined. The results show that the adsorbed amount of metal ions followed as given in the order Cr(VI) > Cd(II) > Cu(II). At pH 3, Cr(VI) was removed by 99% while the initial concentration of ions was at 5 mg L⁻¹ and by 94% at 400 mg L⁻¹. It was found that the grafted fiber is more selective for Cr(VI) ions in the mixed solution of Cr(VI)–Cu(II), Cr(VI)–Cd(II) and Cr(VI)–Cu(II)–Cd(II) at pH 3 and it was observed that the grafted fibers are stable and regenerable by acid and base without losing their activity.     

Shear strength of reinforced concrete beams with stirrups

This study presents alternative shear strength prediction equations for reinforced concrete (RC) beams with stirrups. The shear strength is composed of the contribution of the nominal shear strength provided by stirrups and the nominal shear strength provided by concrete. For the concrete contribution, cracking shear strength values estimated by Arslan’s equations are almost same those obtained with ACI 318 simplified equation in terms of coefficient of variation (COV). However, mean values estimated by ACI 318 tend to be more conservative comparing to the mean values obtained with Arslan’s equations. Thus, for the consideration of concrete contribution to shear strength, Arslan’s equations are used. To obtain the shear strength of RC beams, shear strength provided by stirrups is added to the concrete shear strength estimated by Arslan’s equations. Results of existing 339 beam shear tests are used to investigate how accurate proposed equation estimates the shear strength of RC beams. Furthermore, ACI 318 and TS500 provisions are also compared to the aforementioned test results. It is found that proposed equations for beams with shear span to depth ratios (a/d) between 1.5 and 2.5 are also conservative with a lower COV than ACI 318 and TS500. However, when a/d ratios exceed 2.5 (both normal and high strength concrete beams), ACI 318, TS500 and proposed equations give similar COV value.     

Growth and characterization of Ni:DLC composite films using pulsed laser deposition technique

The structure and surface morphology of Ni-incorporated diamond like carbon (Ni:DLC) films have been investigated. These films were deposited on Si substrates using pulsed laser deposition (PLD) technique. A KrF Excimer laser (λ = 248 nm) was used for co-ablation from multi component Ni–graphite target. The concentration of Ni was varied by ablating the Ni part of the target with various numbers of laser pulses. The SEM and AFM analysis reveals that the surface is composed of segregates of Ni which increases with the increase in Ni content during the growth process. The structural investigations by XRD and Raman spectroscopy provided information about the orientation of the incorporated constituent and the ordering of the carbon species. Maximum height of the nano structures which were observed on the surface was ∼50 nm. The G-peak of the graphite was shifted towards higher wave number due to enhancement in SP² sites which have been increased due to the increase in the Ni concentration. A small change in the surface roughness ranging from 7.78 nm to 13.1 nm due to increased Ni concentration was also observed.     

Characterization of cryogenic heat treated Vanadis 4 PM cold work tool steel

The amount of retained austenite in the quenched cold work tool steel sample is 17.7%, in the condition of sub-zero heat treated and double tempered samples following by quenching is 1.9% determined by XRD analysis. The types of carbides (MC, M₇C₃, M₂₃C₆) present in the structure was determined by XRD and SEM-EDS analysis. The hardness of test samples were 865 HV(0.1) for quenched sample and 785 HV(0.1) forth sample subjected to sub-zero treatment and double tempered after the quenching.     

Mixed-mode fracture performance of fibre reinforced concrete under impact loading

A test procedure developed to determine the mixed-mode impact resistance of fibre reinforced concrete materials is described. Results are presented from a series of experiments using a repeated drop-weight impact apparatus for the impact resistance of both polypropylene and steel fibre reinforced concrete. The behaviour of the mixed-mode specimen geometry was investigated under impact loading condition. The effect of the fibre types and contents on the impact fracture energy of the specimens was investigated. A close investigation was made of the positions and formations of the crack patterns. The fracture performance of the plain and fibre reinforced concrete was investigated with the proposed geometry using 1.0, 2.0 and 3.0% by weight in the case of steel fibre, and 0.1, 0.2 and 0.3% by weight in the case of polypropylene fibre.

---

Resume Aux charges statiques auxquelles les structures en béton sont soumises s'ajoutent souvent des charges dynamiques, parfois significatives, qu'il convient de prendre en compte dans le calcul. Cet article décrit un mode opératoire visant à déterminer la résistance au choc en mode mixte de béton renforcé de fibres (FRC). On y présente les résultats d'une série d'essais utilisant une machine d'essai au choc à répétition (mouton) pour évaluer la résistance de béton renforcé de fibres d'acier et de fibres de polypropylène. On a mis au point une géométrie d'éprouvettes en mode mixte qu'on a soumises à des essais au choc, et on a étudié l'effet des types et des pourcentages de fibres sur la résistance des éprouvettes à la rupture par choc. On s'est aussi livré à une étude précise des emplacements et de la formation des fissures. On a examiné la résistance à la rupture de béton ordinaire et de béton de fibres dans la géométrie proposée avec des pourcentages de 1, 2 et 3% en poids de fibres d'acier, et de 0,1, 0,2 et 0,3% pour les fibres de polypropylène.

     

A Novel Contour Tracing Algorithm for Object Shape Reconstruction Using Parametric Curves

Parametric curves such as Bézier and B-splines, originally developed for the design of automobile bodies, are now also used in image processing and computer vision. For example, reconstructing an object shape in an image, including different translations, scales, and orientations, can be performed using these parametric curves. For this, Bézier and B-spline curves can be generated using a point set that belongs to the outer boundary of the object. The resulting object shape can be used in computer vision fields, such as searching and segmentation methods and training machine learning algorithms. The prerequisite for reconstructing the shape with parametric curves is to obtain sequentially the points in the point set. In this study, a novel algorithm has been developed that sequentially obtains the pixel locations constituting the outer boundary of the object. The proposed algorithm, unlike the methods in the literature, is implemented using a filter containing weights and an outer circle surrounding the object. In a binary format image, the starting point of the tracing is determined using the outer circle, and the next tracing movement and the pixel to be labeled as the boundary point is found by the filter weights. Then, control points that define the curve shape are selected by reducing the number of sequential points. Thus, the Bézier and B-spline curve equations describing the shape are obtained using these points. In addition, different translations, scales, and rotations of the object shape are easily provided by changing the positions of the control points. It has also been shown that the missing part of the object can be completed thanks to the parametric curves.     

Multivariate analysis of anionic, cationic and nonionic textile surfactant degradation with the H(2)O(2)/UV-C process by using the capabilities of response surface methodology

Anionic, cationic and nonionic surfactants being frequently employed in the textile preparation process were subjected to H(2)O(2)/UV-C treatment. As a consequence of the considerable number of parameters affecting the H(2)O(2)/UV-C process, an experimental design methodology was used to mathematically describe and optimize the single and combined influences of the critical process variables treatment time, initial H(2)O(2)concentration and chemical oxygen demand (COD) on parent pollutant (surfactant) as well as organic carbon (COD and total organic carbon (TOC)) removal efficiencies. Multivariate analysis was based on two different photochemical treatment targets; (i) full oxidation/complete treatment of the surfactants or, alternatively, (ii) partial oxidation/pretreatment of the surfactants to comply with the legislative discharge requirements. According to the established polynomial regression models, the process independent variables "treatment time" (exerting a positive effect) and "initial COD content" (exerting a negative effect) played more significant roles in surfactant photodegradation than the process variable "initial H(2)O(2) concentration" under the studied experimental conditions.