Microcrack generation and its healing in the oxide scale formed on Fe-Cr alloys

Fe -base alloys containing 5, 10, and 20 wt. % Cr were oxidized in a stream of O₂ at 750 and 900°C up to 264 hr. A sulfur decoration method was applied to detect the cracks generated in the scale during oxidation. This method revealed frequent crack generation and its healing in the scale. In the case of low-Cr alloys, the cracks are filled up with newly formed Fe-rich oxide but may be regenerated during further oxidation. Cracks are generated in the scale on an Fe-20Cr alloy also, although this alloy is not so severely attacked because of rapid healing.     

A new refining process for iron oxide using iron ore and its application to hard ferrites

Kawasaki Steel Corporation and Kawatetsu Mining Co., Ltd. have developed a new refining process to extract iron oxide from iron ore to meet the increase in demand for iron oxide for high- grade hard ferrites. This article discusses the quality of iron oxides and the characteristics of the hard ferrite magnets produced from them.     

Repeatedly foldable AMOLED display

In this study, a 5.9‐inch foldable active‐matrix organic light emitting diode (AMOLED) display was developed. A folding test was performed repeatedly. The display survived the folding test (100,000 folds) with a curvature radius of 2 mm. To protect an organic light emitting diode (OLED) against moisture, inorganic passivation layers are provided on the upper and lower sides of the flexible display. Using our transfer technology, high density passivation layers can be obtained. The measured water vapor transmission rate of the layer is 7 × 10^?6 g/m²?day or less, which improves OLED reliability. With these techniques, we have developed a book‐type display, which is repeatedly foldable like a book, and a tri‐fold display including a display area, which is foldable in three.     

Rapid consolidation of powdered materials by induction hot pressing

A rapid hot press system in which the heat is supplied by RF induction to rapidly consolidate thermoelectric materials is described. Use of RF induction heating enables rapid heating and consolidation of powdered materials over a wide temperature range. Such rapid consolidation in nanomaterials is typically performed by spark plasma sintering (SPS) which can be much more expensive. Details of the system design, instrumentation, and performance using a thermoelectric material as an example are reported. The Seebeck coefficient, electrical resistivity, and thermal diffusivity of thermoelectric PbTe material pressed at an optimized temperature and time in this system are shown to agree with material consolidated under typical consolidation parameters.     

HD/SHD still image database system and image distribution in broadband network applications

This paper focuses on a practical design for an efficient scalable image database and retrieval system over broadband networks. It describes a concrete solution for the implementation of HD/SHD (high-definition/super-high-definition) still image retrieval services which can be used in different applications. The structure of the complete system, consisting of a directory server, an image server, and MMI (man-machine interface) devices, has been presented, detailing each element and their corresponding functions. The desired HD/SHD image is displayed on the HD-PDP (plasma display panel) with the aid of image matching. The proposed system generates image index automatically, eliminating special skills in preparing index images and crucially reducing the processing time (from 35 min to 110 s), and does not use keywords. It has been also shown that these indices can be used for quite accurate image retrieval, i.e., the system provides high precision rates (currently up to 98%) to the user, eliminating troubles encountered in the image retrieval operations due to limitation on the user’s age, culture, knowledge, and languages.The broadband IP networks currently have a number of issues from the viewpoint of practical system operations, and so the requirements and issues needed for the networks are discussed from the viewpoint of in-service performance, differentiation among different types of services, secure connections, and so on, focusing on handling of HD/SHD still images.     

Negative emotion recognition using multimodal physiological signals for advanced driver assistance systems

Artificial Life and Robotics - Recent advanced driver assistance systems’ (ADASs) control cars to avoid accidents, but few of them consider driver’s comfort. To realize comfortable...     

Patterning of Discotic Liquid Crystals with Tunable Molecular Orientation for Electronic Applications

The large‐area formation of functional micropatterns with liquid crystals is of great significance for diversified applications in interdisciplinary fields. Meanwhile, the control of molecular alignment in the patterns is fundamental and prerequisite for the adequate exploitation of their photoelectric properties. However, it would be extremely complicated and challenging for discotic liquid crystals (DLCs) to achieve the goal, because they are insensitive to external fields and surface chemistry. Herein, a simple method of patterning and aligning DLCs on flat substrates is disclosed through precise control of the formation and dewetting of the capillary liquid bridges, within which the DLC molecules are confined. Large‐area uniform alignment occurs spontaneously due to directional shearing force when the solvent is slowly evaporated and programmable patterns could be directly generated on desired substrates. Moreover, the in‐plane column direction of DLCs is tunable by slightly tailoring their chemical structures which changes their self‐assembly behaviors in liquid bridges. The patterned DLCs show molecular orientation–dependent charge transport properties and are promising for templating self‐assembly of other materials. The study provides a facile method for manipulation of the macroscopic patterns and microscopic molecular orientation which opens up new opportunities for electronic applications of DLCs.     

Fetal heart rate patterns in postasphyxiated fetal lambs with brain damage

OBJECTIVE: We previously showed that in asphyxiated fetal lambs the duration of hypotension correlated well with the severity of histologic damage to the brain, whereas the duration of bradycardia did not. This study compares fetal heart rate patterns with the degree of histologic damage to the brain. STUDY DESIGN: Twelve chronically instrumented near-term fetal lambs were subjected to asphyxia by umbilical cord occlusion until fetal arterial pH was <6. 9 and base excess was <-20 mEq/L. An additional 4 fetuses served as sham-asphyxia controls. Fetal heart rate (from electrocardiogram), arterial blood pressure, fetal breathing movements, and electrocorticogram were continuously monitored before, during, and for 72 hours after asphyxia. Fetal brain histologic features were categorized as mild (group 1, n = 5), moderate (group 2, n = 4), and severe (group 3, n = 3). Long-term fetal heart rate variability expressed as amplitude range was assessed visually every 5 minutes from 30 minutes before asphyxia until 2 hours of recovery and at 6, 12, 24, 48, and 72 hours of recovery. RESULTS: Long-term fetal heart rate variability amplitude decreased from 32 +/- 17 beats/min (mean +/- SEM) preocclusion to 4 +/- 13 beats/min at the end of occlusion (P <.001) without significant differences among the 3 groups. During 10 to 45 minutes of recovery, the long-term variability of group 1 was significantly greater than that of groups 2 and 3. At 24 to 72 hours of recovery, the long-term variability of groups 1 and 2 was significantly higher than that of group 3, which was almost 0. The "checkmark" and sinusoidal fetal heart rate patterns were observed during the recovery period in groups 2 and 3. CONCLUSIONS: Decreased long-term fetal heart rate variability and the "checkmark" and sinusoidal fetal heart rate patterns were indicators of the severity of asphyxial histologic damage in the fetal brain.     

Crossover from 3D to 2D metallic conduction in Sr2RuO4

We have investigated the normal-state conduction of superconducting Sr₂RuO₄ (T_c 1K), which is isostructural to La_2–xSr_xCuO₄. The resistivity of single crystals shows a crossover at T_M130K from 3D metallic conduction at lower temperatures to 2D one at higher temperatures. Concerning the temperature dependence of the out-of-plane resistivity, we present a systematic interpretation based on competition between the life time of the quasiparticles and the time for the quasiparticles to travel between the adjacent RuO₂ planes.     

NMR study of quaternary superconductor RM2B2C (R = Y,La, Th,and M = Ni,Pd, Pt)

¹⁹⁵Pt-,¹³⁹La- and¹¹B-NMR have been investigated in quaternary RM₂B₂C (R=Y, La, Th and M=Ni, Pd, Pt). The electric quadrupole frequency of¹³⁹La changes more than 5 times in magnitude from M=Ni to Pt, indicating that the hybridization of La-5d and d-electrons of M-element changes largely. The analysis of¹¹B and¹³⁹La spectra shows also the large change of the magnetic anisotropy with R and M element, i.e., _{II c}>_{II ab} in LaNi₂B₂C, but _{II c}>_{II ab} YNi₂B₂C.The data of T₁T and K of¹⁹⁵Pt and¹¹B are consistent with the band effects and with no evidence of strong antiferromagnetic correlation effects.