Effect of Newtonian Heating and Thermal Radiation on Heat and Mass Transfer of Nanofluids over a Stretching Sheet in Porous Media

Laminar boundary layer slip flow from a stretching surface in a nanofluid‐saturated homogenous, isotropic porous medium is studied numerically. A Newtonian heating boundary condition in the presence of thermal radiation is incorporated and a Darcy model utilized for the porous medium. The model used for the nanofluids include the effects of Brownian motion and thermophoresis. A group theoretical analysis is conducted to generate similarity transformations. The governing transport equations are nondimensionalized and rendered into a set of coupled similarity ordinary differential equations using similarity transformations. The transformed equations are then solved using the Runge–Kutta–Fehlberg fourth‐fifth order numerical method with shooting technique. It is shown that the physical quantities of interest depend on a number of parameters. The results are presented in tabular and graphical forms. Comparison of the present numerical solutions with published work shows very good agreement. The study finds applications in high‐temperature nanotechnological materials processing.     

Silver Schottky diodes on Kelvin,AES and LEED characterized (100)surfaces of GaAs cleaned by ion bombardment

Schottky contacts were produced by silver evaporation on GaAs surfaces cleaned by ion bombardment. The samples work function were measured before and after metal deposition with the Kelvin method in an experimental set up which allowed a topographical study and direct comparison between n and p types. Surfaces were controlled by AES and LEED. It was found that the Fermi level of all the surfaces was pinned in the midgap range and so there was, on both n and p types, an important surface barrier qV_s whose value did not strongly depend on the surface preparations we used. The diodes we obtained also presented an important barrier φ_B for both n and p types. So it was deduced that diode barriers corresponded to those that were created by surface states and that metal deposition did not noticeably modify these states. On the other hand, surface preparations played an important role in the electrical performances of the diodes. It was deduced then that ion bombardment deteriorated the first atomic layers of the semiconductor.     

Identification of Stochastic Multicompartmental Models in Tracer Kinetics Experiments

Two efficient algorithms are described for the estimation of dynamic parameters in a tracer kinetic experiment, when a stochastic multicompartmental model is utilized. The first approach is based on the sensitivity method, where the error between the model output and the system output is minimized. Sensitivity functions are calculated and model outputs are simulated by the algorithm at each iteration in order to estimate the optimal values of the model parameters. The concept of a whitening filter is used in the second method to convert the colored output error into a white sequence: the algorithm minimizes the estimated variance of the filtered sequence. Tests performed using simulated as well as real data confirm the effectiveness of both the techniques.     

The TeO2-Na2O System: Thermal Behavior,Structural Properties,and Phase Equilibria

Thermal behavior, structural properties, and phase equilibria of the (100−x)TeO₂-xNa₂O system were studied in the 5 ≤ x ≤ 50 mol% composition range. Investigation of glass formation behavior in the binary system was realized, and the glass formation range was determined as 7.5 ≤ x ≤ 40 mol%. Differential thermal analysis (DTA) and Fourier transform infrared (FTIR) spectroscopy techniques were used for thermal and structural characterization of the glasses. Influence of Na₂O content on glass transition temperature (T_g), glass stability (∆T), density (ρ), molar volume (V_M), oxygen molar volume (V_O), and oxygen packing density (OPD) values of sodium tellurite glasses was evaluated considering the structural transformations in the glass network. For the phase equilibria studies, DTA, X-ray diffraction (XRD), and scanning electron microscopy/energy dispersive X-ray (SEM/EDS) techniques were utilized to characterize the heat-treated samples. According to the phase equilibria studies, three eutectic regions were detected in the 0 < x < 50 mol% composition range of the (100−x)TeO₂-xNa₂O system. A new invariant endothermic reaction was detected for the compositions between 40 ≤ x ≤ 45 mol%. Na₂O.8TeO₂ (11.11 mol% Na₂O) compound that was claimed to exist in the binary system in the literature was found to be the metastable δ-TeO₂ phase.     

Exploiting the Plackett–Burman design to examine the formulation effect on curing characteristics of oil palm ash-filled acrylonitrile butadiene rubber compounds

The present paper is focused on exploiting Plackett–Burman design to examine the formulation effect of various chemical components content on the curing characteristics of oil palm ash (OPA)-filled acrylonitrile butadiene rubber (NBR) compound. The filled-NBR compound was prepared by conventional laboratory-sized two roll mill and cured using sulfuric system. Six independent variables such as content of zinc oxide, stearic acid, N-isopropyl-N′-phenyl-p-phenylenediamine, N-cyclohexyl-2-benzothiazole sulfenamide (CBS), sulfur, and even OPA filler were carried out to screen their significant effect on the curing characteristics of NBR compound. The scorch time, optimal cure time, minimum torque, and maximum torque were selected as a response. Results showed that the scorch time and the optimal cure time were significantly affected by CBS, whereas the minimum torque and maximum torque were significantly affected by OPA and sulfur, respectively, within the studied range. Among the chemical components under study, zinc oxide and stearic acid had the least effect on the curing properties of NBR compound. Analysis of variances for all factorial models demonstrated that the model was significant with P value <0.05 while the regularity (R ²) of all models was greater than 0.9. Lastly, the optimal chemical concentrations were predicted to acquire the optimal condition of the curing system for filled-NBR compound.     

The Plasminogen–Activator Plasmin System in Physiological and Pathophysiological Angiogenesis

Angiogenesis is a process associated with the migration and proliferation of endothelial cells (EC) to form new blood vessels. It is involved in various physiological and pathophysiological conditions and is controlled by a wide range of proangiogenic and antiangiogenic molecules. The plasminogen activator–plasmin system plays a major role in the extracellular matrix remodeling process necessary for angiogenesis. Urokinase/tissue-type plasminogen activators (uPA/tPA) convert plasminogen into the active enzyme plasmin, which in turn activates matrix metalloproteinases and degrades the extracellular matrix releasing growth factors and proangiogenic molecules such as the vascular endothelial growth factor (VEGF-A). The plasminogen activator inhibitor-1 (PAI-1) is the main inhibitor of uPA and tPA, thereby an inhibitor of pericellular proteolysis and intravascular fibrinolysis, respectively. Paradoxically, PAI-1, which is expressed by EC during angiogenesis, is elevated in several cancers and is found to promote angiogenesis by regulating plasmin-mediated proteolysis and by promoting cellular migration through vitronectin. The urokinase-type plasminogen activator receptor (uPAR) also induces EC cellular migration during angiogenesis via interacting with signaling partners. Understanding the molecular functions of the plasminogen activator plasmin system and targeting angiogenesis via blocking serine proteases or their interactions with other molecules is one of the major therapeutic strategies scientists have been attracted to in controlling tumor growth and other pathological conditions characterized by neovascularization.     

Study of the Blast Wave Parameters from Small Scale Explosions

Although the science of blast overpressure is well understood there are major difficulties in obtaining accurate values for peak overpressure, positive duration, and positive impulse. These parameters are required to assess damage potential of blast overpressures. This paper describes the problems associated with such measurements and how the problems can be overcome by the use of known analytical techniques based on the modified Friedlander equation. Other methods used include curve smoothing of the pressure-time history and integration to obtain impulse values through which the curve decay parameter can be found. Several different analytical methods are compared. The experiments have been carried out on small charges (200 g and 400 g) and the results obtained analysed to assess far-field distances for such charges. This has been achieved by comparing peak overpressure values with the scaled distance.     

Modification of Silica Nanoparticles with Cysteine or Methionine Amino Acids for the Removal of Uranium (VI) from Aqueous Solution

Silicon - Silica nanoparticles (SiO2-NPs), modified silica nanoparticles with cysteine (SiO2-Cys) or methionine (SiO2-Meth) were used for sorption of uranium (VI) ion from aqueous solution. Silica...     

Hypocholesterolaemic effect of yoghurt containing Bifidobacterium pseudocatenulatum G4 or Bifidobacterium longum BB536

The effect of a yoghurt supplement containing Bifidobacterium pseudocatenulatum G4 or Bifidobacterium longum BB536 on plasma lipids, lipid peroxidation and the faecal excretion of bile acids was examined in rats fed a cholesterol-enriched diet. After 8 weeks, the rats in the positive control (PC) group who were fed the cholesterol-enriched diet showed significant increases in plasma total cholesterol (TC), low-density lipoprotein (LDL) cholesterol, and malondialdehyde (MDA). However, groups fed a cholesterol-enriched diet supplemented with yoghurt containing B. pseudocatenulatum G4 or B. longum BB536 had significantly lower plasma TC, LDL-C, very-low-density lipoprotein (VLDL) cholesterol, and MDA than had the PC group after 8 weeks of treatment. In addition, faecal excretion of bile acids was markedly increased in the rats fed the yoghurt containing B. pseudocatenulatum G4 or B. longum BB536 as compared to the PC and NC groups.     

Mechanism of boron tribromide electroreduction

This study was carried out to investigate the electrochemical behavior of boron tribromide in dimethlyformamide. The reduction of the compound was found to follow a CE mechanism. The kinetic parameters and the diffusion coefficient were calculated by the use of ultramicrodisc electrodes and chronoamperometry. The number of electrons transferred was found to be 2 by rotating disc and ultramicro disc electrodes and 3 by coulometry. These results are in good accordance with those obtained from molten boron salts. This study is important in regard to electrochemical boronizing at low temperatures.