Kinetic Monte-Carlo simulation of network formation

Summary the simulation described in Part I was applied to random step polyaddition of a trifunctional monomer and the results were compared with exact solution for an infinite system. The gel point conversions, the weight-average degree of polymerization before (P _w) and beyond (P _w,sol) the gel point, the sol fraction and the cycle rank were used for comparison. The best way for detection of the gel point conversion is the extrapolation of the gel fraction, w _g, to w _g=0. The largest fluctuations are exhibited by P _w and P _w,sol. To get results closer to the exact ones, one can repeat several experiments with smaller number of units or increase the number of units, the former way being somewhat more economical. Typical orders of magnitude used were 10⁷ monomeric units.     

Short-circuit power driven gate sizing technique for reducing powerdissipation

One major challenge in low-power technology is how to reduce overall power dissipation of a given subsystem without impacting its performance. In this paper we present a technique that can be applied to the nonspeed-critical nets in a circuit in order to reduce overall power dissipation. This technique involves a study of short-circuit power dissipation as a function of input signal slews and output load conditions, to aid in making a judicious choice of drive strengths for various gates in a circuit. The resulting low-power solution does not degrade the original performance and yields a circuit which occupies less silicon area. The technique described here can be incorporated into any power optimization or synthesis tool. Lastly, we present the savings in power and area for a 32-b carry lookahead adder which was designed using the technique described here     

K- and Q-bands CMOS frequency sources with X-band quadrature VCO

Fully integrated 10-, 20-, and 40-GHz frequency sources are presented, which are implemented with a 0.18-/spl mu/m CMOS process. A 10-GHz quadrature voltage-controlled oscillator (QVCO) is designed to have output with a low dc level, which can be effectively followed by a frequency multiplier. The proposed multipliers generate signals of 20 and 40 GHz using the harmonics of the QVCO. To have more harmonic power, a frequency doubler with pinchoff clipping is used without any buffers or dc-level shifters. The QVCO has a low phase noise of -118.67 dBc/Hz at a 1-MHz offset frequency with a 1.8-V power supply. The transistor size effect on phase noise is investigated. The frequency doubler has a low phase noise of -111.67 dBc/Hz at a 1-MHz offset frequency is measured, which is 7 dB higher than a phase noise of the QVCO. The doubler can be tuned between 19.8-22 GHz and the output is -6.83 dBm. A fourth-order frequency multiplier, which is used to obtain 40-GHz outputs, shows a phase noise of -102.0 dBc/Hz at 1-MHz offset frequency with the output power of -18.0 dBm. A large tuning range of 39.3-43.67 GHz (10%) is observed.     

Diagnosis of tapping operations using an AI approach

On-line diagnosis of the machining operations is essential because it can prevent potential problems caused by abnormal conditions. So far, little research has been done for the on-line diagnosis of tapping operations. However, tapping is a very important machining operation. And the on-line diagnosis is essential. In this work, an artificial neural network was utilized for the diagnosis of the tapping operation. The input vector for the neural network is obtained by processing the signals of the thrust, torque, and lateral forces during the tapping operations. A total of ten indices were used in the input layer of the network. The output of the artificial neural network provides the tapping states. Five different tapping states were investigated: normal operation, tap wear, misalignment, oversize hole, and undersize hole. The weights and thresholds of the artificial neural network can be modified by the generalized delta rule. Experimental results showed that diagnosis of tapping operations through an artificial neural network can reach a success rate of over 95%.     

Distributed Multirobot Exploration and Mapping

Efficient exploration of unknown environments is a fundamental problem in mobile robotics. We present an approach to distributed multirobot mapping and exploration. Our system enables teams of robots to efficiently explore environments from different, unknown locations. In order to ensure consistency when combining their data into shared maps, the robots actively seek to verify their relative locations. Using shared maps, they coordinate their exploration strategies to maximize the efficiency of exploration. This system was evaluated under extremely realistic real-world conditions. An outside evaluation team found the system to be highly efficient and robust. The maps generated by our approach are consistently more accurate than those generated by manually measuring the locations and extensions of rooms and objects.     

Graft copolymerization of different mixtures of acrylic monomers on amylopectin. Swelling behavior

Hydroxylic and nonhydroxylic acrylates—methyl acrylate (MA), ethyl acrylate (EA), butylacrylate (BA), hydroxypropyl methacrylate (HPMA), ethylenglycol dimethacrylate (EGDMA), and mixtures of HPMA–MA, HPMA–EA, HPMA–BA in a 50/50 feed composition—were grafted onto amylopectin with different amounts of crosslinking agent, EGDMA. Percent of total conversion, percent crude grafting, and influence of pH in water content were studied. In this sense it was only at pH 10 when a real variation in the water content could be seen. It was also proved that the highest values were obtained when one of the comonomers was EGDMA with a 34 mol% of the initial feed composition. © 1994 John Wiley & Sons, Inc.     

Reliability of a k-out-of-n: G system with common-mode outages

This paper presents the model of a k-out-of-n: G system with common mode outages. The objective is to analytically derive the mean operating mode between failures for a non-repairable component system. The average system failure time and the system availability are also considered. Then, the model is extended to a system with repairable components and unrestricted repair, in which service times are exponentially distributed.     

Self-Organization of Microlens Arrays Caused by the Spin-Coating-Assisted Hydrophobic Effect

A simple, low-cost, low-temperature, and shape-controllable approach has been demonstrated to fabricate polymer microlens arrays (MLAs). By using microcontact printing of the self-assembled monolayers and then spin coating, the microlenses were able to organize themselves on the patterned glass substrate. High-quality MLAs made of NOA65 prepolymer with lens-diameters of 50, 75, and 100 mum have been fabricated by this method. Lens shapes can be controlled by changing the spin rates of the prepolymer coating. Optical measurements have revealed an excellent light-collecting capability from the fabricated MLAs. It is anticipated that the technique will be ideally suited to low-cost and high-volume production     

Sphere Lower Bound for Rotated Lattice Constellations in Fading Channels

We study the error probability performance of rotated lattice constellations in frequency-flat Nakagami-m block-fading channels. In particular, we use the sphere lower bound on the underlying infinite lattice as a performance benchmark. We show that the sphere lower bound has full diversity. We observe that optimally rotated lattices with largest known minimum product distance perform very close to the lower bound, while the ensemble of random rotations is shown to lack diversity and perform far from it.     

Synthesis and characterization of a novel proton‐exchange membrane for fuel cells operating at high temperatures and low humidities

The synthesis of a p‐toluidine/formaldehyde (PTF) resin was performed, and the effects of the molar ratio of the individual monomers and the polymerization conditions on the structure of the PTF resin were studied. Fourier transform infrared and ¹³C‐NMR spectra were used to characterize the PTF. Wide‐angle X‐ray diffraction patterns revealed the crystalline structures of various PTFs. Polarized optical microscopy revealed that the molar ratio of the monomers had a strong effect on the crystalline morphologies. A longer polymerization time turned out a polymer with a higher intrinsic viscosity and molecular weight, which led to differences in the proton conductivity. All of the PTFs showed a higher proton conductivity than a commercial Nafion membrane at 90–100°C and 0% relative humidity. The proton conductivity of the PTF series could be improved by sulfonation with sulfuric acid and could be maintained after blending with polyurethane. Pure methanol could be used as a fuel source because of the insolubility and nonwetting properties of PTF in methanol to increase the output current density for a PTF membrane electrode assembly. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008