High-rate sulphidogenic fluidised-bed treatment of metal-containing wastewater at high temperature.

The applicability of fluidised-bed reactor (FBR) based sulphate reducing bioprocess was investigated for the treatment of iron containing (40-90 mg/L) acidic wastewater at 65 degrees C. The FBR was inoculated with sulphate-reducing bacteria (SRB) originally enriched from a hot mining environment. Ethanol or acetate was supplemented as carbon and electron source for the SRB. A rapid startup with 99.9, 46 and 29% ethanol, sulphate and acetate removals, in respective order, was observed even after 6 days. Iron was almost completely removed with a rate of 90 mg/L.d. The feed pH was decreased gradually from its initial value of 6 to around 3.7 during 100 days of operation. The wastewater pH of 4.3-4.4 was neutralised by the alkalinity produced in acetate oxidation and the average effluent pH was 7.8 +/- 0.8. Although ethanol removal was complete, acetate accumulated. Later the FBR was fed with acetate only. Although acetate was present in the reactor for 295 days, its oxidation rates did not improve, which may be due to low growth rate and poor attachment ability of acetate oxidising SRB. Hence, the oxidation of acetate is the rate limiting step in the sulphidogenic ethanol oxidation by the thermophilic SRB.     

Diel Vertical Migration of Round Goby Larvae in the Great Lakes

One hypothesis for the transcontinental and intra-Great Lakes basin transfer of round gobies (Neogobius melanostomus) has been that round gobies were pumped into the ballast water of ships. During June 2005 in Lake Erie, we obtained evidence of a vertical migration of round goby larvae, when we collected 167 round goby larvae in surface ichthyoplankton net tows at night and zero during day. These results complemented similar findings from the Muskegon River estuary of Lake Michigan during 2003 and 2004, documenting diel vertical migration for the first time in larval round gobies. We suggest vertical migration behavior may have allowed larval round gobies to be transported to and within the Great Lakes via ballast water and dispersed in the Great Lakes via advection of 6.5–8.5-mm long larvae at the surface. Based on our results, if ballast water was only taken on near the surface during daylight hours from May through September when larval round gobies were present, it would have mitigated the spread of round gobies throughout the Great Lakes.     

Temperature effects on the mass flow rate in the SBI and similar heat‐release rate test equipment

In various medium‐to‐large‐scale fire test equipments like the ISO room corner test (RC), and more recently, the single burning item test (SBI) the mass flow rate measurement of the combustion gases plays a key role in the determination of the heat‐release rate and smoke‐production rate. With the knowledge of the velocity profile and the temperature of the flow, the mass flow rate is obtained by measuring the velocity on the axis of the duct. This is done by means of a bi‐directional probe based on the pitot principle. However, due to the variation of the mean temperature and the temperature gradient in any cross section of the duct, introduced by ever changing combustion gas temperatures, the velocity nor the density profile are constant in time. This paper examines the resulting uncertainty on the mass flow rate. Copyright © 2006 John Wiley & Sons, Ltd.     

Breakdown behavior of GaAs/AlGaAs HBTs

Avalanche breakdown behavior at the collector junction of the GaAs/AlGaAs HBT (heterojunction bipolar transistor) has been studied. Junction breakdown characteristics displaying hard breakdown, soft breakdown, and negative resistance breakdown behavior were observed and are interpreted by analysis of localized microplasma effects, uniform microplasma-free behavior, and associated current gain measurements. Light emission from the collector-base junction of the GaAs/AlGaAs HBT was observed and used to investigate breakdown uniformity. Using a simple punchthrough breakdown model, the theoretical breakdown curves at different collector doping concentrations and thicknesses were computed and found to be in agreement with maximum breakdown voltages measured from devices displaying the most uniform junction breakdown. The serious current gain degradation of GaAs/AlGaAs HBTs at low current densities was analyzed in connection with the measurement of a large collector-emitter breakdown voltage. The unexpected functional relationship between the collector-emitter breakdown voltage and collector-base breakdown voltage is explained by the absence of a hole-feedback effect for devices not exhibiting transistor action     

Protoporphyrin-IX as a Substitute for Nitrite in Cured-Meat Color Production

The iron-free heme derivative protoporphyrin-IX, was added to a cooked emulsified beef product to mimic the typical cured-color obtained with nitrite. Although the pigment was stable and could be recovered from the emulsion it imparted a purple hue as noted by visual observation and Hunterlab color values (L,a,b). The possible implications of this pigment as a meat colorant are discussed.     

Organochlorine Contaminants of Wintering Ducks Foraging on Detroit River Sediments

Organochlorine analysis was performed on carcasses of 13 diving ducks from a 1981 wintering population that foraged on contaminated sediments in the lower Detroit River. Mean total PCB concentrations were 10 mg/kg for seven lesser scaups (Aythya affinis), 11 mg/kg for three greater scaups (A. marila), and 7.6 mg/kg for three goldeneyes (Bucephala clangula). Highest mean levels of other residues were measured for hexachlorobenzene (1.7 mg/kg) in goldeneyes, and transnonachlor (0.33 mg/kg) and 4,4’-DDE (1.3 mg/kg) in greater scaup. Quantitative analysis of 72 PCB congeners also was applied to water, seston, sediment, benthie oligochaetes, and carp from the same site. Principal congeners in most of the samples included some of the more toxic and persistent PCBs. Results of a multivariate analysis indicated that ratios of more conservative to less conservative PCBs did not vary significantly among ducks (α = .05), but differed from those in carp, oligochaetes, and sediment. For the February through March period of fat mobilization, concentrations of total PCB in lipid were inversely correlated with percent lipid (r = 0.76) in ducks. The percentage of conservative PCBs increased slightly. The distribution and partitioning of organochlorines, including toxic PCB congeners, varied considerably within this water column-sediment-fauna ecosystem. Estimates of toxic exposure based on total PCB values may be unreliable.     

Muscle-ligament interactions at the knee during walking.

A two-dimensional mathematical model of the knee is used with gait analysis to calculate muscle, cruciate ligament and tibio-femoral contact forces developed at the knee during normal level walking. Ten normal adult subjects--four females and six males--participated. The knee model is based upon a four-bar linkage comprising the femur, tibia and two cruciate ligaments. It takes account of the rolling and sliding of the femur on the tibia during flexion/extension and the changes in direction of the ligaments and muscle tendons. We considered forces transmitted by six elements: quadriceps, hamstrings, gastrocnemius, anterior and posterior cruciate ligaments, and tibio-femoral contact. The equations of mechanics can be used to determine the absolute values of only three of the knee forces simultaneously, so that twenty limiting solutions of three of the six forces were considered. A limiting solution was rejected if any of the three forces were negative, corresponding to compressive muscle or ligament forces, or tensile contact forces. These constraints always reduced and at times removed the redundancy of the knee structures. The high incidence of predicted single muscle activity, supported by electromyography, suggested that the ligaments play a significant role in load transmission during gait. The temporal patterns of muscle and ligament activity and ligament force magnitudes were sensitive to the choice of model parameters. The analysis showed that each of four possible minimum principles of muscle selection--minimal muscle force, muscle stress, ligament force and contact force--was unlikely to be valid throughout the walking cycle.     

Comparative studies on the enzymatic absorption of protein hydrolysates in the small intestine of the rat. 3. The absorption trypsins thermatatic and trypsin-thermatatic hydrolysates of a fava bean protein isolate compared to an equimolar mixture of free amino acids

Tryptic, thermitatic, and tryptic-thermitatic Faba bean protein hydrolyzates as well as their equimolar mixture of amino acids were perfused through proximal and distal parts of the intestine (10 cm length) of non-narcotized rats. The total amino-acid concentration of the perfused solution was 50 mM. The absorption of nitrogen and total amino acids from the tryptic and tryptic-thermitatic hydrolyzates was lower than that from the amino-acid mixture, the absorption from the thermitatic hydrolyzate was in accordance with that from the amino-acid mixture. The absorption pattern of the amino acids which preferably undergo a peptidic absorption is similar with the three hydrolyzates: in the proximal intestinal part this concerns glutamic acid and serine, in the distal intestinal part--methionine, alanine, glycin, and serine. The absorption pattern of the amino acids is different between the three hydrolyzates and the amino-acid mixture. Between the absorption pattern of the amino acids from the three hydrolyzates little differences were evident only in the proximal intestinal part. The coefficients of variation of the tryptic-thermitatic hydrolyzates are in accordance with those of the amino-acid mixture, whereas that of the thermitatic hydrolyzates is significantly lower. In the distal intestinal part all supplied forms are more rapidly absorbed than in the proximal part of the intestine.     

Magnetic induction micromachine-part I: Design and analysis

Most microscale electric and magnetic machines studied in the last decade lack the power density to support many practical applications. This paper introduces a design for a magnetic induction machine that offers power densities in excess of 200 MW/m/sup 3/ and efficiencies of up to 50%, while providing more than 10 W of mechanical power. This is a substantial performance increase in MEMS electromagnetic machines studied to date.