Inertia-friction welding of SiC-reinforced 8009 aluminium

Inertia-drive friction welding (IFRW) of an 8009 Al alloy (Al-8.5 Fe-1.7 Si-1.3 V, wt%) reinforced with 11 volume per cent SiC particles (8009/SiC/11_p) has been investigated. Inertia-drive friction welds were made with constant energy at two levels of axial force. The microstructures of the base material and the welds were characterized using optical and scanning electron microscopy, while the mechanical properties were evaluated using microhardness and tensile testing. Examination of weld sections revealed that the hot deformation experienced during welding produced a homogenized microstructure with a uniform distribution of SiC particles along the bond line. No evidence of a chemical reaction between the SiC and the matrix was found in any of the welds, but cracking of some of the larger SiC particles was observed in the base material as well as in the IFR welds. The average microhardness of the various heat-and-deformation affected zones (HDZs) of the welds did not vary greatly from that of the base material, and no weld induced weak regions were discerned. The room-temperature (RT) tensile strength of the IFR welds exceeded 90 per cent of the base material. The weld tensile specimens failed at the outer edge of the HDZ for all of the welds tested. The fracture surface of the 8009 matrix of tensile samples for both the base material and the welds exhibited a dimpled appearance indicating a ductile failure, while fracture through the SiC appeared to occur in a brittle fashion. IFRW has proven effective in joining 8009/SiC/11_p with little loss in RT hardness and tensile properties.     

A semi-analytic boundary element method for parabolic problems

A new semi-analytic solution method is proposed for solving linear parabolic problems using the boundary element method. This method constructs a solution as an eigenfunction expansion using separation of variables. The eigenfunctions are determined using the dual reciprocity boundary element method. This separation of variables-dual reciprocity method (SOV-DRM) allows a solution to be determined without requiring either time-stepping or domain discretisation. The accuracy and computational efficiency of the SOV-DRM is found to improve as time increases. These properties make the SOV-DRM an attractive technique for solving parabolic problems.     

Evaluation of in vitro stability of large unilamellar liposomes coated with a modified polysaccharide (O-palmitoylpullulan)

Aiming at encapsulation of a hydrosoluble drug, large unilamellar liposomes (LUV) of egg phosphatidylcholine (PC) were coated with a natural polysaccharide derivative, O-palmitoylpullulan (OPP), and its in vitro stability evaluated using fluorescent probes. This coating (in OPP/PC weight ratio of 3) improved significantly the in vitro stability of LUV by decreasing both the permeability and fluidity of the liposomal membrane.This paper was accepted for publication after the 1995 Conference of the European Society of Biomaterials, Oporto, Portugal, 10–13 September.     

Adhesion, growth and differentiation of human bone marrow stromal cells on non-porous calcium carbonate and plastic substrata: effects of dexamethasone and 1,25dihydroxyvitamin D3

Bone marrow contains stromal fibroblastic stem cells which have the potential to differentiate into bone-forming cells. Therefore addition of bone marrow to porous bone substitutes such as coral or coralline hydroxyapatite may be expected to enhance bone ingrowth into these implants. This study was designed to evaluate the possibility of growing human bone marrow stromal fibroblastic cells (HBMC) on a calcium carbonate substrate. For this purpose, HBMC were cultured for 20 days on plastic or calcium carbonate and cell adhesion, growth, and differentiation were studied. It was concluded that calcium carbonate is a highly compatible material for the growth of HBMC. Cells were capable of adhesion within 30 min and were spread within 24 h on this material. However, plating efficiency was decreased in comparison to plastic. Population doubling times (PDT) showed that they were similar when the cells were grown on plastic or calcium carbonate as substratum (PDT=4, 5.5 days). Early protein synthesis included collagen I, collagen III, osteopontin and bone sialoprotein. To induce differentiation of HBMC on plastic and calcium carbonate the influence of dexamethasone (Dex) and 1,25dihydroxyvitamin D3 (1,25(OH)₂D₃) on alkaline phosphatase (ALP) expression was studied. Basic ALP activity was similar when cells were grown on plastic or calcium carbonate. However, Dex and 1,25(OH)₂D₃ increased ALP activity of HBMC which could be driven best towards osteogenesis in the presence of Dex and 1,25(OH)₂D₃.     

Characterization of titanium alloy implant surfaces with improved dissolution resistance

The present work sets out to investigate the structure and chemistry of surface treated oxides (either aged in boiling water or air-heated) with improved dissolution resistance compared to conventionally passivated surfaces. X-ray photoelectron spectroscopy (XPS) has demonstrated a significant reduction in oxidized aluminium associated with an ageing-based surface treatment. Angle-dependent XPS has revealed an increase in amphoteric-OH surface sites for the thermal treatments. Atomic force microscopy (AFM) investigation suggests that these sites play a role in the improved proteinadsorption properties of these surfaces. These observations form the basis of a model which describes the influence of surface oxide on the kinetics of metal ion dissolution.     

Sterilization of heparinized Cuprophan hemodialysis membranes

The effects of sterilization of dry heparinized Cuprophan hemodialysis membranes by means of ethylene oxide (EtO) exposure, gamma irradiation, or steam on the anticoagulant activity and chemical characteristics of immobilized heparin and the permeability of the membrane were investigated. Sterilization did not result in a release of heparin or heparin fragments from heparinized Cuprophan. Sterilization of heparinized Cuprophan by means of EtO exposure and gamma irradiation induced a slight, insignificant decrease of the anticoagulant activity. In contrast, steam-sterilized heparinized Cuprophan showed a higher anticoagulant activity than unsterilized heparinized Cuprophan, which was most likely caused by cleavage of some of the covalent bonds between heparin and Cupropha. The effects of sterilization on the permeability of unmodified Cuprophan and heparinized Cuprophan were compared. The permeability of unmodified Cuprophan for vitamin B₁₂ (Vit B₁₂) and sulfobromophthalein (SBP) was reduced by 20–35% after EtO exposure and gamma irradiation and was reduced by 90–95% after steam sterilization. The water permeability of unmodified Cuprophan remained the same after EtO exposure and gamma irradiation but also dramatically reduced after steam sterilization. These reductions were ascribed to the collapse of pores of the membrane. The permeability of heparinized Cuprophan was not affected by EtO exposure and gamma irradiation but dramatically reduced after steam sterilization, although to a lesser extent than in the case of unmodified Cuprophan. Apparently, the presence of immobilized heparin (partially) prevented the collapse of pores during sterilization. Gamma irradiation was recommended as the preferred method of sterilization for heparinized Cuprophan.     

Reconstitution of CD3 zeta coupling to calcium mobilization via genetic complementation

The integrity of the T cell receptor complex (CD3-TCR) transduction machinery is central to T cell development and to T cell effector function. Molecular dissection of the multimeric CD3-TCR complex revealed that at least two associated polypeptides, CD3 zeta and CD3 epsilon, autonomously couple antigenic recognition event to early and late events of the intracytoplasmic activation cascade. A 18-amino acid motif based on a tandem YXXL stretch, the activation receptor homology sequence 1 (ARH-1) motif, is necessary and sufficient to the transducing properties of both CD3 zeta and CD3 epsilon. Stimulation of chimeric molecules made of ecto- and transmembrane domains of various cell surface proteins and intracytoplasmic domains of CD3 epsilon or CD3 zeta leads to an increase in the intracellular Ca2+ concentration ([Ca2+]i) in Jurkat cells. We describe here that a similar CD25/zeta chimeric molecule was unable to induce a detectable [Ca2+]i rise upon CD25 cross-linking once expressed in the murine thymoma BW-. A Ca2+ influx could, however, be triggered in BW- cells by thapsigargin, i.e. following depletion of Ca2+ stores. Somatic cell hybrids made from BW- and either thymocytes or mature lymph node T cells reconstituted the coupling of CD3 zeta to the Ca2+ signal via an ARH-1 motif-dependent pathway. However, pervanadate-induced Ca2+ mobilization, a phenomenon attributed to tyrosine phosphorylation, was impaired in BW-cells and reconstituted in hybridomas. In contrast to the Ca2+ response, IL-2 production was induced in both BW- and hybrids cells, which questions the functional relevance of [Ca2+]i augmentation in T cell activation. In conclusion, the properties of the BW- thymoma, which define a novel group of CD3 zeta transduction cell mutants, as well as its complementation by somatic cell fusion demonstrate that this cell line represents a useful model to dissect the signaling pathway that couples CD3 zeta to Ca2+ mobilization by genetic reconstitution.     

INSTRUMENTATION FOR FLOW PROPERTIES OF GAS-SOLID SUSPENSIONS AND RECENT ADVANCES

Measurements of local velocity, density, and mass flow of phases of a gas-solid suspension are needed in determining transport properties, validating theoretical predictions, and formulating design procedures. Most of the available instruments are based on time averages or fluctuations with time. Primary standard for direct measurement of density of a phase such as solid particles is being developed. A laser phase Doppler device, within certain restrictions, may give local instantaneous density, while other optical methods and neutron beam remain secondary standards based on mass flow calibrations. An overall review including recent results has been made on both intrusive and non-intrusive instruments; their limitations and future possibilities are outlined and discussed. The limitations of the traditional approach utilizing the triangular relation between local averages of mass flow, velocity, and density of particles for the determination of flow properties, and higher order correlations are demonstrated.     

Personal communications networks bridging the gap between cellularand cordless phones

Today's cellular radiotelephone systems currently serve some 12 million subscribers but at average costs of $70/month for service, cellular remains a business, not a consumer, service. On the other hand, cordless phones are already a consumer product in over 40% of US households and annual sales of new cordless phones are already greater than sales of regular corded phones. Personal Communications Networks (PCN) providing Personal Communications Services (PCS) are designed to bridge the gap between expensive public cellular and private cordless services. In this paper we explore PCN/PCS topics including: a definition of the service, identification of the underlying technologies, and discussion of tradeoffs between the technologies     

Optimal discrimination and classification of neuronal actionpotential waveforms from multiunit, multichannel recordings usingsoftware-based linear filters

Describes advanced protocols for the discrimination and classification of neuronal spike waveforms within multichannel electrophysiological recordings. The programs are capable of detecting and classifying the spikes from multiple, simultaneously active neurons, even in situations where there is a high degree of spike waveform superposition on the recording channels. The protocols are based on the derivation of an optimal linear filter for each individual neuron. Each filter is tuned to selectively respond to the spike waveform generated by the corresponding neuron, and to attenuate noise and the spike waveforms from all other neurons. The protocol is essentially an extension of earlier work (S. Andreassen et al., 1979; W.M. Roberts and D.K. Hartline, 1975; R.B. Stein et al., 1979). However, the protocols extend the power and utility of the original implementations in two significant respects. First, a general single-pass automatic template estimation algorithm was derived and implemented. Second, the filters were implemented within a software environment providing a greatly enhanced functional organization and user interface. The utility of the analysis approach was demonstrated on samples of multiunit electrophysiological recordings from the cricket abdominal nerve cord