Electrical characterization of megabit DRAMs. 11. Internal testing

For pt.I. see ibid., vol.8, no.3, p.36-43 (1991). Contactless tools for testing inside dynamic RAMs, including hot-spot detection, emission microscopy, scanning laser microscopy, and submicron electron beam testing, are described. Basic principles and experimental setups are described. The utility of the techniques is assessed     

Empirical equations for the perforation of mild steel plates

The experimental results for the perforation energy of mild steel plate struck by flat-ended, non-deforming, cylindrical penetrators have been correlated using the principles of dimensional analysis. A correlation is presented for long penetrators. It is shown that for short penetrators a different response of the target is observed and that, at present, there are insufficient published data to produce a unifying correlation.     

A series active power filter based on a sinusoidalcurrent-controlled voltage-source inverter

A series active power filter working as a sinusoidal current source, in-phase with the mains voltage, has been developed and tested. The amplitude of the fundamental current in the series filter is controlled through the error signal generated between the load voltage and a pre-established reference. The control allows an effective correction of power factor, harmonic distortion and load voltage regulation. Compared with previous methods of control developed for series active filters, this method is simpler to implement because it is only required to generate a sinusoidal current, in-phase with the mains voltage, the amplitude of which is controlled through the error in the load voltage. The proposed system has been studied analytically and tested using computer simulations and experiments. In the experiments, it has been verified that the filter keeps the line current almost sinusoidal and in-phase with the line voltage supply. It also responds very quickly under sudden changes in load conditions, reaching its steady-state in about two cycles of the fundamental     

Monte Carlo simulations of homogeneous upconversion in erbium-dopedsilica glasses

Quenching of Er³⁺ ions by homogeneous energy-transfer upconversion in high-concentration erbium-doped silica glasses has been theoretically investigated, The results indicate that at Er³⁺ concentrations of 1.0-2.0·10²⁶ m^-3 or below, the kinetic limit of strong migration is not reached, and hence the widely accepted quadratic upconversion model is not generally valid. Nevertheless, the results offer an explanation of the experimental observations of quadratic upconversion. Furthermore, it has been shown that at a given population inversion, the quenching rate depends on the rate of exchange of the excited Er³⁺ ions by emission and absorption     

Condition assessment of unshielded aged power and control cables byelectrical techniques

Experience with electrical diagnostic and high-potential tests, performed at the terminals of unshielded cables in older nuclear and thermal plants is presented. The three basic types of cable-low- and high-voltage power cables, control cables and instrumentation cables-that are important to the reliable operation of a generating station and large industrial plants are described, and their aging mechanisms are indicated. Dielectric testing of unshielded cables, the effect of grounding, field testing of station cables, and insulation characterization at low frequencies are discussed     

Knowledge, data, and models

The object-oriented approach to integrating knowledge data, and models is examined. Under the object-oriented paradigm, everything is an object, which is itself an encapsulation of data and methods to manipulate and access the data within the object. Thus knowledge, data, and models can be defined as special kinds of objects. Active knowledge/data language (KDL), a functional object-oriented database system is considered, covering the active-KDL-type system and functions, and query-driven simulation     

A probabilistic method for the design of power grounding systems

An improved multivariable, probabilistic method for the safety analysis of power grounding systems is presented. The application of this method is demonstrated in four examples. The first three examples illustrate the practical evaluation of one new and two existing substation grounding grids when the substation is connected to an overhead distribution system. The fourth example ascertains the relative impact of a difference between the S curve of IEC Publication 479 and Dalziel's equation for the allowable body current used in ANSI/IEEE Std 80-1986 on the validity of an exposure model based on the requirements of Std 80. In this example, the statistical data on ground faults have been taken from actual system records. Further possible refinements of the exposure model are discussed     

Comparing the motivations of Spanish and Finnish computer personnel with those of the United States

A survey of perceptions of IS personnel – managers, technical specialists and programmer/analysts – was conducted by the Association for Technical Information in Spain, using the JDS/DP, a modification of the job diagnostic survey instrument. Data were collected on fifteen job variables, related to four motivation aspects: job components, satisfaction levels, need for growth/achievement and goal participation/feedback. The results were compared with those of a similar survey for the same job types in Finland. Results were also compared with the norms developed for computer personnel in the USA. The survey revealed that personnel attracted to the computer field have a high need for growth and a low need for social interaction. It also revealed that the work itself was ranked highest among eleven motivating factors. For both Spain and Finland, the technical specialist job had a mis-match between the job's motivating potential and the employee's need for growth, compared with similar personnel in the USA. By examining the core job dimensions, managers can redesign the job to produce a match between these two major components of motivation.     

The influence of trigger configurations and laminate lay-up on the failure mode of composite crush cylinders

In this paper the results are presented of a test program on the energy absorption of composite cylinders loaded in compression. The influence of the laminate lay-up and of the trigger configuration were determined. Two different failure modes for the different laminates and triggers were observed: a splaying mode and a fragmentation mode. The splaying mode is more efficient in absorbing energy. The failure mode did not change during the crushing process.     

Cable insulation density profile determined from ultrasonicvelocity measurements

Density results obtained on the same cable sample with a column and from ultrasonic measurements are reported. A calibration curve relating ultrasonic velocity and cable insulation density is given for PE and crosslinked PE (XLPE) cables. The limits and advantages of deducing density profiles of cable insulation using a focused, ultrasound beam rather than the more time-consuming column measurements are discussed