Inverted Solution Processable OLEDs Using a Metal Oxide as an Electron Injection Contact.

A new type of bottom‐emission electroluminescent device is described in which a metal oxide is used as the electron‐injecting contact. The preparation of such a device is simple. It consists of the deposition of a thin layer of a metal oxide on top of an indium tin oxide covered glass substrate, followed by the solution processing of the light‐emitting layer and subsequently the deposition of a high‐workfunction (air‐stable) metal anode. This architecture allows for a low‐cost electroluminescent device because no rigorous encapsulation is required. Electroluminescence with a high brightness reaching 5700 cd m^–2 is observed at voltages as low as 8 V, demonstrating the potential of this new approach to organic light‐emitting diode (OLED) devices. Unfortunately the device efficiency is rather low because of the high current density flowing through the device. We show that the device only operates after the insertion of an additional hole‐injection layer in between the light‐emitting polymer (LEP) and the metal anode. A simple model that explains the experimental results and provides avenues for further optimization of these devices is described. It is based on the idea that the barrier for electron injection is lowered by the formation of a space–charge field over the metal‐oxide–LEP interface due to the build up of holes in the LEP layer close to this interface.     

Reflectarray research at the communications research centre Canada

It has been a decade since a research program began on reflectarray technology at the Communications Research Centre Canada (CRC). This endeavor has demonstrated the advantages and shortcomings of this technology, the issues that ought to be addressed, and future opportunities. This paper summarizes the outcome of this research in the context of projects that have been carried out, and the resulting insight into reflectarray technology. Design methodology, fabrication process, and measurements results will be briefly discussed for each particular development.     

Tri-Gate Bulk MOSFET Design for CMOS Scaling to the End of the Roadmap

A tri-gate bulk MOSFET design utilizing a low-aspect-ratio channel is proposed to provide an evolutionary pathway for CMOS scaling to the end of the roadmap. 3-D device simulations indicate that this design offers the advantages of a multi-gate FET (reduced variability in performance and improved scalability) together with the advantages of a conventional planar MOSFET (low substrate cost and capability for dynamic threshold-voltage control).     

Vibration analysis of machine tool’s hexapod table

Parallel mechanisms have found new applications in machine tool’s as the end effector carrying the spindle or used as the table of the machine. Investigations on the dynamics and especially the vibration behavior of these mechanisms are in the initial stage. The authors developed a vibration model for the hexapod table of milling machines and machining centers and derived the relevant explicit equations. The eigenvalue problem of the upper platform of hexapod was solved to obtain the natural frequencies of the platform. The results have been verified with FEM simulation. The distinguishing features of the hexapod tables from the view point of dynamic behavior have also been concluded.     

Effect of Thickness of the p-AlGaN Electron Blocking Layer on the Improvement of ESD Characteristics in GaN-Based LEDs

The following letter presents a study regarding GaN-based light-emitting diodes (LEDs) with p-type AlGaN electron blocking layers (EBLs) of different thicknesses. The study revealed that the LEDs could endure higher electrostatic discharge (ESD) levels as the thickness of the AlGaN EBL increased. The observed improvement in the ESD endurance ability could be attributed to the fact that the thickened p-AlGaN EBL may partly fill the dislocation-related pits that occur on the surface of the InGaN-GaN multiple-quantum well (MQW) and that are due to the strain and the low-temperature-growth process. If these dislocation-related pits are not partly suppressed, they will eventually result in numerous surface pits associated with threading dislocations that intersect the InGaN-GaN (MQW), thereby reducing the ESD endurance ability. The results of the experiment show that the ESD endurance voltages could increase from 1500 to 6000 V when the thickness of the p-AlGaN EBL in the GaN LEDs is increased from 32.5 to 130 nm, while the forward voltages and light output powers remained almost the same.     

Influence of Reaction Parameters on the Hydrogenolysis of Hydroxymatairesinol Over Carbon Nanofibre Supported Palladium Catalysts

The density functional theory (DFT/B3LYP) calculations were applied to investigate the interaction of a Pt₆ particle with the ZSM-5 zeolite framework. The electronic structure of the metal particle is strongly affected by the interaction with basic framework oxygens and acid sites of the zeolite support. Adsorption on basic sites (E_ads = 6 kcal/mol) favors the formation of the electron enriched metal cluster. Interaction of the platinum cluster with the acid site characterized by stabilization energy of 47 kcal/mol results in oxidation of the metal particle and suppression of Brønsted acidity of the support. The hypothesis is put forward that the oxidized platinum particle can function as an active site for the alkane isomerisation on platinum supported high silica zeolites.     

Composing RESTful Services and Collaborative Workflows: A Lightweight Approach

The use of RESTful Web services has gained momentum in the development of distributed applications based on traditional Web standards such as HTTP. In particular, these services can integrate easily into various applications, such as mashups. Composing RESTful services into Web-scale workflows requires a lightweight composition language that's capable of describing both the control and data flow that constitute a workflow. The authors address these issues with Bite, a lightweight and extensible composition language that enables the creation of Web-scale workflows and uses RESTful services as its main composable entities.     

Second-order stresses and strains in heterogeneous steels: Self-consistent modeling and X-ray diffraction analysis

Theoretical and experimetal methods have been developed to characterize the effect of mechanical loading on the mesoscopic and macroscopic mechanical state of polycrystalline materials. Ferritic and austenitic single-phase materials were first analyzed, then phase interaction was studied in a multiductile phase material (austeno-ferritic duplex steel) and a natural reinforced composite (pearlitic steel). The theoretical method is based on the self-consistent approach in which elastic and plastic characteristics of the phases have been applied through the micromechanical behavior of single-crystal-using slip systems and microscopic hardening. The effects of a crystallographic texture and phase interaction during loading and after unloading were studied. The elastic and plastic anisotropy of the grains having the same crystallographic orientation were assessed by diffraction strain analysis. The simulation was compared with the experiments performed using the X-ray diffraction technique. In the considered duplex and pearlitic steels, it was observed that the ferrite stress state is much lower than the austenite and cementite ones. The results of diffraction strain distribution have showed the pertinence of the models and give valuable information, for example, for the yield stress and the hardening parameters of each phase in a two-phase material.     

Effect of broaching on high-temperature fatigue behavior in notched specimens of INCONEL 718

Notches were machined in specimens of INCONEL 718 by a broaching process, where differing broaching runs led to differing extents of subsurface deformation and surface roughness. Fatigue tests were carried out at 600 °C with a trapezoidal loading waveform at 0.25 Hz. The broaching process that led to the more severe subsurface deformation (but lower surface roughness) showed the worst fatigue performance. Analysis of total strain amplitude in the notch root with the aid of an elastoplastic finite-element (FE) model showed that the work hardening related to the subsurface deformation caused by the different broaching can account for the difference in fatigue lives. Differences in initiation and growth behavior were seen for the two broached finishes as well as for broached and subsequently polished samples. These differences are discussed in terms of a change in crack growth initiation and growth mechanisms due to the presence of the work-hardened layer.