Income and expenditure in a spatial economy

The question explored in this paper is whether the center attracts more spending by all agents in a spatial economy than do peripheral locations, and why this might be so. This is the macroeconomics pendant to the microeconomic concern with accessibility.This paper is the result of discussions on the subject of time and space in economics with my good friend, Tonu Puu. I dedicate it to the memory of another dear friend, Claude Ponsard.     

Improvement options for a former water-driven-mill building now used as a theatre

After investigating the financial feasibility (and so abandoning the idea) of providing self-generated electricity using hydro-power, it was recommended that the top priority should be the direct connection of an electricity supply, from the mains grid to the building; this would cost £8800. Thereby, the theatre would receive a relatively unrestricted supply of electricity at cheaper unit tariffs. This improvement should be followed by the most urgent repairs being carried out to the building fabric, at an estimated cost of £6990. These repairs are necessary to ensure the continued integrity of the building's structure, thereby inhibiting the on-going deterioration.

The energy and financial appraisal also suggested a priority listing of overall improvements to the building in order to achieve a significant, economically justifiable reduction in energy demand; the recommended options are estimated to cost in total £39819. However, the capital cost of such an upgrading would only be recouped, and the theatre achieve a sustainable future, if the building were to be used more intensively and for a wider range of activities than at present in order to increase its revenue significantly.

All prices as stated are those at August 1991.     

The influence of NaCl and CO2 on the atmospheric corrosion of magnesium alloy AZ91

The influence of NaCl and CO₂ on the atmospheric corrosion of magnesium alloy AZ91 is studied in the laboratory. Samples were exposed under carefully controlled air and flow conditions; the relative humidity was 95%, the temperature was 22.0°C and the concentration of CO₂ was < 1 ppm or 350 ppm. Different amounts of sodium chloride (0–70 μg/cm²) were added before exposure. The corrosion products were analyzed by gravimetry, ion chromatography, X‐ray diffraction and scanning electron microscopy. Mass gain and metal loss results are reported. The combination of high humidity and NaCl is very corrosive towards AZ91. However, the NaCl‐induced corrosion is inhibited by ambient concentrations of CO₂. Exposure in the absence of CO₂ gives rise to heavy pitting, with brucite, Mg(OH)₂, being the dominant corrosion product. In the presence of CO₂ a layer of hydrated magnesium hydroxy carbonate, Mg₅(CO₃)₄(OH)₂ · 5 H₂O forms. A tentative corrosion mechanism is presented that explains the behavior in the two environments.     

Indexed in current contents

Indexed in current contents     

Fast approximate analysis for token passing LAN protocol with asymmetrically distributed traffic loads

A new approximate analytical expression for the mean packet delay for a non-exhaustive token passing LAN is derived and compared with discrete event computer simulation. The computational problems associated with the exact and other approximate treatments are avoided because the need to solve a system of simultaneous equations is removed.<>     

A first-order current-steering sigma-delta modulator

A new architecture is presented for a first-order sigma-delta (ΣΔ) modulator. The system achieves a high sampling frequency, can be used as a building block for higher-order modulators, and uses circuit techniques that are largely independent of a specific technology. The key features of this implementation are that it operates in a continuous-time (as opposed to switched) mode and does not need feedback amplifiers. To test the validity of the concept, the system was realized in 2-μm, n-well, double-metal, single-poly technology. It has a measured resolution of 9 b and a linearity of 13 b at a clock frequency of 20 MHz with an oversampling ratio of 128. It operates from a power supply of ±2.5 V with a power consumption of 3 mW. The circuit occupies an area of 0.92 mm²     

Chirp compensation capability of a semiconductor laser amplifier

Performance improvement is reported resulting from incorporating a semiconductor laser amplifier (SLA) as a post-transmitter-amplifier in long-haul directly modulated optical systems operating in the 1.5 mu m region. This improvement arises from reduction of the chirp produced by the semiconductor laser as the signal passes through the SLA. Eye closure penalty improvements in excess of 5 dB are observed for an illustrative long-haul 4.8 Gbit/s system.<>     

Ph Effect on Thermal Transition Temperature of Collagen

Differential scanning calorimetry (DSC) was used to measure the thermal transition temperature of bovine intramuscular and tendon collagen. Equilibration of the collagen in buffers in the pH range 4.25–7.40 resulted in a decline in transition temperature with decreasing pH. This was more pronounced in collagen with higher concentrations of aldimine crosslinks. We proposed that postmortem pH decline was responsible for the thermal transition temperature decline observed by other workers. Therefore, thermal transition temperature measurements must be performed on collagen samples that have been thoroughly equilibrated to a common pH if they are to be used as indices of structural changes.