The relation between luminous properties and oxygen content inZnS:TbOF thin-film electroluminescent devices fabricated byradio-frequency magnetron sputtering method

The purpose of this paper is to study the relationship between the oxygen concentration and brightness degradation in ZnS:TbOF green thin-film electroluminescent (EL) devices. The characteristics including crystallinity, optical, and electrical properties were discussed. The brightness-voltage (B-V) measurement results shelved that with higher oxygen-content in ZnS:TbOF phosphor layer, lower brightness was measured. It was consistent with the poor crystallinity, worse photoluminescent intensity, and easier to get moisture in the oxygen-rich (O/Tb>1) phosphor film. Furthermore, deep level transient spectroscopy (DLTS) measurements identified that when the O/Tb ratio was greater than 1, the oxygen-related deep hole traps E_H1 and/or E_H2 could be detected in the ZnS:TbOF phosphor layer. These E _H1 and/or E_H2 traps were believed to be the main killers for the brightness of the device since they capture most of the holes from the generated electron-hole pairs. This evidence strongly supports that the modified energy transfer model is more dominant than direct impact excitation during the luminescent process     

In-laboratory removal of femoral sheath following protamine administration in patients having intracoronary stent implantation

Two hundred twenty-eight patients with successful coronary stent implantation were randomized either to protamine administration and femoral sheath removal (group I, n = 117) or no heparin neutralization and delayed sheath removal (group II, n = 111). The hospital stay after treatment was shorter in patients receiving protamine; therefore, protamine use for neutralizing circulating heparin may be safely administered immediately after stent implantation.     

A specific antidote for the treatment of digitalis poisoning in uremic patients

Two chronic haemodialyzed patients with digitalis intoxication are reported. One of them took digoxin 0.25 mg three times daily for an unknown period and the other took digitoxin 0.1 mg twice daily for two weeks. The symptoms of intoxication were mainly concealed by uremic syndrome. The diagnosis was established by noticed sinus bradycardia, first- and second-degree atrioventricular block in ECG and the determination of sera levels of glycosides (serum digoxin concentration was 7.36 ng/ml, serum digitoxin concentration was 46.5 ng/ml) in both cases. Considering the probable long elimination period of digitalis and the potentially life-threatening situation the patients were given digoxin-specific antibody (Fab) fragments with potassium replacement therapy. The symptoms disappeared within a few hours after therapy, side effects and rebound toxicity did not develop. In connection with these cases the aim of this report is to publish a method which can reverse the life-threatening digitalis intoxication in patients suffering from renal failure as well. As to the above method, the authors have not found any similar case reports in the Hungarian medical literature.     

Detection and Validation of Clusters of Polynomial Zeros

We consider the task of partitioning the zeros of a real or complex polynomial into clusters and of determining their location and multiplicity for polynomials with coefficients of limited accuracy. We derive computational procedures for the solution of this task which combine symbolic computation with floating-point arithmetic. The validation of the existence ofmzeros in a specified small disk is described.     

Determination of diffusing capacity by modeling the dynamics of C18O uptake in newborns

Dynamic modeling of lung C¹⁸O diffusion is used to measure the C¹⁸O transfer factor (TL_co) of 14 newborns aged 1-4 mo. The model equation is based on the alveolar fractions of C¹⁸O and on changing alveolar ventilation induced by the rebreathing conditions. The model does not involve the volume of the rebreathing bag which is usually needed when applying rebreathing technique add which is a source of error. The equation is discretized and solved for recorded data obtained with equipment adapted to use in newborns. A least-square parameter calculation technique is applied to estimate TL_co. Results show a strong relationship between this index and the biometrical ones and confirm those found in the literature featuring that the measurement duration can be considerably shortened     

Electric lead field for a piecewise homogeneous volume conductormodel of the head

A new method is presented for computing the electric lead field of a realistic head shape model which has piecewise homogenous conductivity. The basic formulae are derived using the well-known reciprocity theorem. Previously described methods are also based upon this theorem, but these first calculate the electric potential inside the head by a scalar boundary element method (BEM), and then approximate the ohmic current density by some sort of gradient. In contrast, this paper proposes the direct evaluation of the ohmic current density by discretizing the vector Green's second identity which leads to a rector version of BEM. This approach also allows the derivation of the same equations for the three concentric spheres model as obtained by Rush and Driscoll (1969). The results of simulations on a spherical head model indicate that the use of a vector BEM leads to an improvement of accuracy in the computation of the ohmic current density with respect to those reported previously, in term of different measures of error     

Stochastic complexity measures for physiological signal analysis

Traditional feature extraction methods describe signals in terms of amplitude and frequency. This paper takes a paradigm shift and investigates four stochastic-complexity features. Their advantages are demonstrated on synthetic and physiological signals; the latter recorded during periods of Cheyne-Stokes respiration, anesthesia, sleep, and motor-cortex investigation     

On the RLSA antenna optimum design for DBS reception

An optimal design for the RLSA (radial line slot array) antenna useful for DBS reception is presented. Classical geometries and structures given in the literature are first used. It is found that in some cases these are not suitable. So, optimization techniques by using the right objective functions have been applied. Two different methods were developed and three antennas were designed. Numerical results and comparisons with other similar antennas give the advantages of our design     

Distribution of recombination currents in the space charge regionof heterostructure bipolar devices

This paper addresses the problem of the space charge region Shockley-Read-Hall (SRH) recombination currents in heterojunctions with one noncrystalline side. A formulation which generalizes previous works is discussed. The approach is based on the drift-diffusion model with a thermionic-field emission boundary condition. The main physical parameters which determine the relative contribution of each zone of the space charge region (SCR) to the total recombination current are identified. The general analysis is applied for the first time to amorphous/crystalline heterojunctions and design criteria are established to minimize the total recombination current