Planar-flow spin-casting of molten metals: process behaviour

An experimental study of the planar-flow melt-spinning process was performed in order to gain a better understanding of the steady-state production of microcrystalline and amorphous ribbons. The dependence of the thickness of the ribbon product,T, on process parameters (wheel speed,U, nozzle/wheel gap,G, overpressure, ΔP, nozzle-slot breadth,R, and nozzle-slot width,W) was determined using an apparatus designed to deliver reproducible results. Thicknesses were reproducible to within 5%–8%. Guided by dimensional analysis, the non-dimensional thickness (T/G) was found to depend, within the experimental error, only on a non-dimensional pressure drop (ΔP/ρU ²) and slot breadth (R/G) for fixed thermal conditions. Data from the literature and our data, which considerably extend the range, correlate consistently on this basis. In contrast to the steady behaviour, the limits within which a uniform ribbon can be formed depend on a larger set of parameters; this dependence is sketched with the available data. Finally, a variety of observed ribbon surface textures (free meniscus side) is catalogued.     

Performance characteristics of a composite multivariate quality control system.

We present the results of an evaluation of the performance characteristics of a composite multivariate quality control (CMQC) system that incorporates quality control rules for univariate, multivariate, and correlation conditions. The CMQC system evaluated is designed to help analysts detect unacceptable trends and systematic error in one or more variables, unacceptable random error in one or more variables, and unacceptable changes in the correlation structure of any pair of variables. It is also designed to be tolerant of missing data, to allow analysts to reject as few as one or as many as all variables in a run, and to provide analysts with control statistics and graphics that logically relate to sources of analytical error. We show that the various components of the CMQC system have adequate statistical power to detect systematic errors, random errors, and correlation changes under the conditions likely to be encountered with multivariate analytical measurement systems: (1) a single variable with increased systematic or random error; (2) all variables or a subgroup of variables affected by a common problem that increases systematic or random error; and (3) missing data for one or more variables in a run. We also show that the power of the multivariate component of the CMQC system to detect systematic and random errors is higher than the power of an alternative multivariate test criterion.     

Wigner-space synthesis of discrete-time periodic signals

A procedure that facilitates at least-squares synthesis of periodic, discrete-time signals from Wigner quasi-distributions is proposed. The scheme is based on expanding the desired time sequence on a generally nonorthogonal, Gabor-type basis whose associated biorthogonal function presumably exists. The specific basis selection may crucially affect the efficiency and quality of the ensuing synthesis procedure. The cited basis type constitutes a considerable generalization over the standardly used orthogonal variety, thus creating previously unavailable degrees of freedom. Of primary significance is the acquired capability of generating time-frequency basis functions that are well localized. Localization is a highly desirable property that can advantageously serve in various applications. It is shown and numerically demonstrated that benefits of localization as well as the fact that achieving effective time-frequency basis localization renders a certain degree of oversampling unavoidable     

The use of probability theory in fracture mechanics—A case study

A probabilistic approach to fracture mechanics in the form of a typical case study is described wherein the integrity of a high-pressure water pipeline is assessed. An analysis methodology is discussed incorporating the probability density functions of defect sizes, the statistics of defect occurrences and the statistical distribution of material properties. This method enables the analyst to supply a very simple assessment of safety, based on the probability of failure (a single number) which may be compared to accepted industrial standards (e.g. 10⁻⁶ for nuclear applications). It is argued that this method often offers the only way to scientifically and economically assess the integrity of fracture prone structures.     

Relative permeability measurements for two phase flow in unconsolidated sands

This paper presents the results of laboratory measurements of relative permeability for two phase flow in partially saturated samples of unconsolidated sands. Relative permeabilities for tap water and air, de-aired water and nitrogen were measured using a steady—state technique. Three different sand samples (fine sand, heterogeneous sand and coarse sand) were tested.     

Harvesting small trees and forest residues

Eight countries collaborated and shared technical information on the harvesting of small trees and forest residues in a three year program. Proceedings and reports from workshops and reviews are summarized in a review of activities and harvesting systems of the participating countries. Four databases were developed for harvesting and transportation of these materials.     

Analysis of a resonant-cavity enhanced GaAs/AlGaAs MSMphotodetector

The authors have developed a 2-D device simulator for heterostructure metal-semiconductor-metal (MSM) photodetectors. They have incorporated a model of multilayer optics into the simulator and used it to analyze the temporal response of a resonant-cavity enhanced heterostructure with a confining buffer layer and a distributed Bragg reflector (DBR). The authors show that through fine tuning the layer thicknesses, optical resonance enhancement of the light absorption can be obtained     

Three-dimensional fracture simulation with a single-domain,direct boundary element formulation

An efficient hypersingular boundary integral equation method for three-dimensional fracture mechanics was presented in a previous paper. The details of the numerical implementation of this method are further discussed herein. In particular, an algorithm for achieving the required differentiability of the crack surface displacement function is discussed. To illustrate the utility of the method, computational results for several strongly interacting multiple-crack geometries are presented. The calculated stress intensity factors are in excellent agreement with those obtained by an approximate analytical method due to Kachanov and Laures.     

Numerical and asymptotic solutions for the thermal wall jet

This paper considers the evolution of the velocity and temperature fields within a jet of fluid on a thermally insulated wall. Numerical solutions are obtained for a range of Prandtl numbers and for a class of initial velocity and temperature profiles relevant to intrusion jets observed in certain thermal cavity flows. Numerical results are compared with asymptotic solutions which describe the initial structure of the jet and its subsequent diffusion at large distances downstream.