A STUDY OF SUPERIMPOSED FRACTURE MODES I, II AND III ON PMMA

A test apparatus has been developed to study the fracture behaviour of engineering materials subjected to superimposed tensile and shear (Mode I and II) loads using a single edge notch specimen. Stress intensity factors were calculated using finite element analysis. Test results for PMMA are reported. Results from circumferentially notched round bar specimens, subjected to combined tension and torsion (Mode I and III) loading are also reported. The Mode I/II results are consistent with the mixed mode fracture response of a wide range of brittle materials, although there is some evidence of non-linear behaviour. The fracture behaviour for superimposed Modes I and III indicates the strong influence of non-linear deformation which causes the mixed mode toughness to be dependent on the sequence and type of loading.     

Restenosis and arterial remodelling after coronary angioplasty

Restenosis after coronary angioplasty (PTCA) is a complex process and is still the major problem, despite improvements in equipment and technique. Thrombus formation and intimal hyperplasia have been considered to be the main causes of the development of restenosis after primary successful angioplasty. As yet, pharmacological trials to prevent restenosis have failed to prevent it, despite the fact that the therapy has been aimed at reducing thrombus formation and intimal hyperplasia. Several new angioplasty devices have been developed. Series of observations and a few controlled trials have demonstrated restenosis rates similar to those obtained with conventional balloon angioplasty, except in the case of stent implantation, which appears to be promising. Intravascular ultrasound studies have provided new insight and a more complete understanding of the process leading to restenosis. Vascular remodeling is now considered as an important pathogenetic factor. It consists of a change in the cross-sectional vessel area and may involve an actual constriction of the artery. This may lead to lumen-narrowing and finally restenosis with minimal neointimal formation. In this review we summarise the literature on the restenosis process and the current status of the clinical trials aimed at preventing restenosis.     

Middle cerebral artery main stem thrombosis in two siblings with familial thrombotic thrombocytopenic purpura

Idiopathic thrombotic thrombocytopenic purpura (TTP) is frequently complicated by microinfarcts in cerebral cortex and subcortical white matter. We describe two sisters who suffered massive hemispheric infarction due to thrombosis of the middle cerebral artery main stem during exacerbations of TTP. Acute TTP may be associated with intraluminal thrombosis of large-diameter arteries in addition to arterioles and capillaries.     

Characterization of expression of phosphofructokinase isoforms in isolated rat pancreatic islets and purified beta cells and cloning and expression of the rat phosphofructokinase-A isoform

We prepared polymers having a phospholipid polar group, poly [omega-methacryloyloxyalkyl phosphorylcholine (MAPC)-co-n-butyl methacrylate(BMA)], as new biomedical materials and evaluated their blood compatibility with attention to protein adsorption and platelet adhesion. The total amount of proteins adsorbed on the polymer surface from human plasma was determined, and the distribution of adsorbed proteins on the plasma-contacting surface was analyzed. The amount of proteins adsorbed on every poly (MAPC-co-BMA) was small compared with that observed on polymers without the phospholipid polar group. However, there was no significant difference in the amount of adsorbed proteins on the poly(MAPC-co-BMA) even when the methylene chain length between the phospholipid polar group and the backbone in the MAPC moiety was altered. Platelet adhesion on the polymer surface from a platelet suspension in a buffered solution was evaluated with and without plasma treatment on the surface. When a rabbit platelet suspension was brought into contact with the poly(BMA) surface after treatment with plasma, many platelets adhered and aggregated. However, a reduced amount of platelet adhered on the poly(BMA) was found in the case of direct contact with the platelet suspension. On the other hand, the poly(MAPC-co-BMA)s could inhibit platelet adhesion under both conditions. Based on these results, it can be concluded that the proteins adsorbed on the surface play an important role in determining the platelet adhesion and suppression of the protein adsorption on the surface, which is one of the most significant ways of inhibiting platelet adhesion.     

High-power GaInP-AlGaInP quantum-well lasers grown by solid source molecular beam epitaxy

AlGaInP-based quantum-well laser diodes operating at wavelengths near 680 nm have been grown by all solid source molecular beam epitaxy (SSMBE). The lowest room temperature threshold current densities obtained from shallow ridge structures were 300 A/cm/sup 2/ and 330 A/cm/sup 2/ for pulsed and continuous wave operation, respectively. The dependences of the differential quantum efficiency and threshold current density on the cavity length were also studied in this preliminary SSMBE work. The internal quantum efficiency of 87-89% and the internal losses of 7-10 cm/sup -1/ were obtained.     

Loss performance of tagged and normal ATM cells at a partiallyshared buffer

The loss performance of tagged and normal ATM cells at a first-in-first-out (FIFO) buffer is studied. The authors show that if a partial buffer sharing mechanism is adopted the loss probability of normal cells can be firmly guaranteed, regardless of the traffic intensity of tagged cells     

Damage of polymers studied by micro-Fourier Transform Raman spectroscopy

Summary The potential of the micro-Fourier Transform Raman tool in examining specific localized regions in polymeric materials with some degree of fluorescence when analyzed by conventional Raman spectroscopy is examined. Analysis of characteristic bands of the vibrational spectra obtained in a small area damaged by a visible and NIR laser beam in commercial Polyethylene Terephthalate (PET) shows a different conformer ratio than that observed in a non irradiated zone.