Protoporphyrin-IX as a Substitute for Nitrite in Cured-Meat Color Production

The iron-free heme derivative protoporphyrin-IX, was added to a cooked emulsified beef product to mimic the typical cured-color obtained with nitrite. Although the pigment was stable and could be recovered from the emulsion it imparted a purple hue as noted by visual observation and Hunterlab color values (L,a,b). The possible implications of this pigment as a meat colorant are discussed.     

Organochlorine Contaminants of Wintering Ducks Foraging on Detroit River Sediments

Organochlorine analysis was performed on carcasses of 13 diving ducks from a 1981 wintering population that foraged on contaminated sediments in the lower Detroit River. Mean total PCB concentrations were 10 mg/kg for seven lesser scaups (Aythya affinis), 11 mg/kg for three greater scaups (A. marila), and 7.6 mg/kg for three goldeneyes (Bucephala clangula). Highest mean levels of other residues were measured for hexachlorobenzene (1.7 mg/kg) in goldeneyes, and transnonachlor (0.33 mg/kg) and 4,4’-DDE (1.3 mg/kg) in greater scaup. Quantitative analysis of 72 PCB congeners also was applied to water, seston, sediment, benthie oligochaetes, and carp from the same site. Principal congeners in most of the samples included some of the more toxic and persistent PCBs. Results of a multivariate analysis indicated that ratios of more conservative to less conservative PCBs did not vary significantly among ducks (α = .05), but differed from those in carp, oligochaetes, and sediment. For the February through March period of fat mobilization, concentrations of total PCB in lipid were inversely correlated with percent lipid (r = 0.76) in ducks. The percentage of conservative PCBs increased slightly. The distribution and partitioning of organochlorines, including toxic PCB congeners, varied considerably within this water column-sediment-fauna ecosystem. Estimates of toxic exposure based on total PCB values may be unreliable.     

Muscle-ligament interactions at the knee during walking.

A two-dimensional mathematical model of the knee is used with gait analysis to calculate muscle, cruciate ligament and tibio-femoral contact forces developed at the knee during normal level walking. Ten normal adult subjects--four females and six males--participated. The knee model is based upon a four-bar linkage comprising the femur, tibia and two cruciate ligaments. It takes account of the rolling and sliding of the femur on the tibia during flexion/extension and the changes in direction of the ligaments and muscle tendons. We considered forces transmitted by six elements: quadriceps, hamstrings, gastrocnemius, anterior and posterior cruciate ligaments, and tibio-femoral contact. The equations of mechanics can be used to determine the absolute values of only three of the knee forces simultaneously, so that twenty limiting solutions of three of the six forces were considered. A limiting solution was rejected if any of the three forces were negative, corresponding to compressive muscle or ligament forces, or tensile contact forces. These constraints always reduced and at times removed the redundancy of the knee structures. The high incidence of predicted single muscle activity, supported by electromyography, suggested that the ligaments play a significant role in load transmission during gait. The temporal patterns of muscle and ligament activity and ligament force magnitudes were sensitive to the choice of model parameters. The analysis showed that each of four possible minimum principles of muscle selection--minimal muscle force, muscle stress, ligament force and contact force--was unlikely to be valid throughout the walking cycle.     

Comparative studies on the enzymatic absorption of protein hydrolysates in the small intestine of the rat. 3. The absorption trypsins thermatatic and trypsin-thermatatic hydrolysates of a fava bean protein isolate compared to an equimolar mixture of free amino acids

Tryptic, thermitatic, and tryptic-thermitatic Faba bean protein hydrolyzates as well as their equimolar mixture of amino acids were perfused through proximal and distal parts of the intestine (10 cm length) of non-narcotized rats. The total amino-acid concentration of the perfused solution was 50 mM. The absorption of nitrogen and total amino acids from the tryptic and tryptic-thermitatic hydrolyzates was lower than that from the amino-acid mixture, the absorption from the thermitatic hydrolyzate was in accordance with that from the amino-acid mixture. The absorption pattern of the amino acids which preferably undergo a peptidic absorption is similar with the three hydrolyzates: in the proximal intestinal part this concerns glutamic acid and serine, in the distal intestinal part--methionine, alanine, glycin, and serine. The absorption pattern of the amino acids is different between the three hydrolyzates and the amino-acid mixture. Between the absorption pattern of the amino acids from the three hydrolyzates little differences were evident only in the proximal intestinal part. The coefficients of variation of the tryptic-thermitatic hydrolyzates are in accordance with those of the amino-acid mixture, whereas that of the thermitatic hydrolyzates is significantly lower. In the distal intestinal part all supplied forms are more rapidly absorbed than in the proximal part of the intestine.     

Magnetic induction micromachine-part I: Design and analysis

Most microscale electric and magnetic machines studied in the last decade lack the power density to support many practical applications. This paper introduces a design for a magnetic induction machine that offers power densities in excess of 200 MW/m/sup 3/ and efficiencies of up to 50%, while providing more than 10 W of mechanical power. This is a substantial performance increase in MEMS electromagnetic machines studied to date.     

The development of a stress analysis code for nuclear graphite components in gas-cooled reactors

Most of the UK nuclear power reactors are gas-cooled and graphite moderated. As well as acting as a moderator the graphite also acts as a structural component providing channels for the coolant gas and control rods. For this reason the structural integrity assessments of nuclear graphite components is an essential element of reactor design. In order to perform graphite component stress analysis, the definition of the constitutive equation relating stress and strain for irradiated graphite is required. Apart from the usual elastic and thermal strains, irradiated graphite components are subject to additional strains due to fast neutron irradiation and radiolytic oxidation. In this paper a material model for nuclear graphite is presented along with an example of a stress analysis of a nuclear graphite moderator brick subject to both fast neutron irradiation and radiolytic oxidation.     

Characterization of an ASIC for CPG sensors with grid-only depth of interaction sensing

A new version of the front-end application specific integrated circuit (ASIC) for co-planar-grid (CPG) sensors is presented. Compared to the first version, the ASIC is optimized for signal/noise performance, modified in peaking time, and it implements timing signals to measure the depth of interaction using the grids signals only. Experimental results using state-of the-art CPG sensors and different approaches for reducing the error due to electron trapping are reported. A new technique that makes use of the sum and difference of the grids signals is also presented.     

Characterization of the activated sludge and of the operating conditions of six SBR treating dairy effluent and operated at industrial scale.

The sludge from six SBRs treating dairy effluent and located at same geographical location, in North East of France, were collected to study their characteristic behavior. The six plants were designed and constructed by the same manufacturer and are working under quite similar operating conditions. The objective of the study was to observe if any similarity existed in the characteristics of the sludge collected from the SBRs. The sludge was characterized for morphological properties (filament index, floc size), settling, compressibility, suspended solids (SS) concentration. The sludge from each plant was different from the others in most of the characteristics. One sludge out of six (sludge G) was completely different from the others with a very degraded structure and low discrete settling and compression. This reactor was not working fully satisfactorily with a too high COD at outlet, probably because this SBR was undergoing repetitive overloading linked to a very bad recovery of the whey by the cheese maker. The five other SBRs were working fully satisfactorily but the characteristics of the five sludges were quite different from one sludge to another. The size of the flocs seemed to be the only parameter measured which could be correlated to the settling characteristics of the sludge. The sludge characteristics and the parameter correlations were also compared with that of municipal activated sludge and were found to be very different.     

Microprocessor testability

As the level of microprocessor complexity increases to several hundred thousand transistors for a single-chip machine, it is becoming very difficult to test commercially available designs to the level of fault coverage desired by some customers. In order to achieve near 100-percent coverage of single stuck-at faults, future microprocessors must be designed with special testing features (designed for testability). The authors describe the testing problem for microprocessors, including the various methods of generating test sets and their application by the user. A survey of the testability features of some of today's commercially available microprocessors is presented. Suggestions for testability features for future-generation microprocessors are also discussed     

Probability of error for selection diversity as a function of dwelltime

An expression is derived for the probability of error of an N th-order selection diversity system for the case where the receiver is forced to swell on one channel for several symbols before being allowed to make a decision regarding the best channel. It is found that the time-varying nature of a fading channel causes significant degradation of the probability of error when the dwell time becomes longer than about 10% of the inverse of the fading bandwidth of the channel. The onset of degradation is a function of the signal-to-noise ratio and of the order of diversity. Specific probabilities of error are calculated for differential phase-shift keyed modulation (DPSK). However, the calculations can be done for any other modulation technique