Biaxiale Ermüdung reibrührgeschweißter Strukturelemente

Biaxial fatigue of friction stir welded stiffened panels Within the framework of the European WelAir project, cruciform specimens made from stiffening FSW overlap joints were fatigued in the DLR biaxial test rig. To resemble the loading situation of pressurized fuselage structures, proportional loading without any phase shift, but with different load ratios λ between the loading components in both directions was applied.Natural crack initiation and subsequent crack growth were governed by the stiffness gradient caused by introducing the stringer. Cracks initiated and propagated at run‐in and run‐out locations in a direction perpendicular to the weld seam. The shortest fatigue life was observed for uniaxial loading in welding direction (λ = 0). An additional stress component perpendicular to the joint line (λ > 0) resulted in a higher number of cycles to failure. Similar to single stringer panels, increasing the load ratio also increased the number of cycles to failure for FSW clip‐stringer structural members, but additionally gives a different location of the fatal crack.     

Mechanical improvement of hydroxyapatite by TiO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> nanoparticles deposition

Deposition of Ti was carried out by laser ablation onto hydroxyapatite porous discs in an Ar atmosphere. Ti nanoparticles were deposited onto HAp surface in order to modify its roughness and morphology as it is observed by scanning electron microscopy (SEM) and scanning probe microscopy (SPM). A homogeneous distribution of Ti over the disc surface was corroborated by elemental mapping. A comparison of the hydroxyapatite hardness before and after deposition was performed using SPM nanoindentation. Transmission Electron Microscopy (TEM) showed that the Ti nanoparticles obtained were covered by an oxygen shell. It is shown that surface modifications of the covered HAp by Ti result in better mechanical properties, reducing the possible damage to the HAp ceramic by friction or impacts as it often happens in meniscus, bone junctions and the inclusion of prosthesis for human treatments.     

Visual insights into high-resolution earthquake Simulations.

This study focuses on the visualization of a series of large earthquake simulations collectively called TeraShake. The simulation series aims to assess the impact of San Andreas Fault earthquake scenarios in Southern California. We discuss the role of visualization in gaining scientific insight and aiding unexpected discoveries.     

Optical Splitting Trees for High-Precision Monocular Imaging

In this article, we consider the design of monocular multiview optical systems that form optical splitting trees, where the optical path topology takes the shape of a tree because of recursive beam splitting. Designing optical splitting trees is challenging when it requires many views with specific spectral properties. We introduce a manual design paradigm for optical splitting trees and a computer-assisted design tool to create efficient splitting-tree cameras. The tool accepts as input a specification for each view and a set of weights describing the user's relative affinity for efficiency, measurement accuracy, and economy. An optimizer then searches for a design that maximizes these weighted priorities. Our tool's output is a splitting-tree design that implements the input specification and an analysis of the efficiency of each root-to-leaf path. Automatically designed trees appear comparable to those designed by hand; we even show some cases where they are superior. With the help of the optimizer, the system demonstrates high dynamic range, focusing, matting, and hybrid imaging implemented on a single, reconfigurable camera containing eight sensors     

Pupils' recall of an interactive storybook on CD-ROM

Abstract This small-scale study compares two groups of Year 4 (8/9 year-old) pupils either reading or playing an interactive storybook . The study considered pupils' recall of propositions, which formed the story setting and episodes, and of micro-propositions and characters' names, and pupils' responses to inferential items derived from the 'interactive storybook'. The study indicates that, whether reading or playing, pupils' recall of the story setting was sound, but pupils who had read the interactive storybook demonstrated greater recall of the story event structure than those who had engaged in interactive picture-play. Pupils who had played the interactive storybook demonstrated significantly greater recall of micro-propositions and names.     

Mathematical and experimental method to obtain the inverse modeling of nonsinusoidal and saturated synchronous reluctance motors

This paper presents new inverse modeling for synchronous reluctance motor (SyRM). This modeling is valid when the inductances are sinusoidal or nonsinusoidal and even when the machine is saturated. This technique involves the generation of constant torque curves as a function of two-phase currents in the Concordia's reference frame when the rotor angle is fixed. We also introduce an experimental method to obtain directly the inverse modeling. This practical method takes into account the saturation of the motor. This technique allows the reduction of the low torque ripple in the case of nonsinusoidal inductances.     

A model for bilayer membrane electroporation based on resultant electromechanical stress

Reconsideration of the effect of an electrical field applied across a phospholipid bilayer membrane shows that, in addition to a compressive stress normal to the membrane plane, transverse traction stresses are generated in the lateral plane of the membrane. In the fields usually employed for electroporation these transverse stresses are likely to be sufficient to reduce the membrane tension considerably, causing electroporation and rupture. This mode of field-induced change in the membrane provides a natural model for the various forms of electroporation.     

Kinetics of chlorination of tantalum pentoxide in mixture with sucrose carbon by chlorine gas

The mechanism and kinetics of β-Ta₂O₅ chlorination, mixed with sucrose carbon, have been studied by a thermogravimetric technique. The investigated temperature range was 500 °C to 850 °C. The reactants and reaction residues were analyzed by scanning electronic microscopy (SEM), X-ray diffraction (XRD), and Brunauer-Emmett-Teller method for surface area (BET). The effect of various experimental parameters was studied, such as carbon percentage, temperature, chlorine partial pressure, and flow, use of the multiple sample method, and carbon previous oxidation. The carbon percentage and previous treatment have an effect on the system reactivity. The temperature has a marked effect on the reaction rate. In the 500 °C to 600 °C temperature interval, the apparent activation energy is 144 kJ/mol of oxide, while at higher temperatures, the activation energy decreases. With high chorine partial pressures, the order of reaction is near zero. The kinetic contractile plate model, X=kt, considering carbon oxidation as the controlling stage, is the one with the best fit to the experimental data. A probable mechanism for the carbochlorination of β-Ta₂O₅ is proposed: (1) activation of chlorine on the carbon surface, (2) chlorination of Ta₂O₅, (3) oxidation of carbon, and (4) recrystallization of β-Ta₂O₅.