Shelf Life and Sensory Characteristics of Baby Spinach Subjected to Electron Beam Irradiation

Abstract: The use of ionizing radiation for the control of foodborne pathogens and extending the shelf life of fresh iceberg lettuce and fresh spinach has recently been approved by the U.S. Food and Drug Administration. The efficacy of electron beam irradiation for controlling foodborne pathogens has been reported. For this experiment, the effectiveness of electron beam irradiation on the microbiological and sensory characteristics of fresh spinach was studied. Total aerobic plate counts were reduced by 2.6 and 3.2 log CFU/g at 0.7 and 1.4 kGy, respectively. Lactic acid bacteria were reduced at both doses of e-beam but grew slowly over the 35 d of the experiment. Yeasts and molds were not reduced in samples exposed to 0.7 kGy whereas 1.4 kGy significantly reduced microbial counts. Gas compositions (O₂ and CO₂) were significantly different than controls. Oxygen levels inside the spinach sample bags decreased over time; however, O₂ levels did not drop below 1% that can induce anaerobic fermentation. CO₂ levels for all treatments increased through day 4; yet 7 d after irradiation, CO₂ level differences were not significant in both control and irradiated samples. Irradiation dose did not affect the basic tastes, aromatics, or mouth feels of fresh spinach, however; hardness attributes decreased as irradiated dose increased and slimy attributes of fresh spinach were higher in control samples compared to irradiated samples.     

Presence of furosine in honeys

Nineteen commercial samples (with a shelf‐life of 2 years) and two artisanal samples (freshly collected and stored for 1 year respectively) of Spanish honeys were analysed for pH, protein content and furosine content. Most of the samples had pH values and protein contents within the limits reported in the literature. The presence of furosine was confirmed by comparison of its retention time with that of a furosine standard and by HPLC–MS. The level of furosine in the samples studied ranged from 4.32 to 13.62 g kg^?1 protein. The lowest furosine value was observed in the freshly collected artisanal sample. Heat treatment under severe conditions (90 °C for up to 135 min) increased the furosine content from 4.43 to 14.38 g kg^?1 protein. The results show that furosine seems to be a promising indicator to detect overheating during honey manufacture. © 2001 Society of Chemical Industry     

Influence of lipase and/or emulsifier addition on the ileal and faecal nutrient digestibility in growing pigs fed diets containing 4% animal fat

Information on the addition of lipase and/or emulsifiers to less digestible or saturated fat sources, such as tallow or other animal fats, used in swine feeding is very limited. Therefore, in a 4 × 4 Latin square design, the effects of adding lipase (0.05% L5, microbial source) and/or an emulsifier (0.3% Lysoforte) on the apparent ileal (AID) and faecal (AFD) digestibility of the main nutrients and fatty acids in particular were studied with four ileal‐cannulated growing pigs (female, initial live weight 20 kg) fed diets containing barley/soybean meal supplemented with 4% animal fat. The fat source contained 35% saturated (S) and 65% unsaturated (U) fatty acids. All diets were free of antibacterial substances (antibiotics, copper sulphate or zinc oxide beyond requirements), in order to avoid interactions between the parameters studied and the gut flora. Lipase addition did not affect the AID or AFD of fat. However, the digestibility of minor fatty acids (C6:0, C14:0) was significantly improved by lipase at both ileal and faecal level. On the other hand, lipase supplementation (P < 0.05) improved the AID of dry matter (DM) and energy as well as the AFD of DM, organic matter (OM), crude protein (CP), ash and energy. Addition of an emulsifier did not have any significant influence on the AID or AFD of fat, while the AID values of DM, OM, CP and energy as well as the AFD values of DM, OM, CP and ash were significantly (P < 0.05) improved. Adding lipase in combination with an emulsifier to the diets decreased (P < 0.05) the AID and AFD of fat, with minor effects on the AID and AFD of the non‐fat components of the diet. The lack of improvement in the digestion of fat by exogenous lipase and/or emulsifier may be related to the rather high U/S ratio (0.65:0.35) of the animal fat source used and to the mode of incorporation of the emulsifier (no pre‐dispersion in the fat source). Furthermore, during the trial the diets, stored at room temperature, showed a steady increase in their content of free fatty acids (to more than 700 g kg^?1 fat), due to endogenous lipase activity, leaving less room for upgrading the digestion of animal fat by exogenous lipase and/or emulsifier. Copyright © 2004 Society of Chemical Industry     

Elevated carbon dioxide affects fruit flavor in field‐grown strawberries (Fragaria × ananassa Duch)

The effect of elevated carbon dioxide on fruit quality and aroma volatile composition in field‐grown strawberries (Fragaria × ananassa Duch) was studied. Elevating the ambient CO₂ concentration (ambient + 300, and ambient +600 µmol mol^?1 CO₂) resulted in high fruit dry matter, fructose, glucose and total sugar contents and low citric and malic acid contents. High CO₂ growing conditions significantly enhanced the fruit content of ethyl hexanoate, ethyl butanoate, methyl hexanoate, methyl butanonate, hexyl acetate, hexyl hexanoate, furaneol, linalool and methyl octanoate. Thus, the total amounts of these compounds were higher in berries grown in CO₂‐enriched conditions than those grown in ambient conditions. The highest CO₂ enrichment (600 µmol mol^?1) condition yielded fruit with the highest levels of these aroma compounds. Copyright © 2004 Society of Chemical Industry     

Isolation and characterization of Shiga toxin-producing Escherichia coli O157:H7 and non-O157 from beef carcasses at a slaughter plant in Mexico

The contamination of beef carcasses with Shiga toxin-producing O157:H7 and non-O157 Escherichia coli (STEC) obtained from a slaughter plant in Guadalajara, Mexico was investigated. A total of 258 beef carcasses were sampled during a 12-month period. All samples were assayed for STEC by selective enrichment in modified tryptone soy broth supplemented with cefixime, cefsulodin and vancomycin, followed by plating on Sorbitol MacConkey Agar supplemented with cefixime and tellurite (CT-SMAC). Simultaneously, all samples were assayed by immunomagnetic separation (IMS) and plated on CT-SMAC and CHROMagar. The presence of the stx1, stx2, eaeA and hly933 genes, recognized as major virulence factors of STEC, was tested for O157:H7 and non-O157 E. coli isolates by multiplex polymerase chain reaction (PCR). STEC was detected in two (0.8%) samples. One of these STEC isolates corresponded to the serotype O157:H7 showing stx2, eaeA and hyl933 genes. The other isolate corresponded to non-O157 STEC and only had the stx1 gene. Thirteen carcasses (5%) were positive for nonmotile E. coli O157 and 7 (2.7%) were positive for E. coli O157:H7. The presence of O157:H7 and non-O157 STEC on beef carcasses in this slaughter plant in Guadalajara, Mexico, emphasizes the importance of implementing the Hazard Analysis and Critical Control Point (HACCP) system, as well as the need for implementing, evaluating, and validating antimicrobial interventions to reduce the presence of potential pathogenic microorganisms.     

Dielectric relaxation studies on polymeric salts: Poly(methylmethacrylate-co-N,N-dimethylaminopropyl-acrylamide) benzoic acid systems

A series of polymeric salts of p-substituted benzoic acids in poly(methylmethacrylate-co-N,N-dimethylaminopropylacrylamide) were prepared and AC impedance studies of film-attached electrodes were carried out. The impedance curves and conductivity variation with temperature were analysed. The parameter which describes the shape of the circular arcs in the impedance curves was temperature independent, and the distribution of relaxation times remained constant during the test on the material. Furthermore, the ionic conductivity was highly dependent on the chemical structure produced by the substituted benzoic group.     

Short-run statistical process control: Q-Chart enhancements and alternative methods

The first two tables in Reference 1 are incorrect. Corrected tables are provided below. The errors do not affect the conclusions or the discussion in that paper.     

Surface wetting phenomena of plasma polymer-coated sheets of poly(l-lactic acid)/poly(butylene succinate)

Water-repellent surfaces were fabricated on blend sheets of poly(l-lactic acid)/poly(butylene succinate) with various blending ratios by the successive processing; (1) plasma etching, followed by (2) the hydrophobic plasma polymer coating. Rough morphology was formed effectively on the mosaic structured surface of blend sheets via the oxidative etching, and advanced water repellency was achieved after the thin membrane coating was synthesized with a hydrophobic plasma polymer coating by use of hexamethyldisiloxane or hexamethyldisilazane. High water repellency is expressed through the columnar hair-like structured model, where the air-water surface interaction in the voids is taken into account.