I3WSN: Industrial Intelligent Wireless Sensor Networks for indoor environments

Sensor Web Enablement (SWE) technologies have been successfully applied to a great variety of outdoor scenarios but, in practical terms, little effort has been applied for indoor environments, and even less in the field of industrial applications. This article presents an intelligent SWE application for an indoor and industrial scenario, with the aim of improving and increasing the levels of human safety. The base low-level architecture is built on top of wireless sensor networks (WSN) connected to a Sensor Observation Service (SOS). Higher layers in the architecture include services that make real time decisions based on the collected data. Both simulation and experimental results are presented. The paper shows the viability of our approach in terms of performance, scalability, modularity and safety.     

Towards an Unbiased Comparison of CC,BCC, and FCC Lattices in Terms of Prealiasing

In the literature on optimal regular volume sampling, the Body‐Centered Cubic (BCC) lattice has been proven to be optimal for sampling spherically band‐limited signals above the Nyquist limit. On the other hand, if the sampling frequency is below the Nyquist limit, the Face‐Centered Cubic (FCC) lattice was demonstrated to be optimal in reducing the prealiasing effect. In this paper, we confirm that the FCC lattice is indeed optimal in this sense in a certain interval of the sampling frequency. By theoretically estimating the prealiasing error in a realistic range of the sampling frequency, we show that in other frequency intervals, the BCC lattice and even the traditional Cartesian Cubic (CC) lattice are expected to minimize the prealiasing. The BCC lattice is superior over the FCC lattice if the sampling frequency is not significantly below the Nyquist limit. Interestingly, if the original signal is drastically undersampled, the CC lattice is expected to provide the lowest prealiasing error. Additionally, we give a comprehensible clarification that the sampling efficiency of the FCC lattice is lower than that of the BCC lattice. Although this is a well‐known fact, the exact percentage has been erroneously reported in the literature. Furthermore, for the sake of an unbiased comparison, we propose to rotate the Marschner‐Lobb test signal such that an undue advantage is not given to either lattice.     

Robust Treatment of Degenerate Elements in Interactive Corotational FEM Simulations

We address the problem of robust and efficient treatment of element collapse and inversion in corotational FEM simulations of deformable objects in two and three dimensions, and show that existing degeneration treatment methods have previously unreported flaws that seriously threaten robustness and physical plausibility in interactive applications. We propose a new method that avoids such flaws, yields faster and smoother degeneration recovery and extends the range of well‐behaved degenerate configurations without adding significant complexity or computational cost to standard explicit and quasi‐implicit solvers.     

Scalable Realistic Rendering with Many‐Light Methods

Recent years have seen increasing attention and significant progress in many‐light rendering, a class of methods for efficient computation of global illumination. The many‐light formulation offers a unified mathematical framework for the problem reducing the full lighting transport simulation to the calculation of the direct illumination from many virtual light sources. These methods are unrivaled in their scalability: they are able to produce plausible images in a fraction of a second but also converge to the full solution over time. In this state‐of‐the‐art report, we give an easy‐to‐follow, introductory tutorial of the many‐light theory; provide a comprehensive, unified survey of the topic with a comparison of the main algorithms; discuss limitations regarding materials and light transport phenomena and present a vision to motivate and guide future research. We will cover both the fundamental concepts as well as improvements, extensions and applications of many‐light rendering.     

Preparation and structural characterization of Co/Al2O3 catalysts for the ozonation of pyruvic acid

A series of Co/Al₂O₃ catalysts were prepared by the incipient wetness impregnation method using γ-Al₂O₃ support and (CH₃COO)₂Co·4H₂O solutions, followed by calcination at 500–800 °C. Characterization of catalysts was accomplished by several techniques such as thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), physisorption of nitrogen, mercury and helium-based pycnometries, Fourier transform-infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and pH of zero charge (PZC). Impregnation of support produced a moderate decrease of its surface area and pore volume and also led to minor changes of its PZC. Depending on preparation conditions (i.e., calcination atmosphere and temperature and metal loading), one or more of the following Co-containing compounds were identified: CoO, Co₃O₄ and CoAl₂O₄. The support and prepared Co/Al₂O₃ catalysts were tested to catalyze the ozonation of aqueous pyruvic acid at pH 2.5. Pyruvic acid was shown refractory towards single ozonation but the use of γ-Al₂O₃ and Co/Al₂O₃ catalysts resulted in 56–96% pyruvic acid conversion and 41–78% decrease in DOC after 2 h of ozonation of phosphate-buffered solutions. In the absence of the buffer, conversion rate was enhanced likely as a result of pH increase during the course of the process thus giving rise to the indirect way of ozonation through hydroxyl radicals. Acetic acid was found as the main by-product of pyruvic acid ozonation. Depending on the catalyst used, yield of acetic acid varied from 32 to 49%, values noticeably lower that that obtained from the control non-catalytic ozonation experiment (73%). Differences in catalytic activity amongst the various Co/Al₂O₃ catalysts investigated were attributed to the different Co active phases deposited on the γ-Al₂O₃ surface. The following sequence of increasing activity can be inferred from experimental results: CoO, CoAl₂O₄ and Co₃O₄. All the Co/Al₂O₃ catalysts prepared showed good stability as the percentage of cobalt leached out was rather low.     

n-Butane Isomerization Over SO4 =/NiO/Al2O3/ZrO2 Catalysts. Effect of the Reaction Pressure and Metal Loading

The effect of alumina and nickel in sulfated ZrO₂ as a catalyst for n-butane isomerization was investigated. Samples were synthesized by supporting nickel sulfated zirconia on boehmite and then calcining the material. The crystalline structure of ZrO₂ was studied by X-ray powder diffraction and refined by the Rietveld method. Surface areas were determined by N₂ adsorption and BET analysis, while the acid properties were studied by NH₃ adsorption. The chemical reaction was carried out in a fixed-bed microreactor at 338 K under atmospheric (78 kPa) or 245 kPa total pressure. Results showed that either nickel or alumina improved the catalytic activity, but a synergic effect was observed when both components assisted. The catalytic activity was related to the relative content of tetragonal zirconia and acid site density. Alumina stabilized tetragonal zirconia increased the acid site density and presumably led to a better dispersion of nickel oxide. The catalytic activity could be related to both oxidation and acid sites produced by nickel. A bimolecular reaction mechanism helps explain the observed trends. The increase in the reaction rate would be explained by the increase in the rate of the initial step of dehydrogenation either caused by a better dispersion of nickel or higher operating pressure.     

Composition of phospholipids of white muscle of six tuna species

A comparative study of the phospholipids of white muscle of six of the comercially utilized tuna species, including quantitative analyses of phospholipid classes and studies of the acyl composition of the major components. Plasmalogen compounds also were identified and quantified. Choline and ethanolamine glycerophospholipids were the most abundant classes in all the samples, as well as the only molecules containing plasmalogens (16∶0, 18∶0, and 18∶1 alkenyl ether chains). The patterns of fatty acid distribution within each of the phospholipid classes showed general similarities in the species analyzed. However, ratios between certain saturated and polyunsaturated fatty acids in different phospholipid classes showed remarkable diffences. The high content of n−3 polyunsaturated fatty acids in the principal phospholipids, such as the plasmalogens, and taking into account the fatty acids possible importance in human nutrition, indicates that the white muscle of tuna species may be a potentially important dietary item.     

AN EXPERIMENTAL STUDY OF METHANE OXIDATIVE COUPLING IN FIXED BED REACTORS WITH A DISTRIBUTED OXYGEN FEED

Methane oxidative coupling has been carried out in a reactor with a distributed oxygen feed. The system consists of a catalytic bed of Li/MgO in a quartz reactor with one inlet for methane and one or more inlets for oxygen. To enable the comparison between the co-fed mode and the distributed feed mode, an especial experimental design was used in order to maintain the same contact time in the co-fed and in the distributed feed modes, and in order to minimize the temperature gradients caused by the exothermic oxidation process. The results clearly show that a distributed oxygen feed may give rise to significant increases in the hydrocarbon selectivity obtained at a given methane conversion,     

Heterogeneous asymmetric reactions. 23. Enantioselective hydrogenation of ethyl pyruvate over cinchonine- and α-isocinchonine-modified platinum catalysts

The enantioselective hydrogenation of ethyl pyruvate to (S)-ethyl lactate over cinchonine- and -isocinchonine-modified Pt/Al₂O₃ catalysts was studied as a function of modifier concentration and reaction temperature. The maximum enantioselectivities obtained under the applied mild conditions were 89% ee using cinchonine (0.014 mmoldm^–3, 1 bar H₂, 23°C, 6% AcOH in toluene), and 76% ee in the case of -isocinchonine (0.14 mmoldm^–3, 1 bar H₂, –10°C, 6% AcOH in toluene). Since -isocinchonine of rigid structure exists only in anti-open conformation these data provide additional experimental evidence to support the former suggestion concerning the dominating role of anti-open conformation in these cinchona-modified enantioselective hydrogenations.     

Strength Analysis of Self-Supported Films Produced by Aqueous Electrophoretic Deposition

The goal of this work is to study the feasibility of the characterization of the fracture strength of porous alumina/zirconia thin layers by three-point bending and Weibull analysis. Films have been obtained by electrophoretic deposition on graphite and thermo-gelation of the deposit with carrageenan. On sintering, graphite is burned out and self-supported films are obtained. Strength values are well fitted to a simple two-parameter Weibull distribution. The fracture origins are subcritical growth cracks that originated at the surface irregularities associated with the processing method. A Weibull modulus around 3 is obtained.