传统民本论与现代民主的异同

分析了中国传统的民本思想与现代民主思想在权利主体、价值目的、实现方式和经济基础方面存在的本质区别和在重视人民作用、反对统治者专权、专利方面存在的一致性。发展当代中国的民主,应积极培育民众政治参与意识,清除官本位思想,加强法制建设,大力发展市场经济。     

Molten salts/ceramic-foam matrix composites by melt infiltration method as energy storage material

A new type of high temperature energy storage material was obtained through the melt infiltration method, using compounding SiC ceramic foam as matrix and Na₂SO₄ as phase change material. The resulting composite material was measured by XRD, SEM, TG-DSC methods. The experimental results indicate that the composite is composed of silicon carbide, sodium sulfate and square quartz, and no chemical reactions occurs between Na₂SO₄ and SiC matrix. Na₂SO₄ has a good bonding with the SiC ceramic foam matrix. As the composite material is characterized by high thermal energy storage density and high thermal conductivity, it is suit for energy storage under high temperature. Funded by the “863” Hi-Tech Research and Development Program of China (2008AA05Z418)     

厌氧活性污泥PCR-DGGE图谱的优化

针对特种污泥PCR-DGGE图谱的优化一直是微生物分子生态学研究的重点.在反硝化抑制硫酸盐还原菌的研究中,研究厌氧硫酸盐还原污泥和反硝化污泥DNA的提取方法,应用通用引物958F/1401R扩增16S rDNA序列,探讨不同的退火温度对DGGE指纹图谱多样性影响,同时采用时间进程法对DGGE图谱进行优化.结果表明,采用PBS洗涤污泥和超声震荡有利于硫酸盐还原污泥DNA提取;采用958F/1401R为引物时,扩增片段大约500 bp,不同的退火温度对DGGE指纹图谱的多样性影响不显著;采用时间进程法可以很好地再现不同电泳阶段对样品的分离效果,最佳变性剂梯度为40%～60%,在130 V电压下,最佳电泳时间为5 h.     

农村政治学的个案研究方法述评

政治学者进入农村,首选的就是个案研究.从数量来看,可分为单个案和多个案;从时间来看,可分为共时和历时;从范围来看.可分为特殊性和普遍性.在中国本土政治学者进入农村之前,社会学者、人类学者和海外学者早已在农村收获了丰富的理论成果,起步较晚的本土学者一方面学习借鉴了他们的研究方法,另一方面又发展出具有自身学科特色的研究方法.     

A nonlinear control method for the electromagnetic suspension system of the maglev train

To deal with the inherent nonlinearity and open-loop instability of the electromagnetic suspension (EMS) system, a new nonlinear control method is proposed. The simulation results show that, for a PID controller, the overshoot of the system response to an airgap step disturbance is about 3 mm, and the transient time is 6 s; however, for the proposed nonlinear controller, there is no overshoot and transient time within 2 s. The proposed method has a faster response and stronger robustness. With a designed bi-DSP suspension controller, this nonlinear control method was implemented on the Shanghai Urban Maglev Test Line (SUMTL) to validate its effectiveness and feasibility.

     

Discrimination for ablative control mechanism in solid-propellant rocket nozzle

The ablation in solid-propellant rocket nozzle is a coupling process resulted by chemistry, heat and mass transfer. Based on the heat and mass transfer theory, the aero-thermo-dynamic, and thermo-chemical kinetics, the thermal-chemical ablation model is established. Simulations are completed on the heat flow field and chemical ablation in the nozzle with different concentrations, frequency factors and activation energy of H2. The calculation results show that the concentration and the activation energy of H...     

Transitions from solid to liquid in isotactic polystyrene studied by thermal analysis and X-ray scattering

A three-phase model, comprising mobile amorphous fraction (MAF), rigid amorphous fraction (RAF) and crystalline fraction (C), has been applied to interpret the thermal transitions and structure of cold-crystallized isotactic polystyrene (iPS) from below the glass transition temperature, T_g, to above the melting point. Quenched amorphous iPS films were isothermally crystallized at different temperatures for 12 h. The fraction of crystalline phase, ?_c, was measured by differential scanning calorimetry (DSC), wide angle X-ray scattering and Fourier Transform infrared spectroscopy. The fraction of the mobile amorphous phase, ?_MAF, was obtained from the heat capacity increment at the glass transition temperature. In the three-phase model, the fraction of the rigid amorphous phase, ?_RAF, was found from 1−?_MAF−?_c. Specific heat capacity measurements by standard DSC confirm that the experimental baseline heat capacity conforms to a three-phase model for temperatures ranging from below T_g, up to the relaxation of RAF. The relaxation of RAF appears as a sigmoidal change in heat capacity accompanied by excess enthalpy, in which solid-like RAF is converted to an identical amount of liquid-like MAF.At temperatures above the relaxation of RAF, either one or two major crystal melting endotherms are observed in standard DSC, dependent upon crystallization temperature. However, using quasi-isothermal temperature modulated DSC, we always observed two reversing melting endotherms. The effects of annealing on iPS structure during the quasi-isothermal measurement were assessed using small angle X-ray scattering (SAXS). Combining the DSC and SAXS results, a model for the melting of iPS lamellae at low heating rates is presented.     

LogGAN: a Log-level Generative Adversarial Network for Anomaly Detection using Permutation Event Modeling

Information Systems Frontiers - System logs that trace system states and record valuable events comprise a significant component of any computer system in our daily life. Each log contains...     

Analytical investigation on thermal-induced warpage behavior of ultrathin chip-on-flex (UTCOF) assembly

The serious warpage issues of ultrathin chip-on-flex (UTCOF) assembly induced by mismatched thermal stresses have greatly affected the mechanical stability and reliability of emerging ultrathin chip packaging technology. Currently, a theoretical prediction as a convenient and straightforward approach is still lacked for describing effectively the thermal-mechanical behavior of UTCOF during the adhesive curing and cooling process. In consideration of the adhesive thickness approximating to ultrathin chip and flexible substrate thickness, we develop a layerwise-model of ultrathin chip-adhesive-flex structure under plain strain condition, where the behavior of thick adhesive bonding can be described precisely through increasing the subdivided mathematical plies. Further, the analytical results show that the concave and convex forms of ultrathin chip warpage yield at the end of the curing and cooling process respectively. Meanwhile, the effects of its structure dimensions and material properties are also revealed for discussing a way to relieve the extent of ultrathin chip warpage. Additionally, in order to verify the validity of the theoretical prediction, we also introduce the corresponding numerical technique and experimental method. These results suggest that a kind of rigid and ultrathin flexible substrate such as metal foil should be adopted for small warpage of ultrathin assembly.     

Bone Tissue Response to the Bone-like Tissue Coating on Titanium

The objective of this study was to investigate the effects of mineralized bone nodules, formed in vitro by bone marrow stromal cells(BMSCs), on the new bone formation in bone defect and on implant surface. The mineralized bone nodules were generated by culture of Lewis rats BMSCs on titanium disks in osteogenic induction medium. The gap-healing animal model was used to create the bone defect facing the disk. The titanium disks in the presence of B group or in the absence of NB group bone nodules were randomly placed into one of the rat distal femurs. This self-control design was used to compare the bone formation in defects and on titanium surface, by Micro-CT, fluorescence staining, histological and histomorphometric analysis. The new bone formation parameters in bone defect area of B group were significantly higher than those of NB group at 2 weeks, including bone volume fraction, trabecular thickness and bone area ratio. The bone nodules pre-stained with Alizarin red disappeared mostly at 2 weeks, while the red fluorescence reappeared in the newly formed bone away from the disk surface. For the bone-implant contact, B group showed lower values than NB group at 2 weeks, but no significant difference was found at 4 weeks. Our results indicate that the mineralized bone nodules can be resorbed in vivo and promote the early osteogenesis in the bone defects, and bone nodules may be applicable for new bone generation in bone defect or modification of tissue engineering scaffold.