Effects of growth hormone, insulin-like growth factor-I, and cortisol on periparturient antibody response profiles of dairy cattle

The objectives of this study were to determine hormone and antibody response profiles from the prepartum period to peak lactation, and evaluate potential immunomodulatory effects of the classic endocrine hormones, growth hormone (GH), insulin-like growth factor-I (IGF-I) and cortisol. Specifically, 33 Holstein cows were immunized with ovalbumin (OVA) and Escherichia coli J5 at weeks -8 and -3 prior to parturition. At parturition (week 0), cows received an additional immunization of OVA. Blood was collected at weeks -8, -3, 0, 3 and 6 relative to parturition and various samples were used to determine plasma hormone concentration, serum immunoglobulin (Ig), and specific antibody response to OVA and E. coli. Colostrum and milk samples were also collected post-parturition to monitor local immunoglobulin and antibody responses. Results indicated that not all periparturient cows exhibited depressed immune response, and that antibody response to OVA could be used to partition cows into 3 groups recognizing animals with sustained measurable antibody response before and after parturition (Group 1), animals which responded poorly to immunization at parturition (Group 2), and animals which did not respond to immunizations at week -3 or parturition (Group 3). Cows with the highest antibody response to OVA (Group 1) also tended (P < or = 0.10) to have the highest response to E. coli J5 at parturition and had the lowest incidence of disease, particularly mastitis. Antibody response to OVA measured in milk tended to be higher in Group 1 cows, particularly at week 0 (P < or = 0.06) compared to cows of Group 3. IGF-I was higher (P < or = 0.05) in cows of Group 1 than Group 3 at peak lactation (week 6).     

Crystallization behavior of milk fat,palm oil,palm kernel oil,and cocoa butter with and without the addition of cannabidiol

The objective of this study was to evaluate the effect of cannabidiol (CBD) on the crystallization behavior and physical properties of various fats. Anhydrous milk fat (AMF), palm oil (PO), palm kernel oil (PKO), and cocoa butter (CB) were chosen for this study, for their unique crystallization behaviors. CBD was added at 1 and 2.5% wt/wt to these fats, and the crystallization behavior was evaluated at 26°C for AMF and PO and at 22°C for PKO and CB. Control samples with no CBD were prepared and evaluated as well. Results show that CBD delayed the crystallization of all fats with the least effect observed for the PO. Slight increases in crystal size were observed with the addition of CBD for all samples. CBD did not affect the melting profile of AMF or CB, but it increased the peak temperature of PO and decreased the enthalpy of PKO. Similarly, hardness was only affected by CBD in PO samples, with harder materials obtained for samples containing 2.5% CBD. The same trend was observed for elasticity. In addition, the elasticity of AMF increased with the addition of CBD but not its hardness. Overall, this study indicates that the effect of CBD on fat crystallization is highly dependent on the type of fat used. Producers of fat-based products that are willing to include CBD in their formulations must carefully control processing conditions to ensure product quality.     

Using a Fragment‐Based Approach To Target Protein–Protein Interactions

The ability to identify inhibitors of protein–protein interactions represents a major challenge in modern drug discovery and in the development of tools for chemical biology. In recent years, fragment‐based approaches have emerged as a new methodology in drug discovery; however, few examples of small molecules that are active against chemotherapeutic targets have been published. Herein, we describe the fragment‐based approach of targeting the interaction between the tumour suppressor BRCA2 and the recombination enzyme RAD51; it makes use of a screening pipeline of biophysical techniques that we expect to be more generally applicable to similar targets. Disruption of this interaction in vivo is hypothesised to give rise to cellular hypersensitivity to radiation and genotoxic drugs. We have used protein engineering to create a monomeric form of RAD51 by humanising a thermostable archaeal orthologue, RadA, and used this protein for fragment screening. The initial fragment hits were thoroughly validated biophysically by isothermal titration calorimetry (ITC) and NMR techniques and observed by X‐ray crystallography to bind in a shallow surface pocket that is occupied in the native complex by the side chain of a phenylalanine from the conserved FxxA interaction motif found in BRCA2. This represents the first report of fragments or any small molecule binding at this protein–protein interaction site.     

The Identification of Cyclopenta-Fused and Ethynyl-Substituted Polycyclic Aromatic Hydrocarbons in Benzene Droplet Combustion Products

In order to investigate new aspects of polycyclic aromatic hydrocarbon (PAH) growth and soot formation, we have synthesized special reference standards of cyclopenta-fused PAH (CP-PAH) and ethynyl-substituted PAH. We have identified several of these CP-PAH and ethynyl-PAH in benzene droplet combustion products, using high pressure liquid chromatography (HPLC) and ultraviolet-visible (UV) absorption spectroscopy. Although one CP-PAH identified in these products - acenaphthylene - has previously been identified as a product of a variety of combustion systems, we have identified six additional CP-PAH and two ethynyl-PAH which have never before been unequivocally identified as the products of benzene pyrolysis or combustion: acephenanthrylene, aceanthrylene, cyclopent[hi]acephenanthrylene, cyclopenta[cd]fluoranthene, cyclopenta[cd] pyrene, dicyclopenta[cd, jk]pyrene, 2-ethynylnaphthalene, and 1-ethynylacenaphthylene. We present the corresponding UV absorption spectra obtained from the HPLC analysis of benzene droplet combustion products, and compare them to the UV absorption     

Finding flaws in composites

From ultrasonics, through infrared and thermographic techniques, to more exotic, developmental methods, non-destructive testing (NDT) of composites can take many forms. George Marsh reports on some of the principles and equipment involved in this vital area.     

Intraspecific Variation in Nutritional Composition Affects the Leaf Age Preferences of a Mammalian Herbivore

Ecologists have long been interested in how the nutritional composition of leaves changes as they age, and whether this affects herbivore feeding preferences. As a consequence, the literature abounds with reports that younger leaves contain higher concentrations of nitrogen and plant secondary metabolites (PSMs) than do older leaves. Most of these studies, however, base their conclusions on average values that often mean little to herbivores. We examined this issue in the well-studied marsupial-eucalypt system, using Eucalyptus melliodora and captive common brushtail possums (Trichosurus vulpecula) offered branches from individual trees containing both young and mature leaves. Like many plants, the concentrations of N and PSMs differed among individual E. melliodora. Although young leaves were, on average, “better defended” by the PSM sideroxylonal than were mature leaves, some trees produced leaves that were relatively undefended at both ages. In response, possums chose different proportions of young and mature leaves depending on the chemistry of the individual tree. Possums did not always prefer leaves with lower concentrations of sideroxylonal (mature leaves) or those with higher concentrations of available N (young leaves). Instead, the sideroxylonal concentration of young leaves dictated their choice: possums preferred young leaves with low sideroxylonal concentrations, but not with high concentrations. By skewing their feeding toward trees producing young leaves with low concentrations of PSMs, possums may influence plant fitness. Researchers will detect these potentially important interactions only if they are aware that measuring variation among plants discloses more information than do average relationships.     

On the effect of crystallographic orientation on ductile material removal in silicon

In this work the critical chip thickness for ductile regime machining of monocrystalline, electronic-grade silicon is measured as a function of crystallographic orientation on the (0 0 1) cubic face. A single-point diamond flycutting setup allows sub-micrometer, non-overlapping cuts in any direction while minimizing tool track length and sensitivity to workpiece flatness. Cutting tests are performed using chemically faceted, −45° rake angle diamond tools at cutting speeds of 1400 and 5600 mm/s. Inspection of the machined silicon workpiece using optical microscopy allows calculation of the critical chip thickness as a function of crystallographic orientation for different cutting conditions and workpiece orientations. Results show that the critical chip thickness in silicon for ductile material removal reaches a maximum of 120 nm in the [1 0 0] direction and a minimum of 40 nm in the [1 1 0] direction. These results agree with the more qualitative results of many previous efforts.     

Correcting capacitive displacement measurements in metrology applications with cylindrical artifacts

Metrology applications commonly require non-contact, capacitive sensors for displacement measurements due to their nanometer resolution. In some metrology applications, for example, the measurement of roundness and spindle error motion, the displacements of stationary and rotating cylindrical artifacts are measured. Error from using a conventionally calibrated sensor with a non-flat (e.g., cylindrical) target is typically neglected, but these errors cannot be ignored for nanometer-level accuracy. The capacitance between a sensor and a cylindrical target is less than that of a sensor with a flat target, which causes four effects. As the diameter of the target shrinks, the sensitivity of the sensor increases, the sensing range decreases, the sensing range shifts towards the target, and the nonlinearity increases. These errors can be greatly reduced by either calibrating sensors with the correct target surface or by determining corrections for post-processing data. This paper quantifies and experimentally verifies these errors for a commonly used sensor, and a simulation of a nanometer-level measurement of out-of-roundness and spindle error motion demonstrates that measurement accuracy is improved with corrected sensitivities.     

Adenosyl Radical: Reagent and Catalyst in Enzyme Reactions

Adenosine is undoubtedly an ancient biological molecule that is a component of many enzyme cofactors: ATP, FADH, NAD(P)H, and coenzyme A, to name but a few, and, of course, of RNA. Here we present an overview of the role of adenosine in its most reactive form: as an organic radical formed either by homolytic cleavage of adenosylcobalamin (coenzyme B₁₂, AdoCbl) or by single‐electron reduction of S‐adenosylmethionine (AdoMet) complexed to an iron–sulfur cluster. Although many of the enzymes we discuss are newly discovered, adenosine's role as a radical cofactor most likely arose very early in evolution, before the advent of photosynthesis and the production of molecular oxygen, which rapidly inactivates many radical enzymes. AdoCbl‐dependent enzymes appear to be confined to a rather narrow repertoire of rearrangement reactions involving 1,2‐hydrogen atom migrations; nevertheless, mechanistic insights gained from studying these enzymes have proved extremely valuable in understanding how enzymes generate and control highly reactive free radical intermediates. In contrast, there has been a recent explosion in the number of radical‐AdoMet enzymes discovered that catalyze a remarkably wide range of chemically challenging reactions; here there is much still to learn about their mechanisms. Although all the radical‐AdoMet enzymes so far characterized come from anaerobically growing microbes and are very oxygen sensitive, there is tantalizing evidence that some of these enzymes might be active in aerobic organisms including humans.