HYDRAULIC CHARACTERISTICS OF WATER-WINGS FOR THE MIDDLE-PIER OF A DISCHARGE TUNNEL

1. INTRODUCTION In the design of a discharge tunnel with high water head and large flow, it is important to study the cavitation and the energy dissipation, such as the prevention of cavitation for slots of various gates [1-4], the effects of entrained ai…     

巷道最佳注浆加固时机的分析研究

对松散破碎以及软弱围岩巷道进行注浆加固巷道围岩时,注浆时机的选择对注浆效果具有很大的影响。有效地进行注浆加固的先决条件是浆液能够在围岩中均匀地流动渗透到一定范围,且注浆后能明显提高围岩强度和整体承载能力。在综合考虑围岩裂隙的发育程度、注浆加固体的强度、所需控制的围岩变形量及注浆工艺等因素的基础上,确定了最佳的注浆时机——滞后15d～25d。     

纳米镓/聚甲基丙烯酸甲酯复合材料的原位超声合成与表征

超声作用于低熔点金属镓,使其超细化为纳米级的镓粒子,并采用无引发剂的乳液聚合方法制备出GA/聚甲基丙烯酸甲酯(PMMA)纳米复合粒子,并分析了其微观结构。结果表明纳米镓的形态和结构因有无表面改性剂而不同;乳液聚合得到的纳米镓复合粒子是核壳结构型,粒子大小为50~80 NM,内核金属镓粒径为30~50 NM,与聚合物存在一定的化学作用。     

苏州河河口水闸工程设计特色

在简要介绍苏州河河口水闸工程设计背景及工程概况基础上,从闸址选择、工程标准与规模论证、闸门门型选择、总体结构方案论证、施工组织设计、环境保护、工程效益论证等各方介绍了工程设计特色,并从满足多功能要求基础上介绍了水工、机电与金属结构方面设计存在的难点,从而为今后同类工程设计提供参考。     

EXPERIMENTAL RESEARCH ON RADIATION FROM DOUBLE CYLINDRICAL STRUCTURES

1. INTRODUCTION Induced by unbalanced mechanical forces and moments, underwater structures vibrate and radiate The main form of underwater structures, such a submarine, is reinforced double cylindrical structure immersed in water, with fluid media filled between th double cylindrical shells. In essence, this is a coupling problem between fluid and structure. Multipl methods have been used to estimate radiation leve from underwater structures[1-9]. Musha[10] and Chertock[11] estimate the …     

流量测量准确性的现场验证及其解决方案

流量计示值准确性的现场验证是交工验收的重要内容。介绍了现场校验法，质量平衡法，热量平衡法，设备能力法等流量测量系统的校验方法以及一些技巧。     

Effects of Particle Size of Bulk Drug and food on the Bioavailability of U-78875 in Dogs

The effects of particle size and food on the absolute bioavailability of U-78875 in dogs after oral administration of either a suspension or tablet dosage form were investigated. A reduction of particle size caused a significant increase in bioavailability along with an increase in dissolution rate. Additionally, both suspension and tablet dosage forms administered after food caused an increase in bioavailability. Thus, to accelerate drug dissolution, a reduction of U-78875 particle size from the unmilled state is important for the optimization of formulation compositions. To increase the bioavailability of U-78875, postprandial dosing should be considered.     

Control of Titanium Alloy Thin Plate Welding Distortion by Trailing Peening

The technology of trailing peening is a kind of promisingly bran-new technology which can be used to control weldingstress and distortion of Ti alloy thin plate. Control of TC4 Ti alloy thn plate welding stress and distortion underthe condition of convent     

Nickel and chromium cycles: Stocks and flows project part IV

Nickel and chromium are essential ingredients in alloys increasingly important for energy-efficient, environmentally friendly modern technology. Quantitative assessment of the flows of these metals through the world economy from resource extraction to final disposal informs resource policy, energy planning, environmental science, and waste management. This article summarizes the worldwide technological cycles of nickel and chromium in 2000. Stainless steel is the major use of these metals, but they serve numerous other special needs, as in superalloys for high-temperature service, as plating materials, and in coinage. Because they are used primarily in alloys, novel recycling issues arise as their use becomes more widespread. “... the great New York and St. Louis double track, nickel plated railroad...” — Norwalk, Ohio, Chronicle 10 March 1881 announces arrival of surveyors for the future Nickel Plate Railway “Later [1911] I formed an alloy of Iron and Chromium, which showed remarkable resistance to rust and tarnish ... [It was] rediscovered by an Englishman named Brearley, in 1914.” —Elwood Haynes to Stephen F. Roberts, 17 January 1925     

艺术建筑设计的探索

通过徐州一中艺术楼的设计实践，寻求优美而独特的艺术形象，并用纯几何形体的组合来达到功能与形式的完美统一。