Influence of joint detail on the flexural/torsional interaction of thin-walled structures

For a structure formed from two thin-walled open members connected at 90°, torsion applied to one member can result in torsion as well as flexure in the second member, with the magnitude and direction of this torsion as well as flexure in the second member being determined by the type of joint used. Conventional structural analysis would normally assume the presence of only flexure in the second member. The results from a finite element study of structures formed from thin-walled channel sections connected by box, mitre and stiffened mitre joints is presented and an explanation for the behaviour of the different joint types is given. It is shown that for the box joint the warping deformation of the loaded member is the dominant factor in determining the magnitude and direction of the twisting of the second member, whilst this is determined for the stiffened mitre joint primarily by the St Venant rotation deformation of the loaded member. For the unstiffened joint it is shown that the warping and St Venant rotation deformation effects tend to cancel each other out.     

太钢4号高炉喷煤站应用MFD—Ⅲ型布袋除尘器的实践

太钢４号高炉喷煤站从１９９０年起采用ＭＦＤ－Ⅲ型脉动反吹式布袋除尘器。这种除尘器采用脉动式反吹清灰设施，合理布置布袋间距，布袋支撑骨架及选用针呢材质的布袋，过滤面积大，反吹清灰效果好，设备运行平稳，除尘效率高达９９．８％，排放浓度小于１０ｍｇ／ｍ＾３，故障率低。     

Alkali-metal Na Adsorption and Promoted Oxidation on Si(100)2×1 Surface

The alkali-metal Na adsorption on Si(100)2×1 surface and its promoted oxidation and Si oxidegrowth have been investigated by means of thermal desorption,work function,Auger electronspectroscopy and photoemission electron spectroscopy.The experimental data showed that therewas a new state,interface electron state,near the Fermi level after the deposition of Na atoms.It wasfound that the presence of Na always caused an increase of the oxygen initial uptake whereas thepromotion of Si oxide growth was observed only at the coverage of Na greater than 0.5 ML.A newmechanism of Na-promoted Si oxide growth is suggested in this paper.     

钢管内径光电检测装置

介绍了一种检测细长钢管内径的光电检测装置。该装置利用线阵ＣＣＤ作传感器，采用８０３１单片机作为主控制。     

蒸汽凝结水除油试验研究

介绍了利用类萃取技术进行蒸汽凝结水除油的过程。利用具有亲油功能的HOL-100树脂,经过试验和工业应用证明,萃取除油可以达到1．0mg/L以下,可满足炼油化工装置锅炉用水对含油量的要求。HOL-100树脂具有在高温状态下(120℃)除油的特点。通过标定考核,萃取除油技术是一项节能、节水、环保措施,可在中石油和中石化企业推广应用。     

新型改性有机硅防水剂合成工艺研究

利用丙烯酸系单体对普通有机硅防水剂进行改性,合成一种新型的改性有机硅防水剂。丙烯酸系单体比例为5%～13%,A、B2种表面活性剂复合使用且m(A)∶m(B)=1∶1时,对有机硅的改性效果最好。     

LNG气化站自控仪表系统设计方案探讨

依据LNG存储和气化工艺以及生产管理对自控仪表系统的要求,介绍LNG气化站自控仪表系统设计过程应进行研究的几个主要环节,并对其设计原则及系统结构进行了概述,以满足供气工况的要求。     

一种改进的基于OOC的MWOOC

从理论上分析了一种基于光正交码（OOC）的多波长光正交码（MWOOC）的性能。给出了一种改进的基于OOC的MWOOC，并且蛤体分析了它的性能。与原MWOOC比较，改进的MWOOC的误码率性能基本相同，但码字数增加很多。     

Lattice Effects and Irreversible Magnetoresistance in Gd Doped La—Ca—Mn—O

The Gd substituting effects for La in La0.67Ca0.33MnO3 has been studied .With increasing the substituting amount of Gd,the phase transition temperature of metal-isolator for the samples decreases,the corresponding peak resistivity increases,the Curie temperature decreases monotonically.The substitution of La-Ca-Mn-O with 11% Gd for La improved the magnetoresistance ratio by an order of magnitude.The effects of substituting Gd can be explained in terms of the lattice effects.An irreversible MR behaviour was observed in Gd-substituting compounds.This effect became marked when the substituting amount of Gd was greater than 7%.A maximum irreversible increment of MR ratio as large as 91% was obtained when Gd substituting amount was 11%.     

构造性神经网络在测井岩性识别中的应用

测井岩性识别是石油勘探中十分重要的基础工作,准确的岩性识别结果可以为勘探和开发提供可靠的依据。人工神经网络方法可对复杂的高维数据进行非线性映射,在模式识别领域得到越来越广泛的应用。针对传统的BP神经网络算法存在收敛速度慢、隐层数以及隐层节点数难以确定等缺点,研究了一种构造性神经网络学习算法---级联算法（Cascade Correlation Algorithm,简称CC算法）及其在石油工程中的应用。采用该算法对甘肃镇原-泾川地区进行岩性识别研究,通过与BP神经网络的识别结果进行比较,体现出构造性神经网络的优越性。