Superconductivity in a new quaternary phase with HgSm0.5In0.5Pb2 composition

This work reports a systematic study on the structural and superconducting properties in the Hg-Sm-In-Pb system. It is investigated how In and Sm dopings influence the superconducting properties of the HgPb₂ phase which was recently reported. Results for the HgSm_1 − xPb₂ system show that Sm atoms substitute Hg vacancies in the tetragonal phase which do not affect the onset critical temperature of the HgPb₂ compound. Simultaneous Sm and In doping effects on the properties of the HgPb₂ phase are also studied. Experimental and simulations of X-ray powder diffractograms suggest that the HgSm_1 − xIn_xPb₂ system (0.2 ≤ x ≤ 0.7) has a pseudo-cubic structure with lattice parameters near 4.88 Å. Superconducting properties measurements show that this system has an optimum doping at x ∼ 0.5 with the onset critical temperature close to 6.9 K. This is the highest superconducting critical temperature for the AuCu prototype so far reported.     

Polyamide-6/vegetal fiber composite prepared by extrusion and injection molding

The interest for the use of vegetal fibers as polymers reinforcement has recently increased because of their unique environmental and technological advantages. This work evaluated the use of Curauá fibers in polyamide-6 composites aiming at glass fiber replacement. Fiber content of 20, 30 or 40 wt% and fiber lengths of 0.1 or 10 mm were studied. Fibers were treated with N₂ plasma or washed with NaOH solution, to improve their adhesion to PA-6. Samples with 20 wt% of short or long fibers, with or without pre-treatment, were compounded in two different co-rotating intermeshing twin-screw extruders. These samples were submitted to mechanical and thermal tests. In conclusion, non-dried raw materials improved fiber/matrix interfacial adhesion. Tensile and flexural properties of this composite are better than unfilled, but lower than glass fiber reinforced polyamide-6. However, its impact resistance and heat deflection temperature are similar to the glass fiber reinforced polyamide-6 and its lower density, enable it to replace this latter in specific non-critical applications.     

Genotoxic effect of Physalis angulata L. (Solanaceae) extract on human lymphocytes treated in vitro

Physalis angulata L (Solanaceae) is a medicinal plant from North of Brazil, whose different extracts and infusions are commonly used in the popular medicine for the treatment of malaria, asthma, hepatitis, dermatitis and rheumatism. However, the genotoxic effects of P. angulata on human cells is not well known. The main purpose of the present study was to evaluate the in vitro genotoxic effects of aqueous extract of P. angulata using the comet assay and the micronucleus assay in human lymphocytes provided from 6 healthy donors. Treatments with P. angulata extracts were performed in vitro in order to access the extent of DNA damage. The comet assay has shown that treatments with P. angulata at 0.5, 1.0, 2.0, 3.0 and 6.0 microg/mL in culture medium were genotoxic. Lymphocytes treated with P. angulata at the concentrations of 3.0 and 6.0 microg/mL in culture medium showed a statistically significant increase in the frequency of micronucleus (p<0.05), however, the cytokinesis blocked proliferation index (CBPI) was not decreased after P. angulata treatment. In conclusion, the present work demonstrated the genotoxic effects of P. angulata extract on human lymphocytes in vitro.     

关于影响面条食用品质相关因素的探讨

从小麦生产概况、面条发展历史和工艺、国内外对面条食用品质的研究3个方面,分析了我国面条工业发展缓慢的原因,提出了小麦育种-面粉工业-制面工业,3个环节紧密配合,协调发展,才能形成良性循环的新思路。     

Performance effects of innovative IT applications over time

There is evidence to indicate that the effects of new product and service innovations change over time as a result of learning and competition. However, there have not been any studies of the effects of learning and competition on the impacts of innovative information technology (IT) applications. This paper presents the results of an extensive study of the effects of very early investments in automated teller machines (ATMs) by banks, on market share and overall bank performance. The study spans the period from 1971 to 1984 and includes 2534 banks from across the United States. The results indicate that the impacts of early ATM investments can best be described by exponential and logistic models, indicating that the benefits were very small at first, but increased rapidly after a few years. In addition, the benefits obtained by the earliest adopters were larger than those obtained by the banks that adopted later. These results have important implications for IT investment decisions. The results also suggest that cross-sectional studies, conducted soon after an application is installed, may fail to find benefits even if large benefits are obtained     

Phenotypic analysis of antigen-specific T lymphocytes

Identification and characterization of antigen-specific T lymphocytes during the course of an immune response is tedious and indirect. To address this problem, the peptide-major histocompatability complex (MHC) ligand for a given population of T cells was multimerized to make soluble peptide-MHC tetramers. Tetramers of human lymphocyte antigen A2 that were complexed with two different human immunodeficiency virus (HIV)-derived peptides or with a peptide derived from influenza A matrix protein bound to peptide-specific cytotoxic T cells in vitro and to T cells from the blood of HIV-infected individuals. In general, tetramer binding correlated well with cytotoxicity assays. This approach should be useful in the analysis of T cells specific for infectious agents, tumors, and autoantigens.     

Antibody- and cell-mediated immune responses of Actinobacillus pleuropneumoniae-infected and bacterin-vaccinated pigs

The number involved in and the rate of migration of donor leucocytes into the following recipient organs (spleen, thymus, bone marrow, lung and mesenteric lymph nodes) were measured in two rat models of orthotopic liver transplantation (OLT) using donor-specific MHC class I antibodies. The first OLT model is one that does not require immunosuppression in order to achieve tolerance and involved the transplantation of DA (MHC haplotype, RT1a) livers into PVG (RT1c) recipients. The second model was one that required a 7-day (10 mg/kg) treatment with cyclosporin A (CsA) to achieve tolerance and used DA donors into Lewis (RT1(1)) recipients. Recipient organs were biopsied on days 3, 20 and 87 following OLT and donor leucocyte migration was quantified by immunohistochemistry and computer densitometry of immunoblots of detergent-solublized tissues in order to resolve both membrane-bound and soluble donor MHC class I antigen. In a separate experiment, spleen biopsies were taken following OLT on days 3 and 15 from the naturally tolerizing OLT model (DA into PVG), treated with and without CsA for 7 days and compared with the (DA into Lewis) model. The initial rate of leucocyte migration between days 3 and 21 following OLT was found to be the most rapid into the spleen, followed by the bone marrow and mesenteric lymph nodes in the naturally tolerant (DA into PVG) model when compared with the (DA into Lewis) model. The number of donor leucocytes in the spleen and mesenteric lymph nodes in both models was, however, approximately the same by 87 days. No real difference in the rate of leucocyte migration was seen in the thymus or the lung for both transplant models over the time course assayed. CsA was found to lower the rate of donor leucocyte migration only over the period it was administered. The rate of donor leucocyte migration into the spleen was still much lower 15 days after OLT in the (DA into Lewis) model compared with the (DA into PVG) model treated with and without CsA. Thus the differences in the rate of donor leucocyte migration into the spleen, bone marrow and mesenteric lymph nodes immediately following OLT may offer an explanation as to why the (DA into PVG) combination is able to accept a transplanted liver without immunosuppressive therapy.     

水淬渣罐铸造中支臂及支轴的热节问题分析

分析了钢渣水淬渣罐铸造过程中存在的支臂部位热节处理和支轴部位相对尺寸铸造定位问题。通过改造支臂结构,分散了集中于支臂部位的热节;利用特种模型材料和对支轴的准确定位,解决了支轴部位的相对尺寸精度问题。