Liquid phase sintering and characterization of SiC ceramics

The present study focuses on the sintering of silicon carbide-based ceramics (SiC) by liquid phase sintering (LPS) followed by characterization of the produced ceramics. AlN/Re₂O₃ mixtures were used as additives in the LPS process. In the first step, the LPS-SiC materials were produced in a graphite resistance furnace in the form of discs at different temperatures. The conditions with the best results regarding real density and relative density were taken as reference for sintering in the form of prismatic bars. In the second step, these samples were evaluated regarding fracture toughness (K_IC), by the Single Edge V Notch Beam – SEVNB – method, and flexural strength. K_IC behavior was evaluated according to the depth and curvature radius of the notches. Reliable K_IC values were presented when the ceramic displayed a small curvature radius at the notch tip. When the radius was large, it did not maintain the square root singularity of the notch tip. Tests were carried out to determine K_IC values in atmospheric air and water. K_IC results were lower in water than air, with a decrease ranging between 2.56% and 11.26%. The observations indicated a direct grain size correlation between K_IC values and fracture strength of the SiC ceramics.     

红枣多糖提取、分离纯化及生物活性研究进展

红枣作为我国传统的药食同源的天然保健果品,已有近四千多年的栽植和食用历史。红枣多糖是一种复合杂多糖,现代药理学研究表明多糖是红枣果中主要的功能活性成分之一,具有抗氧化、抗肿瘤、免疫保肝及调节肠道菌群等功能。本文系统地综述了国内外近年来关于红枣多糖提取、分离纯化、结构特征及生物活性的研究进展,以期为提高红枣多糖的利用以及为进一步深入研究红枣多糖构效关系提供理论依据。     

服装新产品市场测试进展

在综合分析研究现状的基础上，以国内的服装行业为研究背景，探讨服装新产品的市场测试方案，文中提出一种基于商店聚类分析的测试方法.     

三峡三期工程大坝混凝土内部温度控制

三峡右岸三期工程施工中,为了有效控制坝体混凝土内部温升,采取了预冷混凝土浇筑、控制混凝土出机口温度及入仓温度,对混凝土内部通水初冷、中冷和后冷等措施,大坝混凝土内部温度没有出现超标现象,混凝土温控工作取得了良好的效果。     

Ru的添加量对FeMn尖晶石的结构 及其氧化性能的影响

 考察了随着FeMn尖晶石催化剂中Ru的添加量的变化以及助剂Cu的加入，催化剂物理结构及化学性质的变化。结果表明，Cu的添加不仅对催化剂的比表面和孔径分布有较大的影响，还对各元素的化学环境有较大的影响。当n(Ru)/n(Mn)为0.05时，由于尚未破坏尖晶石的结构，Ru的存在对于催化剂中其它元素如Mn、Fe和O的化学环境具有较大的影响，当n(Ru)/n(Mn)大于0.15时，尖晶石结构被破坏，Ru含量的增加对于其它元素如Mn、Fe和O的化学环境影响不大，对于比表面积和孔径分布等物理性质也影响很小。所研究的催化剂均可催化氧化醇至醛或酮，Ru的含量越大，催化醇液相氧化性能越好。     

微型轴流风扇噪声特性分析及试验研究

本文对微型轴流风扇噪声的产生机理进行了系统分析及教育处，并进行了实验测试。得出的分析计算结果与实验数据作了比较验证，在声压随观测角度和距离的变化关系上，两者显示出基本一致的趋势。文中以等流量为前提，对降低微型风扇噪声的一种途径作了计算，结果表明采用转轴很细的风扇，可使噪声明显降低（大于3dB）。     

折边锥形封头厚度计算探讨

分析了GB 150-1998《钢制压力容器》中圆筒和折边锥形封头大端的厚度计算公式,认为计算折边锥形封头的厚度时,可只考虑与过渡段相接处的锥壳厚度。     

理想九点五态控制器原理的叙述

用计算的方式叙述理想九点五态控制器的控制原理。为便于人们理解二阶对象的运动中控制的变化过程,将抽象的对象转换为人们熟知的L-R-C电路,通过调节输入电压(即控制作用)的大小和方向来实现对对象性能的调节,并使系统达到理想的性能指标。最后用仿真来验证计算结果的正确性。     

Preparation and characterization of chitosan‐based dispersions

Complexation of chitosan in aqueous solutions by low molecular weight electrolytes is one of the simplest methods for the preparation of aqueous chitosan dispersions. In this work, the influence of storage time, sulfate concentration, method of preparation and surfactant content on some properties of the resultant chitosan dispersions (turbidity, viscosity and zeta potential) was analyzed. Turbidimetry was adequate to monitor the formation of particles, while viscometry was suitable to monitor changes in the dispersing phase. An analysis of the properties of these systems, mainly in terms of particle–particle and macromolecule–macromolecule interactions was carried out. Copyright © 2004 Society of Chemical Industry     

沙漠生物结皮土壤发育特征的研究

通过对沙漠生物结皮层相关的土壤特性研究表明,结皮层不仅具有明显的养分富集和细粒物质的聚集作用,而且结皮层腐殖质成份的含量以及其分子结构和复杂程度也在增加。腐殖质光学特性的变化趋势明显反映了不同地区结皮层土壤发育的地带性特征。结皮层持水量明显高于沙层,并对降水再分配有一定影响。