Retrospective comparison of photorefractive keratectomy and radial keratotomy

BACKGROUND: The efficacy and predictability of photorefractive keratectomy and radial keratotomy become increasingly relevant. This retrospective study compares one surgeon's experience with photorefractive keratectomy and radial keratotomy over a 3-year period from 1990 to 1993. METHODS: Photorefractive keratectomy was performed on 103 eyes of 76 patients that met the inclusion criteria for the phase IIb, phase III, and phototherapeutic keratectomy studies as delineated by the United States Food and Drug Administration. Radial keratotomy was performed on 117 eyes of 81 patients with up to 9.00 diopters (D) of myopia. RESULTS: In the photorefractive keratectomy group, 83% of the eyes achieved uncorrected visual acuity of at least 20/40; 37% saw 20/20; 88% had a refraction within 1.00 D of emmetropia, and 63% within 0.50 D of emmetropia. For the radial keratotomy group, 85% of the eyes achieved an uncorrected visual acuity of 20/40 or better; 27% saw 20/20; 88% had a refraction within 1.00 D of emmetropia; and 55% within 0.50 D of emmetropia. There were no serious complications, and only one single eye in each of the photorefractive keratectomy and radial keratotomy groups lost two lines or more of spectacle-corrected visual acuity. CONCLUSION: Photorefractive keratectomy and radial keratotomy are both effective procedures, and result in similar refractive outcomes for myopia of -1.00 to -9.00 D.     

An analysis of a waveguide T junction with an inductive post

The authors analyze the T junction with an inductive post, taking its diameter into account for the case where the current distribution is assumed on the surface of the post. A single cylindrical post placed in a T junction improves the impedance matching and compensates the junction discontinuity in a wide frequency band. The effects of the design parameters, such as the diameter of the post and its location, are clarified. The measured return loss is accurately predicted. On the basis of this analysis, an effective design procedure for the T junction is proposed, and the reflection below -30 dB is realized over 4% bandwidth     

The effects of leukotrienes C4 and D4 on ciliary activity of human paranasal sinus mucosa in vitro

The effects of leukotrienes C4 and D4 on ciliary activity of human paranasal sinus mucosa were investigated in vitro. Normal mucosa was surgically obtained from human paranasal sinuses and incubated in the form of tissue culture. Ciliated cells were magnified under an inverted microscope, and ciliary activity was photoelectrically measured. LTD4 progressively inhibited ciliary activity, and showed a more potent effect on ciliary activity compared to LTC4. The concentrations of LTC4 and LTD4 in the incubation medium were determined by radioimmunoassay when the mucosa was incubated with 10(-8) M LTC4. The concentration of LTD4 gradually increased and after 90 min reached the maximum of 0.71 x 10(-8) M, while that of LTC4 was reduced to about 10% of its initial concentration within 60 min. These results suggested the possible conversion of LTC4 to LTD4 on the mucosa, and that LTC4 can inhibit ciliary activity by means of LTD4.     

Differential response of arteries and vein grafts to blood flow reduction

BACKGROUND: Because the relative efficacy of antiarrhythmic agents on halothane-epinephrine arrhythmias has not been well characterized, this study was undertaken to comparatively evaluate the antiarrhythmic action of Na(+)-, K(+)- and Ca(2+)-channel blockers on epinephrine-induced ventricular arrhythmias during halothane anesthesia in rats. METHODS: Rats were anesthetized at random with either halothane (1.5%), isoflurane (2.0%), or pentobarbital (50 mg/kg intraperitoneally), and the lungs were mechanically ventilated with oxygen. The rats were studied in three consecutive protocols. Protocol I determined the arrhythmogenic thresholds of epinephrine during the three types of anesthesia in 33 rats. Protocol II determined the arrhythmogenic thresholds of epinephrine during halothane anesthesia in 64 rats receiving saline (control) or one of five antiarrhythmic agents. Protocol III measured the duration of epinephrine-induced arrhythmias during halothane anesthesia in 42 rats receiving saline (control) or one of five antiarrhythmic agents. RESULTS: In protocol I, the arrhythmogenic doses of epinephrine during halothane, isoflurane, or pentobarbital anesthesia were 1.7 +/- 3.2, 11.1 +/- 0.6, and 39.0 +/- 3.9 micrograms/kg, respectively, and the corresponding plasma concentrations were 4.3 +/- 0.8, 103.7 +/- 9.2, and 246.7 +/- 28.9 ng/ml, respectively. In protocol II, the arrhythmogenic doses were similar in rats receiving saline and in those receiving lidocaine. The arrhythmogenic doses in rats receiving verapamil, flecainide (Na(+)- and K(+)-channel blocker), E-4031 (K(+)-channel blocker), or amiodarone(K(+)-channel blocker with Na(+)-, Ca(2+)-, and beta-blocking activity) increased significantly, i.e., 4.2, 4.2, 5.5, and 31.7 times control (P < 0.01). In protocol III, lidocaine had no effect on the duration of arrhythmias. Flecainide, E-4031, and verapamil markedly reduced the duration of arrhythmias induced by epinephrine, 8 micrograms/kg intravenously (P < 0.01), whereas only amiodarone markedly reduced the duration of arrhythmias induced by epinephrine, 16 micrograms/kg intravenously (P < 0.01). CONCLUSIONS: It was concluded that agents with K(+)-channel blocking properties were the most effective in preventing halothane-epinephrine arrhythmias in rats.     

Endgroup analysis of polyethylene glycol polymers by matrix-assisted laser desorption/ionization Fourier-transform ion cyclotron resonance mass spectrometry

Fourier-transform ion cyclotron resonance mass spectrometry (FTICR-MS) by external injection of matrix-assisted laser desorbed and ionized (MALDI) polymers offers good possibilities for characterization of low molecular weight homopolymers (MW range up to 10 kDa). The molecular masses of the molecular weight distribution (MWD) components of underivatized and derivatized (dimethyl, dipropyl, dibutyl and diacetyl) polyethylene glycol (PEG) 1000 and 4000 were measured by MALDI-FTICR-MS. These measurements have been performed using a commercial FTICR spectrometer with a home-built external ion source. MALDI of the samples with a 2,5-dihydroxybenzoic acid matrix in a 1000:1 matrix-to-analyte molar ratio produces sodiated molecules in a sufficient yield to trap the ions in the ICR cell. The masses of the molecular weight distribution of PEG components were measured in broad-band mode with a mass accuracy of < 5 ppm in the mass range around 1000 u and within 40 ppm accuracy around 4000 u. From these measurements, the endgroup mass of the polymer was determined by correlation of the measured component mass with the degree of polymerization. The masses of the PEG endgroups have been determined within a deviation of 3-10 millimass units for the PEG1000 derivatives and 10-100 millimass units for the PEG4000 derivatives, thus confirming the identity of the distal parts of the model compounds.     

Fabrication of damascene Cu wirings using solid acidic catalyst

The copper damascene process is one of the most promising technologies for fabricating Cu wirings for electronic devices such as LSIs. In this research, the fabrication of damascene Cu wirings was conducted using solid acidic catalyst. When a Cu-plated wafer, whose oxide is a basic oxide is dipped into a mixture of oxidizing solution and acidic solution, surface atoms are ionized and etched off into the solution. However, because conventional nonelectrolytic etching does not have a reference surface, it is difficult to utilize for planarization. Therefore, a new nonelectrolytic machining method using a cation-exchange fabric instead of an acidic solution was developed. To be more precise, the planarization of a Cu-plated wafer was carried out by rubbing with the cation-exchange fabric in ozone water. Basically, this method exploits chemical reactions so that the physical properties of the workpiece surface are not deteriorated. Furthermore, this method uses no chemicals except for ozone water, which easily dissociates into water and oxygen molecules; thus, this method is a low-cost, environmentally friendly process. In this paper, as a preliminary experiment, the nonelectrolytic etching of a Cu sample using solutions of O₃ and CO₂ was carried out to inspect the dependence of the etching rate on [O₃] and [H⁺]. The results indicate that the etching rate increased as [O₃] and [H⁺] increased. When [H⁺] was high relative to [O₃], a smooth etch-pit-free surface was achieved. Next, nonelectrolytic etching using a cation-exchange fabric was carried out, and properties similar to those in the case of etching using solutions were obtained. Finally, damascene Cu wirings were fabricated using ozone water and a cation-exchange catalyst.     

Monoclonal antibody-based competitive ELISA for simultaneous detection of rinderpest virus and peste des petits ruminants virus antibodies

An experimental competitive enzyme-linked immunosorbent assay (morbillivirus cELISA) using a recombinant N antigen (rRPV N) expressed in a baculovirus and a ruminant morbillivirus (RPV and PPRV)-specific monoclonal antibody (P-13A9) was developed for simultaneous detection of rinderpest virus (RPV) and peste des petits ruminants virus (PPRV) antibodies and its diagnostic performance was evaluated. A set of known reference antisera against RPV and PPRV belonging to different lineages, experimental sera from cattle vaccinated for a RPV of Asian lineage, and field sera from cattle and sheep/goat populations known to be positive (West Africa) and negative (Korea) for RPV and PPRV were used for the evaluation. Morbillivirus cELISA results on the panel of experimental RPV and PPRV antisera showed high correlation (r=0.97) between the whole virus and the rRPV N antigens, suggesting that the rRPV N contains a ruminant morbillivirus-specific antigenic determinant recognized by the P-13A9 and it may be suitable as an ELISA antigen in place of the whole virus. Morbillivirus cELISA detected anti-RPV and anti-PPRV antibodies in all reference RPV and PPRV antisera containing VN titers >/=1:8, suggesting that the assay can simultaneously detect antibodies against RPV and PPRV. Anti-RPV antibody was detected by morbillivirus cELISA in vaccinated cattle as early as the VNT and continued to be detectable by both the cELISA and the VNT until termination of the study. When applied to field samples from Africa, morbillivirus cELISA showed good agreement with a RP cELISA kit (kappa value of 0.86) in bovine sera and with a peste des petits ruminant cELISA kit (kappa value of 0.81) in caprine/ovine sera. Usefulness of morbillivirus cELISA using the rRPV N protein was discussed.     

FDTD analysis of switching characteristics in magnetooptic functional devices using magnetostatic surface waves

Collinear magnetooptic interaction with magnetostatic surface waves (MSSW) can be used for wavelength‐selective switches, wavelength filters, and frequency shifters in wavelength‐division‐multiplexed (WDM) photonic networks and optical processing systems. The switching efficiency can be improved with a multilayer waveguide structure. To investigate the dynamic switching characteristics, the FDTD method was employed. The mode conversion between TE and TM mode was successfully demonstrated with FDTD simulation. The filtering characteristics were also evaluated. The FDTD results were compared with the result from the coupled mode theory, and good agreement was obtained. Switching of an optical pulse was also demonstrated by the FDTD method. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 162(1): 40–47, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20501     

Dual role of alpha-acetolactate decarboxylase in Lactococcus lactis subsp. lactis

The alpha-acetolactate decarboxylase gene aldB is clustered with the genes for the branched-chain amino acids (BCAA) in Lactococcus lactis subsp. lactis. It can be transcribed with BCAA genes under isoleucine regulation or independently of BCAA synthesis under the control of its own promoter. The product of aldB is responsible for leucine sensibility under valine starvation. In the presence of more than 10 microM leucine, the alpha-acetolactate produced by the biosynthetic acetohydroxy acid synthase IlvBN is transformed to acetoin by AldB and, consequently, is not available for valine synthesis. AldB is also involved in acetoin formation in the 2,3-butanediol pathway, initiated by the catabolic acetolactate synthase, AlsS. The differences in the genetic organization, the expression, and the kinetics parameters of these enzymes between L. lactis and Klebsiella terrigena, Bacillus subtilis, or Leuconostoc oenos suggest that this pathway plays a different role in the metabolism in these bacteria. Thus, the alpha-acetolactate decarboxylase from L. lactis plays a dual role in the cell: (i) as key regulator of valine and leucine biosynthesis, by controlling the acetolactate flux by a shift to catabolism; and (ii) as an enzyme catalyzing the second step of the 2,3-butanediol pathway.