Exploring the genetic and environmental etiology of high general cognitive ability in fourteen- to thirty-six-month-old twins

Two definitions of normality ("isolated" or "correlated") are considered. The boundaries of "isolated" normality were determined by a statistical procedure, whereas the "correlated" approach was related to a clinical or predictive definition. In the latter case, the biological variations were considered abnormal if they implied a hazard with some significant future ailment as a risk factor. In this pragmatic approach, the upper limit of normal/abnormal variations is the point beyond which medical strategy is related to the most expected benefit when applied to a definite population or to an individual patient. The capacity of a diagnostic test to discriminate between patients with a defined risk and those without risk depends strictly on the value of the parameter chosen. In medical care for the prevention of vascular complications in diabetic patients or with foetal risks in pregnant women, the limits of the so-called normal range of glycaemia and other parameters should be determined according to the objective of the preventive and/or therapeutic measures to be prescribed.     

A lumped-parameter model to investigate the effect of plantar pressure on arterial blood flow in a diabetic foot

This paper presents a lumped-parameter model for the big-toe region that investigates the effect of plantar pressure on the diameter of the blood vessels, specifically the arteries, in the presence of arterial and/or tissue changes. The model developed in this paper uses a multi-domain energy system approach to develop the lumped-parameter differential equations. Blood flow is modelled as fluidic flow through compliant pipes that have inertia, stiffness, and damping. The tissue material is treated as a soft compliant material that transmits the external force to the blood vessels. Conclusions have been drawn to show the effect of plantar pressure, tissue damage, and their combination on the diameter of the blood vessels. The principles used here can be used to model the entire foot and the model used to investigate the effect of plantar pressure, tissue damage, and arterial changes on different parts of the foot. The work presented here may also have applications in other vascular diseases.     

Prophylactic efficacy of tilmicosin for bovine respiratory tract disease

The prophylactic administration of injectable tilmicosin for pneumonia in weaned beef calves was investigated in 1,806 animals. Comparisons were made among calves receiving an "on-arrival" injection of tilmicosin, calves receiving a single injection of long-acting oxytetracycline, and calves receiving no prophylaxis. Morbidity and mortality attributable to pneumonia, morbidity and mortality attributable to all causes, and case fatality were significantly lower in the group of calves that received tilmicosin, compared with calves that received long-acting oxytetracycline and calves that received no prophylactic antibiotic. Mean time to initial pneumonia treatment was significantly extended in calves that received prophylaxis, compared with those that received no antibiotic on arrival at the feedlot. Calves that received tilmicosin gained significantly more weight than calves that received oxytetracycline. Calves that were not treated for pneumonia during the trial period gained significantly more weight than did those calves that were treated for pneumonia regardless of experimental group. The majority of mortalities were attributable to fibrinous pneumonia (31/34). Important bacterial isolates (Pasteurella spp, Haemophilus somnus, Actinomyces pyogenes) obtained at necropsy did not have resistance to tilmicosin in association with administration of tilmicosin as prophylaxis for pneumonia. However, bacterial resistance to trimethoprim/sulfonamide and to oxytetracycline were commonly found in these postmortem isolates.     

Comparison of technetium-99m-ECD to Xenon-133 SPECT in normal controls and in patients with mild to moderate regional cerebral blood flow abnormalities

Technetium-99m-1,1-ethyl cysteinate dimer (ECD) has been proposed as a "chemical microsphere" for SPECT measurement of regional cerebral blood flow (rCBF). However, its distribution has not yet been compared in humans to an established rCBF measure. Therefore, we compared the uptake and distribution of ECD with rCBF measured by 133Xe SPECT in subjects with mild to moderate flow abnormalities and in normal volunteers. Blood and urine chemistries and vital signs were unchanged from pre-ECD values up to seven days postinjection. Profile plots demonstrated pattern agreement between rCBF ratios (133Xe) and ECD count density ratios. A significant correlation of rCBF ratios to ECD count density ratios was observed (r = 0.77), with a slope of 0.64 and intercept of 0.36. To explore whether or not the relationship between rCBF and ECD was dependent on absolute flow, ECD region of interest data were expressed in units of ml/min/100 g by equating global CBF (133Xe) and ECD global count density. A closer correlation (r = 0.88) was found for these data than for the count ratio data. The slope was closer to one (m = 0.83) and the intercept was closer to zero (b = 8.2). Also, a significant correlation was observed between ECD-derived rCBF and 133Xe rCBF in the lesion area (r = 0.92) for patients with well-demarcated rCBF lesions. The slope (0.80) suggested a slight underestimation of lesion flow by ECD. Finally, ECD clearance from cortical gray matter ROIs derived from high-resolution scans from 1 to 4 hr postinjection was slow (2.4%/hr). In summary, ECD is a safe and effective marker of regional cerebral perfusion. The distribution of ECD is linearly related to rCBF measured by 133Xe SPECT, although our data suggest a mild underestimation of flow at the high end of the normal range.     

Creep fracture in Al-SiC metal-matrix composites

Creep fracture behaviour of pure aluminium-matrix composites with 10–30 vol% SiC particulates at 623 K is reported. A comparison of tensile and compression creep data shows the existence of a transition stress. Above this transition stress no steady state creep is observed in tension. This transition stress is related to a transition from intergranular to transgranular fracture. The origin of transition stress is perhaps associated with the diffusional relaxation of stress concentration at the matrix/particle interface by lattice diffusion. The intergranular creep fracture of composites appears to be similar to that of unreinforced aluminium and it is power-law creep controlled. The transgranular creep fracture occurs by void nucleation and growth. The nucleation strain for voids is quite small and hence the tertiary stage starts before the end of the primary stage. The ductile fracture models overestimate the strain to fracture and do not predict the observed stress dependence of strain to fracture.     

Counting Paths in VPA Is Complete for #NC 1

We give a #NC ¹ upper bound for the problem of counting accepting paths in any fixed visibly pushdown automaton. Our algorithm involves a non-trivial adaptation of the arithmetic formula evaluation algorithm of Buss, Cook, Gupta and Ramachandran (SIAM J. Comput. 21:755?C780, 1992). We also show that the problem is #NC ¹ hard. Our results show that the difference between #BWBP and #NC ¹ is captured exactly by the addition of a visible stack to a nondeterministic finite-state automaton.     

Study of physicochemical properties of flutamide-loaded Ocimum basilicum microspheres with ex vivo mucoadhesion and in vitro drug release

Drug which shows extensive first pass effect is difficult task that, needs to be solved by formulators in the pharmaceutical science. The low oral bioavailability (49%) of flutamide may be due to poor wettability, low aqueous solubility and extensive first pass effect. The aim of present investigation was to prepare flutamide loaded microspheres and incorporate it into suppositories for rectal delivery to avoid first pass effect and enhance residence time. Flutamide loaded mucoadhesive microspheres of Ocimum Basilicum mucilage (OBM) were prepared using spray drying and characterized by percent production yield, encapsulation efficiency, particle size, zeta potential, polydispersity index, DSC, SEM, XRPD, in vitro drug release and stability studies. Moreover, ex vivo mucoadhesion was investigated using falling liquid film technique to determine the adhesion of microspheres to sheep rectal mucosa. The microspheres had nearly spherical shape and size about 2.53?μm. The encapsulation efficiency and mucoadhesion of optimized formulation MBF10 were found to be 69.6?±?2.3% and 89.01?±?2.18%, respectively. Percent CDR of optimized flutamide loaded mucoadhesive microspheres was found to be 88.7?±?1.3 at 7?h. In conclusion, OBM microparticles based suppository could be used to deliver drug through rectal delivery.     

Analysis of a SiGe MOSFET at 22nm

The present paper proposes a novel concept which can successfully reduce threshold voltage and increase switching speed of a conventional MOSFET. The proposed structures have been incorporated with a silicon germanium (SiGe) layer as a channel at the 22 nm technology node. Also, extensive analyses have been done to study the effects of replacing conventional polysilicon by graded dopent profile polysilicon, use of a high-k/silicon dioxide stack as a dielectric with graded dopent profile polysilicon and by using a high-k/silicon dioxide stack as a dielectric with a metal gate. Hafnium dioxide is used as a high-k material. Silvaco Athena and Atlas simulators are used for simulation as well as for finding electrical characteristics of the structures. For all the proposed structures two important parameters are studied in detail, threshold voltage and subthreshold slope. Comparing the three structures, it can be seen that using the high-k/silicon dioxide stack as a dielectric with a metal gate yields the best threshold voltage as well as good subthreshold slope which is directly related to the switching behaviour of the device. The required fabrication aspects of the modelled structures are also elaborated in detail.