Increased socioeconomic differences in mortality in eight Spanish provinces

In Spain, the study of socioeconomic differences in mortality has been limited by the fact that death certificates often do not include complete information on occupation. In this study, we chose those geographic areas with the highest quality information on occupation of the deceased in order to study socioeconomic differences in mortality from various causes of death. We used information from the death certificates of males who died between 30 and 64 years of age in eight Spanish provinces to compare mortality from the leading causes of death in professionals and managers (group I) and in manual laborers (group II) in 1980-82 and 1988-90. In each period the standardized mortality ratios (SMRs) were higher in group II, except for ischaemic heart disease during the first period, and cancer of the colon and rectum in both, although in the latter case the differences were not statistically significant. The ratio between the SMR from all causes in group II and group I was 1.27 in 1980-82, and 1.72 in 1988-90; for cancer of the colon and rectum the ratio went from 0.98 to 0.84, and for ischaemic heart disease, from 0.80 to 1.31. Except for cancer of the colon and rectum, which resulted in higher mortality in occupational group I, the excess mortality in occupational group II increased between the first and second period. The relation between socioeconomic level and mortality for ischaemic heart disease was reversed, a phenomenon similar to that which took place in the 1960s and 1970s in the developed countries.(ABSTRACT TRUNCATED AT 250 WORDS)     

Effect of chromium on the mechanical properties of powder-processed Fe–0.45 wt.% P alloys

The present investigation shows the role of chromium in Fe–P binary and Fe–P–Cr ternary alloys. The compositions are characterized in terms of microstructure, porosity content, hardness and tensile properties. The alloys were made using a hot powder forging technique. In this process mild steel encapsulated powders were hot forged into slabs. Then the slabs were hot rolled and annealed to relieve the residual stresses. Densifications as high as 98.9% of theoretical density have been realized. Microstructures of these alloys consist of single-phase ferrite only. Both Fe–0.45P and Fe–0.45P–3Cr alloys showed very high strength. As forged and hot rolled Fe–0.45P alloy showed low elongation. It was observed that, the addition of Cr to Fe–P based alloys caused an increase in strength associated with the reduction in ductility. Alloys developed in the present investigation were capable of hot working to very thin gage of sheets and wires.     

Temperature dependence of the relaxation resonance frequency of long-wavelength vertical-cavity lasers

The temperature dependence of the differential gain in AlInGaAs 1310-nm vertical-cavity lasers is investigated. The variations in differential gain and in relaxation resonance frequency are shown to depend on the room-temperature offset between the gain peak wavelength and the wavelength of the lasing mode. The tradeoff between high modulation bandwidth and good high-temperature performance for vertical-cavity lasers is analyzed. A cavity mode that is red-shifted about 25 nm from the gain peak is shown to minimize the variation in modulation bandwidth with temperature, and simultaneously allow for satisfactory high-temperature operation. Experimental results are presented and compared to calculated results with excellent agreement. Because of the change in gain-mode offset with internal temperature, the measured modulation current efficiency changed from about 2 to 4.8 GHz/mA/sup 1/2/ for an increase in drive current from 2 to 10 mA.     

A Backdrop Case Study of AI-Drones in Indian Demographic Characteristics Emphasizing the Role of AI in Global Cities Digitalization

The automatic identification of the modulation format of a detected signal is a major task of an intelligent receiver in both military and civilian applications. It is well known that the maximum likelihood (ML) classifier requires a priori knowledge of the incoming signal and channel (including amplitude, timing information, noise power, and the roll-off factor of the pulse-shaping filter). To relax this requirement, we introduce a novel estimator to estimate the parameters required by the ML classifier which is blind to the modulation scheme of the received signal, and this gives rise to a new blind modulation classifier for digital amplitude-phase modulated signals. While the proposed classifier is completely blind, the simulation results show that the performance of this classifier is very close to the optimal non-blind classifier.

     

High-power 1320-nm wafer-bonded VCSELs with tunnel junctions

A new long-wavelength vertical-cavity surface-emitting laser structure is described that utilizes AlGaAs-GaAs mirrors bonded to AlInGaAs-InP quantum wells with an intracavity buried tunnel junction. This structure offers complete wavelength flexibility in the 1250-1650 nm fiber communication bands and reduces the high free-carrier losses and bonded junction voltage drops in previous devices. The intracavity contacts electrically bypass the bonded junctions to reduce threshold voltage. N-type current spreading layers and undoped AlGaAs mirrors minimize optical losses. This has enabled 134/spl deg/C maximum continuous-wave lasing temperature, 2-mW room-temperature continuous-wave single-mode power, and 1-mW single-mode power at 80/spl deg/C, in various devices in the 1310-1340 nm wavelength range.     

Transient-enhanced diffusion in shallow-junction formation

Shallow junctions are formed in crystalline Si by low-energy ion implantation of B⁺, P⁺, or As⁺ species accompanied by electrical activation of dopants by rapid thermal annealing and the special case of spike annealing. Diffusion depths were determined by secondary ion-mass spectroscopy (SIMS). Electrical activation was characterized by sheet resistance, Hall coefficient, and reverse-bias diode-leakage measurements. The B⁺ and P⁺ species exhibit transient-enhanced diffusion (TED) caused by transient excess populations of Si interstitials. The electrically activated fraction of implanted dopants depends mainly on the temperature for B⁺ species, while for P⁺ species, it depends on both temperature and P⁺ dose. The relatively small amount of diffusion associated with As⁺ implants is favorable for shallow-junction formation with spike annealing.     

SOAR: Simple Opportunistic Adaptive Routing Protocol for Wireless Mesh Networks

Multihop wireless mesh networks are becoming a new attractive communication paradigm owing to their low cost and ease of deployment. Routing protocols are critical to the performance and reliability of wireless mesh networks. Traditional routing protocols send traffic along predetermined paths and face difficulties in coping with unreliable and unpredictable wireless medium. In this paper, we propose a Simple Opportunistic Adaptive Routing protocol (SOAR) to explicitly support multiple simultaneous flows in wireless mesh networks. SOAR incorporates the following four major components to achieve high throughput and fairness: 1) adaptive forwarding path selection to leverage path diversity while minimizing duplicate transmissions, 2) priority timer-based forwarding to let only the best forwarding node forward the packet, 3) local loss recovery to efficiently detect and retransmit lost packets, and 4) adaptive rate control to determine an appropriate sending rate according to the current network conditions. We implement SOAR in both NS-2 simulation and an 18-node wireless mesh testbed. Our extensive evaluation shows that SOAR significantly outperforms traditional routing and a seminal opportunistic routing protocol, ExOR, under a wide range of scenarios.     

Distributed Dynamic Backhauling in Aerial Heterogeneous Networks

Wireless Personal Communications - A Wireless Mesh Network (WMN) is a multi-hop network that gains the benefits of low deployment cost, fast access speed, expanded service coverage and large...     

A Bluetooth Based Sensor Network for Civil Infrastructure Health Monitoring

Communicating with sensors has long been limited either to wired connections or to proprietary wireless communication protocols. Using a ubiquitous and inexpensive wireless communication technology to create Sensor Area Networks (SANs) will accelerate the extensive deployment of sensor technology. Bluetooth, an emerging, worldwide standard for inexpensive, local wireless communication is a viable choice for SANs because of its inherent support for some of the important requirements – low power, small form factor, low cost and sufficient communication range. In this paper we outline an approach, centered on the Bluetooth technology, to support a sensor network composed of fixed wireless sensors for health monitoring of highways, bridges and other civil infrastructures. We present a topology formation scheme that not only takes into account the traffic generated by different sensors but also the associated link strengths, buffer capacities and energy availability. The algorithm makes no particular assumptions as to the placement of nodes, and not all nodes need to be in radio proximity of each other. The output is a tree shaped scatternet rooted at the sensor hub (data logger) that is balanced in terms of traffic carried on each of the links. We also analyze the scheduling, routing and healing aspects of the resulting sensor-net topology.