The CTFA Evaluation of Alternatives Program: an evaluation of in vitro alternatives to the Draize primary eye irritation test. (Phase III) surfactant-based formulations

The CTFA Evaluation of Alternatives Program is an evaluation of the relationship between data from the Draize primary eye irritation test and comparable data from a selection of promising in vitro eye irritation tests. In Phase III, data from the Draize test and 41 in vitro endpoints on 25 representative surfactant-based personal care formulations were compared. As in Phase I and Phase II, regression modelling of the relationship between maximum average Draize score (MAS) and in vitro endpoint was the primary approach adopted for evaluating in vitro assay performance. The degree of confidence in prediction of MAS for a given in vitro endpoint is quantified in terms of the relative widths of prediction intervals constructed about the fitted regression curve. Prediction intervals reflect not only the error attributed to the model but also the material-specific components of variation in both the Draize and the in vitro assays. Among the in vitro assays selected for regression modeling in Phase III, the relationship between MAS and in vitro score was relatively well defined. The prediction bounds on MAS were most narrow for materials at the lower or upper end of the effective irritation range (MAS = 0-45), where variability in MAS was smallest. This, the confidence with which the MAS of surfactant-based formulations is predicted is greatest when MAS approaches zero or when MAS approaches 45 (no comment is made on prediction of MAS > 45 since extrapolation beyond the range of observed data is not possible). No single in vitro endpoint was found to exhibit relative superiority with regard to prediction of MAS. Variability associated with Draize test outcome (e.g. in MAS values) must be considered in any future comparisons of in vivo and in vitro test results if the purpose is to predict in vivo response using in vitro data.     

Influence of carbon source on nitrate removal by nitrate-tolerant Klebsiella oxytoca CECT 4460 in batch and chemostat cultures

The nitrate-tolerant organism Klebsiella oxytoca CECT 4460 tolerates nitrate at concentrations up to 1 M and is used to treat wastewater with high nitrate loads in industrial wastewater treatment plants. We studied the influence of the C source (glycerol or sucrose or both) on the growth rate and the efficiency of nitrate removal under laboratory conditions. With sucrose as the sole C source the maximum specific growth rate was 0.3 h-1, whereas with glycerol it was 0.45 h-1. In batch cultures K. oxytoca cells grown on sucrose or glycerol were able to immediately use sucrose as a sole C source, suggesting that sucrose uptake and metabolism were constitutive. In contrast, glycerol uptake occurred preferentially in glycerol-grown cells. Independent of the preculture conditions, when sucrose and glycerol were added simultaneously to batch cultures, the sucrose was used first, and once the supply of sucrose was exhausted, the glycerol was consumed. Utilization of nitrate as an N source occurred without nitrite or ammonium accumulation when glycerol was used, but nitrite accumulated when sucrose was used. In chemostat cultures K. oxytoca CECT 4460 efficiently removed nitrate without accumulation of nitrate or ammonium when sucrose, glycerol, or mixtures of these two C sources were used. The growth yields and the efficiencies of C and N utilization were determined at different growth rates in chemostat cultures. Regardless of the C source, yield carbon (YC) ranged between 1.3 and 1.0 g (dry weight) per g of sucrose C or glycerol C consumed. Regardless of the specific growth rate and the C source, yield nitrogen (YN) ranged from 17.2 to 12.5 g (dry weight) per g of nitrate N consumed. In contrast to batch cultures, in continuous cultures glycerol and sucrose were utilized simultaneously, although the specific rate of sucrose consumption was higher than the specific rate of glycerol consumption. In continuous cultures double-nutrient-limited growth appeared with respect to the C/N ratio of the feed medium and the dilution rate, so that for a C/N ratio between 10 and 30 and a growth rate of 0.1 h-1 the process led to simultaneous and efficient removal of the C and N sources used. At a growth rate of 0.2 h-1 the zone of double limitation was between 8 and 11. This suggests that the regimen of double limitation is influenced by the C/N ratio and the growth rate. The results of these experiments were validated by pulse assays.     

The predictors of quality care

Patients' perceptions of quality are important to the performance ratings, financial viability, and operational options afforded to purchasers of health care. Through TRICARE, the Department of Defense provides care for the more than 1.5 million active duty service members charged with the defense of the nation. As patients, these service members are typically incapable of assessing the technical quality of the care they receive. This study examines the attributes of health care delivery that define military patients' perceptions of quality and discusses the implications of these assessments.     

A Multiplex Assay to Assess the Transaminase Activity toward Chemically Diverse Amine Donors

The development of methods to engineer and immobilize amine transaminases (ATAs) to improve their functionality and operational stability is gaining momentum. The quest for robust, fast, and easy-to-use methods to screen the activity of large collections of transaminases, is essential. This work presents a novel and multiplex fluorescence-based kinetic assay to assess ATA activity using 4-dimethylamino-1-naphthaldehyde as an amine acceptor. The developed assay allowed us to screen a battery of amine donors using free and immobilized ATAs from different microbial sources as biocatalysts. As a result, using chromatographic methods, 4-hydroxybenzylamine was identified as the best amine donor for the amination of 5-(hydroxymethyl)furfural. Finally, we adapted this method to determine the apparent Michaelis-Menten parameters of a model immobilized ATA at the microscopic (single-particle) level. Our studies promote the use of this multiplex, multidimensional assay to screen ATAs for further improvement.     

Oxygenated compounds derived from glycerol for biodiesel formulation: Influence on EN 14214 quality parameters

The methyl esters of fatty acids (biodiesel) obtained via transesterification of vegetable oils or animal fats are an alternative to current fossil fuels. A large amount of glycerol as a by-product is generated in this process and new applications for this surplus need to be found. Thus, the transformation of glycerol into branched oxygen-containing compounds could be an interesting solution to provide an outlet for increasing glycerol stocks. In this work, several oxygenated compounds, obtained by transformation of glycerol via etherification, esterification and acetalisation, have been assessed as components for biodiesel formulation. Different quality parameters have been evaluated following the procedures listed in the EN 14214 European Standard for biodiesel specifications. These parameters have been correlated with the amount and chemical nature of oxygenated derivate present in the biodiesel. The best performance as component for biodiesel formulation has been achieved by the mixture of ethers produced via etherification of glycerol with isobutylene. The addition of these compounds has not only improved the low-temperature properties of biodiesel (i.e. pour point and cold filter plugging point) and viscosity, but also did not impair other important biodiesel quality parameters analyzed. Although most of the studied oxygenated derivates do not significantly improve any biodiesel property, they do not exert a significant negative effect either. Furthermore, all of them allow an enhancement of overall yield in the biodiesel production. Nevertheless, further improvement could be addressed with a better purification to reduce the presence of non-desired impurities such as di-isobutylenes and unreacted acetic acid, which have a negative influence especially in acid number and oxidation stability.     

A Comprehensive Study of Particle Size Distributions with the Use of PostInjection Strategies in DI Diesel Engines

Control strategies such as variations in injection pressure and timing have been used by researchers to reduce in-cylinder exhaust emissions and meet legislation standards. Postinjection has been studied for several years and is now well known as an efficient strategy for reducing soot emission. Diesel gaseous and particle mass emissions have been progressively reduced over the last twenty years as a consequence of increasingly restrictive emission legislation and the application of aftertreatment devices. The main objective of this work is to better understand the effect of postinjection on particle size distribution in diesel exhaust. The approach uses a modern, well-instrumented research engine test cell equipped with a flexible high pressure fuel injection system. The results of this work provide guidelines for developing strategies to reduce particle size distribution in diesel engines. A major improvement in particle size distribution was found in the accumulation mode by using a close postinjection of a small quantity of fuel. For reduction in nucleation mode, a relationship was found with close postinjections of large quantities of fuel.