4H-SiC RF power MOSFETs

A 4H silicon carbide lateral RF MOSFET has been fabricated and characterized for the first time. The improved performance of this device was facilitated by a two-metal-layer process, which optimizes the conflicting requirements of acceptable inversion-layer mobility and low contact resistance. The cut-off frequency of the device with 1-μm gate length was in excess of 7 GHz     

Antenna beamwidth independence of measured rain attenuation on a 28-GHz Earth-space path

Rain attenuation measured at 28 GHz on an earth-space path is independent of antenna beamwidth for beamwidths as small as0.1degand for attenuations up to 30 dB. The measurements imply that angle-of-arrival fluctuations are less than0.02deg.     

Measured bounds on rain-scatter coupling between space-earth radio paths

Attempts were made to measure rain-scatter coupling for two satellite paths displaced in angle by0.85deg. For rain attenuation up to 15 dB, upper bounds on coupling were -40 dB at 19 GHz and -45 dB at 28 GHz. These experimental bounds are limited by antenna sidelobe levels which are on the order of 20 dB greater than theoretical rain-scatter predictions.     

Synthesis and characterization of aromatic polyisoimides derived from PMDA and para-diamines. An approach to in situ generated rigid-rod molecular composites

A new concept for the processing and fabrication of rigid-rod molecular composites aiming at the elimination or minimization of phase separation is proposed. This approach calls for a coil-like aromatic polyisoimide which is soluble and compatible with an amorphous matrix polymer or thermosettable oligomer and can undergo facile transformation to the corresponding rigid-rod polyimide in solid composite state, thus imparting the inherently high strength/high modulus properties to the final form. To this end, various synthetic routes were explored to obtain para-diamines which could afford high molecular weight and aprotic-solvent-soluble polyisoimides upon polymerization with pyromellitic dianhydride (PMDA). Four such polyisoimides were prepared, with their inherent viscosities ranging from 0.25 to 1.89 dl g⁻¹ in dimethylacetamide at 30°C. Facile thermally induced isoimide-imide conversion was demonstrated by solid-state (film) Fourier transform infrared spectroscopy. A preliminary evaluation of the compatibility of the polyisoimide/matrix resin was made. In one instance, a film prepared from the polyisoimide derived from PMDA and 3,3′,5,5′-tetramethylbenzidine (TMB) showed no visually detectable phase separation.     

Effect of interface states on electron transport in 4H-SiCinversion layers

The effect of trapping in interface states on channel conductance and field-effect mobility in SiC MOSFETs is studied experimentally and theoretically. Hall effect measurements in n-channel MOS devices with varying densities of interface states were used to determine the effect of trapping on carrier mobility. The dependence of electron mobility on immobile interfacial charge density was quantified and was found to be similar to that in silicon, provided that the mobility is normalized to μ₀, the value in the absence of Coulomb scattering. A relationship has been established between the ratio of field-effect mobility to the actual carrier mobility and the density of interface states at the Fermi energy     

A Generalization of the Blahut–Arimoto Algorithm to Finite-State Channels

The classical Blahut-Arimoto algorithm (BAA) is a well-known algorithm that optimizes a discrete memoryless source (DMS) at the input of a discrete memoryless channel (DMC) in order to maximize the mutual information between channel input and output. This paper considers the problem of optimizing finite-state machine sources (FSMSs) at the input of finite-state machine channels (FSMCs) in order to maximize the mutual information rate between channel input and output. Our main result is an algorithm that efficiently solves this problem numerically; thus, we call the proposed procedure the generalized BAA. It includes as special cases not only the classical BAA but also an algorithm that solves the problem of finding the capacity-achieving input distribution for finite-state channels with no noise. While we present theorems that characterize the local behavior of the generalized BAA, there are still open questions concerning its global behavior; these open questions are addressed by some conjectures at the end of the paper. Apart from these algorithmic issues, our results lead to insights regarding the local conditions that the information-rate-maximizing FSMSs fulfill; these observations naturally generalize the well-known Kuhn-Tucker conditions that are fulfilled by capacity-achieving DMSs at the input of DMCs.     

Micro‐Nanostructured Interfaces Fabricated by the Use of Inorganic Block Copolymer Micellar Monolayers as Negative Resist for Electron‐Beam Lithography

This paper introduces an approach where the match of two different length scales, i.e., pattern from self‐assembly of block copolymer micelles (< 100 nm) and electron‐beam (e‐beam) writing (> 50 nm), allow the grouping of nanometer‐sized gold clusters in very small numbers in even aperiodic pattern and separation of these groups at length scales that are not accessible by pure self‐assembly. Thus, we could demonstrate the grouping of Au nanoclusters in different geometries such as squares, rings, or spheres.     

A new approach to long‐range dependence in variable bit rate video traffic

Recently it has been observed that variable bit rate (VBR) video traffic displays long‐range dependence, which suggests that traditional Markovian models may not be suitable for performance evaluation of telecommunications networks carrying this traffic. Inspection of the bit rate profile of VBR video traffic suggests that shifting level processes might be more appropriate for this task. In this paper we show that a particular class of these processes matches the autocorrelation and bit rate distribution of real VBR video traffic, including exhibiting long‐range dependent behaviour. This revised version was published online in June 2006 with corrections to the Cover Date.     

The E3 architecture: enabling future cellular networks with cognitive and self‐x capabilities

Future mobile networks are expected to be complex heterogeneous systems. On the one hand this will enable users to take advantage of a number of different access technologies. On the other hand it will seriously affect network management procedures since more extensive operations and decisions will have to be dealt with. To tackle these challenges a number of new dynamic mechanisms need to be designed. It is imperative that certain network management tasks have to be performed without human intervention to reduce the OPEX costs and achieve faster responses in different events. To achieve this goal, the introduction of self‐x functionalities, combined with cognitive mechanisms and the ability to reconfigure network entities and terminals, is required. Moreover, the introduction of a new pilot channel needs to be considered to assist the terminals in selecting the most suitable radio access technology according to their requirements. We present the functional architecture of an evolved network that was designed in the context of the EU‐funded IP project ‘E³: End‐to‐End Efficiency’. This architecture aims to enhance existing procedures usually performed in traditional operation and maintenance systems (e.g. spectrum management, network planning, configuration actions). We explain the rationale of our design and provide specific examples to illustrate the role of the different functional entities and their interfaces. A considerable part of this architecture has recently been approved as a feasibility study by the ETSI Committee Reconfigurable Radio System. Copyright © 2010 John Wiley & Sons, Ltd.