Development and evaluation of antimicrobial natamycin‐incorporated film in gorgonzola cheese conservation

Conservation of food products depends on product quality and packaging suitability. The objective of this work was to develop and evaluate the antimicrobial efficiency of natamycin‐incorporated film in the production process of Gorgonzola cheese. It aims to optimize the production process and increase shelf‐life and food safety for the consumer. Films with different concentrations of natamycin were produced and tested in Gorgonzola cheeses to evaluate its efficiency against Penicillium roqueforti on the cheese surface. Films with 2 and 4% natamycin presented satisfactory results for fungus inhibition and the amount of natamycin released to the cheese was below that allowed by the legislation. Copyright © 2006 John Wiley & Sons, Ltd.     

Structure determination of CaMgGeO4

The crystal structure of CaMgGeO₄ is described. CaMgGeO₄, M_r = 200.9, orthorhombic, Pnam, A = 11.285(5) Å, B = 5.016(2) Å, C = 6.435(2) Å, V = 364.36 ų, Dx = 3.664 Mg/m³.λ(MoK_a = 0.71069 Å, F(000) = 384, room temperature, final R = 0.045 for 1752 observed reflections. The structure is isomorphous with CaMgSiO₄ (monticellite).     

Energy efficiency, carbon emissions and economic development in Venezuela

Venezuela's vast natural resource base has largely shaped the nation's economic and energy-use patterns. Major opportunities exist for improving the efficiency of energy use in Venezuela and, consequently, restraining the growth of energy-related carbon emissions. This paper presents a detailed report of one potential development path for Venezuela and estimates the ensuing levels of energy demand and CO₂ emissions associated with pursuing this path through the year 2025. The results indicate that by adopting a development strategy that incorporates structural changes in the economy, fuel-switching measures and improved end-use efficiencies, Venezuela can introduce energy efficiency and carbon restraints as part of its economic development process.     

Automating and improving the data quality of a nursing department quality management program at a university hospital

BACKGROUND: The development and implementation of a relational database program for nursing quality management at a university hospital was stimulated by a lack of consistent data management and analysis tools in the existing noncomputerized program. PROGRAM DEVELOPMENT AND IMPLEMENTATION: An initial software prototype implemented in the critical care service included data collection instruments for five areas: medication errors, patient falls, returns to an intensive care unit within 48 hours, hospital-acquired skin breakdown, and unplanned extubations. Access to the database was limited and paper reports only were disseminated on a scheduled basis. In a second phase, the database is being deployed throughout the nursing department using a local area network. Nurse managers will enter and interact with the quality database online and have access to graphics, reports, and action plan development. POSSIBLE ERRORS: A wide range of potential errors influences decisions on how to collect, store, retrieve, and process quality management data. Each type of error affects the nurse manager's ability to identify significant patterns or trends that are amenable to intervention. There is no right way of constructing and implementing a quality improvement database; only an optimum balance between cost, complexity, and efficacy. SUMMARY AND CONCLUSIONS: Initial feedback from end uses has been positive. A three-year experience with a personal computer database suggests that the personal computer-based information technology is appropriate for small to medium applications and can support departmentwide CQI efforts. A case scenario using simulated data is included to illustrate the use of computerized reports in assessing and taking action on an increase in falls.     

Transient operation of a catalytic liquid-liquid plug flow reactor for kinetics measurements

A centrifugal partition chromatograph (CPC) was used as a liquid-liquid catalytic reactor for the isomerisation of hexen-3-ol into ethylpropylketone with a water soluble rhodium catalyst. Global mass transfer coefficients were measured and shown to depend on both the nature of the solute and the flow rate. Liquid-liquid partition isotherms were also determined with the CPC using elution chromatography. Finally, a reactor model was derived to account for the experimental results obtained both under stationary and transient (pulse) conditions. A parameter sensitivity evaluation is also presented.     

Synthesis and release of ATP by soluble mitochondrial F1 in complex with its inhibitor protein during dimethylsulfoxide-water transitions

Soluble mitochondrial F1 and F1 in complex with the natural ATPase inhibitor protein (F1-IP) catalyze the spontaneous synthesis of [gamma-32P]ATP from medium [32P]phosphate and enzyme-bound ADP when incubated in media with dimethylsulfoxide (Me2SO); under these conditions, the synthesized [gamma-32P]ATP is not released into the media, it remains tightly bound to the enzymes [Gómez-Puyou, A., Tuena de Gómez-Puyou, M. & de Meis, L. (1986) Eur. J. Biochem. 159, 133-140]. Some of the characteristics of the synthesized [gamma-32P]ATP were studied in F1 and F1-IP (ATPase activities of 70 and 1-3 micromol x min(-1) x mg(-1), respectively). In Me2SO media, gamma-phosphate of synthesized ATP in F1 or F1-IP exchanges with medium phosphate. From the rates of the exchange reaction, the half-times for hydrolysis of the synthesized ATP in F1 and F1-IP were calculated: 45 min and 58 min for F1 and F1-IP, respectively. The course that synthesized [gamma-32P]ATP follows after dilution of the Me2SO synthetic mixture with aqueous buffer was determined. After dilution, the half-life of synthesized ATP in F1 was less than 1 min. In F1-IP, ATP was also hydrolyzed, but at significantly lower rates. In F1-IP, dilution also produced release of the synthesized [gamma-32P]ATP. This was assayed by the accessibility of [gamma-32P]ATP to hexokinase. About 25% of [gamma-32P]ATP synthesized in F1-IP, but not in F1, was released into the media after dilution with aqueous buffer that contained 20 mM phosphate. Release of tightly bound ATP required the binding energy of phosphate and solvation of F1-IP, however, the particular kinetics of F1-IP were also central for medium ATP synthesis in the absence of electrochemical H+ gradients.     

TraceLink: a model of amnesia and consolidation of memory

This investigation examined the feasibility of applying the conductance catheter technique for measurement of absolute aortic segmental volume. Aortic segment volume was estimated simultaneously in vitro by using the conductance catheter technique and sonomicrometer crystals. Experiments were performed in five isolated canine aortas. Vessel diameter and pressure were altered, as were the conductive properties of the surrounding medium. In addition, a three-dimensional finite-element model of the vessel and apparatus was developed to examine the electric field and parallel conductance volume under different experimental conditions. The results indicated that in the absence of parallel conductance volume, the conductance catheter technique predicted absolute changes in segmental volumes and segmental pressure-volume relationships that agreed closely with those determined by sonomicrometry. The introduction of parallel conductance volume added a significant offset error to measurements of volume made with the conductance catheter that were nonlinearly related to the conductive properties of the surrounding medium. The finite-element model was able to predict measured resistance and parallel conductance volume, which correlated strongly with those measured in vitro. The results imply that absolute segmental volume and distensibility may be determined only if the parallel conductance volume is known. If the offset volume is not known precisely, the conductance catheter technique may still be applied to measure absolute changes in aortic segmental volume and compliance.     

Optimization of the properties obtained by quenching in martensitic stainless steels X30-40Cr13 and X40-60CrMoV14

An experimental study of the effects produced by different parameters of the heat-quenching cycle permitted the optimization of the properties typical of these martensitic stainless steels: hardness and corrosion resistance. The results obtained demonstrate that the heating temperatures currently used in industrial quenching treatment of these steels should be modified.     

Establishment and characterization of three cell lines from Aedes triseriatus (Diptera: Culicidae)

The objectives of this study were to develop sex-, age-, and body size-specific nomograms and partition values for upper and lower limits of M-mode echocardiographic aortic root measurements derived from a large population-based cohort. The study sample consisted of 1433 male and 1816 female participants in the Framingham Heart Study and Framingham Offspring Study who were normotensive and free of clinically apparent heart disease at the baseline examination. Aortic root measurements were obtained by M-mode echocardiography by a leading-edge to leading-edge technique. The relations of age and measures of body size with aortic root dimensions were evaluated with sex-specific correlations and multiple stepwise linear regression analyses. Age was the most important determinant of aortic root size in both men and women in the multivariable regression models. Models with age and body surface area yielded R2 values of 0.214 in men and 0.222 in women. Models with age and height yielded lower R2 values of 0.136 in men and 0.181 in women. Thus aortic root dimensions vary widely with the age, sex, and body size of individuals. Sex-specific reference nomograms of aortic root dimensions in relation to age and body size (body surface area or height) are presented to facilitate the detection of abnormalities of aortic root size.